Professional Documents
Culture Documents
Pilot operated check valve, types SV、SL... L4X
Pilot operated check valve, types SV、SL... L4X
1.9
Pilot operated
check valve
Type SV / SL...L4X
Sizes 10 to 32
Up to 315bar
Up to 550 L/min
Contents Features
Function and configurations 02 - For sub-plate mounting,
Symbols 02 porting pattern conforms to DIN 24 340 Form D,
Ordering code 03 ISO 5781
Technical data 03 - For threaded connection
Characteristic curves 04 - With or without drain port
Unit dimensions 05-07 - With or without unloading function
·sub-plate mounting valve 05 - 4 cracking pressures
·threaded connection valve 06-07
Ordering code for threaded connection
valve type SV/SL series 30 07
0047
02/08 Hengli hydraulic | Hydraulic components Check valves | Type SV / SL...L4X
6 Area A1
X
01 7 Area A2
8 Area A3 A
Y
B
9 Area A4 X
X A B X Y A B
SV and SL valves are hydraulic pilot operated pressure applied to the control piston (4) a certain
check valves in poppet type design which may be minimum pilot pressure is necessary.
opened to permit reverse flow.
These valves are used for the isolation of Type SV...A...and SL...A... (with pre-opening)
operating circuits under pressure, to prevent This valve has a additional decompression
a load from falling or creeping movements of feature. When pressure is applied at control port
hydraulically locked-in actuators. X the control piston (4) is pushed to the right. The
Basically these valves consist of housing (1), ball poppet(5.1) leaves first then the poppet (2)
poppet
28 (2), compression spring (3), control28spool leaves from the seat. Now the valve may also have
Size 10 Size 10
Pressure differential (bar)→
(4) 24
as well as a optional pre-opening ball poppet
24 a flow from B to A.
valve (5).
20 20 Because of the pre-opening there is a dampened
16
4
16
4 decompression of the fluid under pressure to
Type SV (without 3 drain port) avoid possible pressure shocks.
12 12
3
The valve permits 1free-flow from A to B. In the 2
8 8
2
reverse direction, the poppet (2) is held firmly on Type SL... (with drain port )
4 4
1
to its seat in addition to the spring force by
0 25 50 75 100 125 150 0 the25 50 The 75
function of this
100 125 150valve corresponse to the valve
system pressure.
Flow (L/min) →
SV .
Flow (L/min) →
By applying
20 pressure at control port X the control
Size 20
20 The difference is the additional leakage port Y. The
Size 16 and 20
piston
17.5 (4) is moved to the right. This lifts17.5 the annular area of the control piston (4) is separated
Control pressure (bar)→
poppet
15 (2)4from the seat, then fluid flows 15 from B4 from port A. The pressure at port A only effects
to A.10 3
10 area A4 (9) of the control piston (4).
In order to
2 ensure the valve opens due to the
7.5 7.5 3
2 5
5
1 1
2.5 2.5
SymbolsFlow
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
(L/min) → Flow (L/min) →
Type SL..PB.-L4X/...
