Professional Documents
Culture Documents
Door Shutter - Checklist
Door Shutter - Checklist
Contractor :-
Client :-
Consultant :-
CHECKLIST FOR DOOR SHUTTER
Block :- Date :-
Unit No / Location :- Floor :-
Ref Dwg No. :
Sl Description of Items Required Actual Conformity Remarks
No (Checked by (Random Sampling
Contractor) by C&W/ Client)
8 Tower Bolt are of ISI / Approved Brand Verified & Found YES / NO
OK / NOT OK
9 Door Handle are of ISI / Approved Brand Verified & Found YES / NO
OK / NOT OK
10 Door Lock are of ISI / Approved Brand Verified & Found YES / NO
OK / NOT OK
11 Door Stopper are of ISI / Approved Brand Verified & Found YES / NO
OK / NOT OK
12 Primer & Paint are of ISI / Approved Brand Verified & Found YES / NO
OK / NOT OK
14 Flush Door Shutter confirm to the 1. End Verified & Found YES / NO
Immersion Test.2. Knife Test 3. Glue OK / NOT OK
Adhesion Test
DURING INSTALLATION CHECKLIST
13 Number of Hinges are as per drawing. Verified & Found YES / NO
OK / NOT OK
14 The door Shutter is in plumb and line after Verified & Found YES / NO
Installation. OK / NOT OK
Page 1 of 2
15 The fitting of hinges with screws in such a Verified & Found YES / NO
fashion that all the screws are fixed with OK / NOT OK
Frame & Shutter.
16 Location, Dimension & Alignment of Tower Verified & Found YES / NO
Bolt are as per specification. OK / NOT OK
22 Gap between Frame and shutter are within Verified & Found YES / NO
acceptable limit. OK / NOT OK
23 Surface alignment of Door & Frame are within Verified & Found YES / NO
acceptable limit. OK / NOT OK
28 Check the 1st coat is sufficiently dry 6-8 hours Verified & Found YES / NO
before application of the 2nd coat. OK / NOT OK
32 Check door should be left clean and Verified & Found YES / NO
free from dirt, putty and other adhering OK / NOT OK
material after the work is over
Page 2 of 2