Convective Heat Transfer in a Circular Tube with Short-
Length Twisted Tape Insert
Final Year Project for Students at the Air Conditioning and Refrigeration Techniques Engineering Department, Al-Mustaqbal University College
The present work is an experimental mixed device components
heat transfer considering the new design of 1- An electric pump the circular shape. The fluid used was water 2- Pressure Gage that circulates within closed thermal systems. 3- An electric board Creating a nucleus of technicians to develop 4-flow meter the industry and production of air 5-Test tube conditioning, refrigeration and heating devices at the national level with a quality not less than the quality of industry and production in the Middle East.
OBJECTIVES
Indicate the search variables
Know the components of the device Knowing how heat is transferred by Experimental test was performed to convection in a round tube with a short- investigate the heat transfer (Nusselt length twisted bar. Number) and pressure drop (friction factor) for laminar flow rate. Twisted tapes as Experimental work enhancement device was used to investigate the enhancement level. The present figure The pilot rig consists of a short-length torsion- shows in details all the part of the test rig that bar circular chute, an insulated electric heater is consist of three main parts: The hot water as well as a pressure gauge, 5 thermocouples, a flow rate meter, and a temperature at specific circuits, the test section and the measuring locations. 2 water tanks and a pump were also devices installed to supply the water with the required driving force through the systems. The heat flow was provided by the power supply.
Supervisor: Asst . Prof. Dr . Azher M . Abed; Ass. Lec. Zainab A. Farhan
DDM or Direct Distance Measurement - This Is Mainly Done by Chaining or Taping. ODM or Optical Distance Measurement - This Measurement Is Conducted by Tacheometry