Professional Documents
Culture Documents
RC One Way Slab Design
RC One Way Slab Design
Tedds\Data\Bitmaps\Tedds.bmp
Calcs for Start page no./Revision
1
Calcs by Calcs date Checked by Checked date Approved by Approved date
H 4/17/2024
8 in
One-way continuous
6.000
8.00
1.00
4000
60000
29000000
0.002
0.005
1.00
1.300
3.000
No. 6 @ 8 in o.c.
4.63
0.85
b1 = 0.85
4.6
C:\Program Files (x86)\Tekla\Structural\ Project Job no.
Tedds\Data\Bitmaps\Tedds.bmp
Calcs for Start page no./Revision
2
Calcs by Calcs date Checked by Checked date Approved by Approved date
H 4/17/2024
0.018
0.018
1.002
0.0018
0.130
0.063
0.663
PASS - Area of steel provided - OK
40000
12.000
8.000
PASS - Spacing of bars (+ve moment steel) less than maximum allowable
0.97
1.147
0.0091
Tensile strain exceeds minimum required, design OK
1.300
0.9
13.710
12.339
PASS - Design flexural strength exceeds required flexural strength
No. 4 @ 12 in o.c.
0.196
0.0018
0.130
PASS - Area of transverse steel provided OK
18.000
12.000
PASS - Spacing of transverse bars is less than allowable
3.000
1.00
0.012
6.418
6.418
4.814
PASS - One-way shear capacity
C:\Program Files (x86)\Tekla\Structural\ Project Job no.
Tedds\Data\Bitmaps\Tedds.bmp
Calcs for Start page no./Revision
3
Calcs by Calcs date Checked by Checked date Approved by Approved date
H 4/17/2024
1.000
PASS - Cover to steel resisting positive moment exceeds allowable minimum cover
fdensity = 1.00
24.000
16.000
PASS - The slab thickness is adequate to control deflection