Professional Documents
Culture Documents
Tester
Tester
Tester
Tester
Operation Manual
(Please do read this manual carefully before operation)
锦辉试验设备制造厂
Kingwells Test Equipment Mfg., Ltd.
Preface
Thank you for purchasing our equipment. We provide not only good quality products but also
reliable after sale service.
This manual is for use of operators of this equipment. It is highly recommended that the
operators to read and understand this manual before operating the equipment with special
attention to warnings and cautions. The manual details the working principles, construction
and features, operation instruction and maintenance of the equipment. Those texts “Test
Specified” or “Standard” mentioned in this manual are for reference only, please cross check
with relevant standards or data for correct information.
Contents
一、Working Principles‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥1
二、Construction and Features ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥1
三、Operation Instructions‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥1-5
四、Installation and Handling ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥6
五、 Cautions and Maintenance‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 6
六、Technical Specifications‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥6-7
1 Working Principles:
KW-BFM-09 Chair Swivel Durability Tester is a model of test equipment which adopts integrated
and digital control technology. It contains 2 parts: electrical and mechanical systems. The electrical
system is comprised of touch screen, PLC and other electrical parts, easy to operate; The mechanical
system uses a cylinder to apply the test load on seating surface, and the positive/negative electric
motor drives the plate (where chair sample is secured on) rotating as standard specifies. It applies
widely to office chairs and other furniture tests.
2 Construction Features
Cylinder
Force Meter
Control box
Manual pressure
regulating valve
Loading Pad
Fixing
bolts
Force applying mechanism can
move frontward/backward by
loosing this knob
Fig. 1
1
2 Operation Instructions
2.1.1 Adjust the positions of the fixing bolts on Chair Center Locating Template (CCLP) and place
the chair base in between the bolts, then turn clockwise the inner circle of the CCLP so that each two
neighboring bolts can clamp the legs tightly. (Fig 2)
Turn clockwise
to clamp legs
Fig.2
2.1.2 When the base is fixed, turn left the knob of Manual Pressure Regulating Valve (MPRV) to
discharge the air pressure, then press down the Hand Valve (HV) and turn right the knob of MPRV
until specified force value is attained (the force value is displayed from the Force Meter which is
installed at top right of the body. (see Fig.3)
2
Force Meter
MPRV and HV
Fig.3
2.2.1Turn on the power switch at back of control box, wait 5 – 10 seconds then enter system interface.
(Fig 4)
3
Click to
Enter
Fig.4
2.2.2 Click OK and come to Access Input (Fig 5). Key in number “1”for Operator Account and “123456”for
Operator Password (original and changeable), then press “Confirm” to enter Work Mode Options. (Fig.
6)
点击输入密码
图5
4
点击进入
图6
2.2.3 Select the work mode and click “OK” to enter and set up, or click RETURN to
go back to previous page, see Fig. 7
Fig. 7
Fig.8
Angle Rotating
减速角度
Reset for
new test
6
3 How to shut off the machine
3.1 To shut off the machine, press red button STOP, and snap the hand valve upward to
discharge the load, then shut off the power switch at back of control box, lastly turn off
the air source.
3.2 To guarantee the lifetime, ensure to shut off the power and air source when not in use.
Warning: Keep the machine far from magnetic field, corrosive and shaking environment.
5.1 Cautions:
6. Technical Specifications:
Air Pressure:≥0.5MPa
Air Source Air Flow:≥800L/min
Air must be filtrated and dried
8
Special Statements:
1. We are committed to continuous improvement and upgrade of our products, so the real equipment
prevail this manual (description, figures or illustrations) if you find there is difference between them.
2. Those texts “Test Specified” or “Standard” mentioned in this manual are for reference only, please cross
check with relevant standards or data for correct information
3. This manual shall not be used as basis for any requests from Kingwells.
Please call us or send written messages if you have any inquiries, our engineers always
Stand by to provide professionals technical support.
东莞市锦辉试验设备制造厂
Kingwells Test Equipment Mfg.,Ltd.
地址:广东省东莞市南城区白马方屋氹村 1 巷 1 号
电话: 86-769-22906728
传真: 86-769-22909619
Web: www.kingwells.com
Kingwells E-Mail: info@kingwells.com