Professional Documents
Culture Documents
Series # of Ports # of Contacts Contact Plating Contact Tail Shielding Connector Type Variations
Series # of Ports # of Contacts Contact Plating Contact Tail Shielding Connector Type Variations
A0 0 – 1 08 - 2 6 0 - 45 0
Series
# of Ports
# of Contacts
Contact Plating
Contact Tail
Shielding
Connector Type
Variations
FEATURES Series
A0 Modular Jacks
Top performance for high speed networking, A1 Modular Plugs
voice and data applications
# of Ports
Meets FCC 68 requirements
Depending on requirement
ISDN standard
Industry standard footprint and height with low Total # of Contacts
profile options available 2-96 Depending on configuration
Available with or without shielding
Ganged and / or stacked for multiple port Contact Plating Code
requirements 2 gold flash
Advanced EMI/RFI protection 3 15u” gold
Both plugs and jacks can be fully or partially 6 30u” gold
9 50u” gold
loaded
Contact Tail Type
2 Vertical
6 Right angle
9 Surface Mount
SPECIFICATIONS
Shielding
Modular jack housing: PBT polyester, UL94V-O 0 Unshielded
Modular plug housing: Polycarbonate, UL94V-2 1 Metal Shield (Ground Back)
Operating temperature: -40 + 80 degrees C 2 Metal Shield (Ground Front)
Contact: Phosphor bronze, gold on contact 3 Half Metal Shield
area, Tin/lead over nickel on tails
Voltage: 1.25V Connector Type
45 Category 5
Current: 1.5A
Contact resistance: 20 milliohms maximum Variations
Dielectric withstanding voltage: 1000 VAC 0 No Key (low profile)
Insulation resistance: 500 M ohms minimum 1 Keyed (low profile)
2 No Key (high profile)
3 Keyed (high profile)
4 Vertical with flange
5 Vertical no flange
Authorized Distributor
EDAC:
A00-108-662-450 A00-108-622-450 A00-108-620-450 A00-108-660-450 A00-216-272-450 A00-432-260-450 A00-
216-260-450