A B
0 100 200 300 400 500 550 0 100 200 300 400 500 550
X Flow (L/min) →(with drain port, without pre-opening)
Flow (L/min) →
ressure (bar)→
100 100
3
0048
80 1 80
60 60
1 2
40 40
Check valves | Type SV / SL...L4X Hydraulic components | Hengli hydraulic 03 /08
Ordering code
S - L4X /
*
Further details in clear text
No leakage port = V 01
No code = NBR seals
With leakage port = L
V = FKM seals
Technical data
Nominal size 10 16 20 25 32
Sub plate mounting kg 2.1 4.7 7.8
Weight
Threaded connection kg 2.5 5.7 5.7 10 10
Installation position Optional
Flow direction From A to B free, from B to A through opening
Operating pressrure bar To 315
Port pilot pressure bar 5 to 315
Control capacity -Port X cm3 2.5 10.8 10.8 19.27 19.27
-Port Y(only type SL) cm3 2 9.6 9.6 17.5 17.5
Control area-area A1 cm2 1.33 3.46 3.46 5.72 5.72
-area A2 cm2 0.33 0.7 0.7 1.33 1.33
-area A3 cm2 3.8 10.17 10.17 16.61 16.61
-area A4 cm2 0.79 1.13 1.13 1.54 1.54
Viscosity range mm2/s 10 to 800
-30 to +80 (NBR seal)
Fluid temperature range ℃
-20 to +80 (FKM seal)
Mineral oil suitable for NBR and FKM seal
Fluid
Phosphate ester for FKM seal
Maximum permissible degree of fluid contamination:
Degree of contamination
Class 9. NAS 1638 or 20/18/15, ISO4406
0049
04/08 Hengli hydraulic | Hydraulic components Check valves | Type SV / SL...L4X
2 3bar
01 20 20
3 6bar
16 16
4 4
12 12
4 10bar
3 3
8 8
- - -
2 1 2
4 4
B to A
1
0 25 50 75 100 125 150 0 25 50 75 100 125 150
Flow (L/min) → Flow (L/min) →
1 2.5 bar
17.5
Control pressure (bar)→
17.5
2 5bar
15 4 15 4
3 7.5bar
10 10
3 3
7.5
4 10bar
7.5
2 2
5 5
2.5
1
2.5
1 - - -
B to A
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350
Flow (L/min) → Flow (L/min) →
16
Size 30
16
Size 25 and 30 A to B Cracking pressure
Pressure differential (bar)→
1 2.5bar
14 14
12 12
2 5bar
4 4
10 10 3
3 7.5bar
3
8 8
4 10bar
6 2 6 2
- - -
4 1 4 1
2 2
B to A
0 100 200 300 400 500 550 0 100 200 300 400 500 550
Flow (L/min) → Flow (L/min) →
100
2 Limit value
100
3
80 1 80
3 Poppet
60 60
4 Pre-opening ball
1 2
40 40 4
poppet valve
2
20 20
0 60 120 180 240 300 330 0 60 120 180 240 300 330
Load pressure (bar) → Load pressure (bar) →
0050
Check valves | Type SV / SL...L4X Hydraulic components | Hengli hydraulic 05 /08
H1
H3
port is closed)
H2
5
4 A Y L2 5 Φ11 Φ6 2 Name plate
B1 3
3 Locating pin
L1 L3 6
L5 L4 4 O-rings
L7 L6
L9
Size 10
L10
L8
2
-Ports A and B 17.12×2.62
B5
0.01/100mm
- Ports X and Y 10×2.5
Y
0.8 Size 20
-Ports A and B 24×3
-Ports X and Y 10×2.5
B4
A B
B2
B3
2×ΦD1
Y
A
B5
B Φ7;6
B2
B4
0051
06/08 Hengli hydraulic | Hydraulic components Check valves | Type SV / SL...L4X
Y
01
Y A
H1
A
H2
L2 Φ11H13 4
L1 L3 B1
5
6
L5 L4
L6 L10
L8 1 Port Y with valve type "SL"
7 L7 (with valve type "SV" this port is
closed)
2
X B
2 Name plate
5 Valve with cracking pressure
versions "1" and "2" (dimension L2)
B3
A L9 Ports
Type Size
1
Y A, B X, Y
7
10 G1/2 M22×1.5
Caution: 16 G3/4 M27×2
G1/4
On threaded connection valves, series L4X and series SV 20 G1 M33×2
M14×1.5
30 have different connection dimensions. 25 G11/4 M42×2
If series 30 valves need to be replaced by series L4X 32 G11/2 M48×2
ones, the pitch of installation holes and the position 10 G1/2 M22×1.5
of external tapping shall be changed. 16 G3/4 M27×2
G1/4
And as for the series 30 threaded connection valves, SL 20 G1 M33×2
M14×1.5
their configuration and connection dimensions see 25 G11/4 M42×2
the Ordering code on next page. 32 G11/2 M48×2
H1
Type Size L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 B1 B3 B2 B3 H1 H2
Inch:G1/4
B3 Metric:M14×1.5
10 100.8 15.5
T1 15.5 87.8 13 1256.5 10.5 33.5 22.5 17.3 87 66.7 33.4 44 22
Only for SL10, 1
SV 15,20
16;20 133
version Y 17.7 47.7 115 18 74.5 17 suitable
1 Only 50.5 for
36 27 105 79.4 39.7 68 34
25;32 156.1 35.7 45.7 134 22.1 101 24 84 49 18 130 96.8 48.4 86 43
SL25,30 version Y
Y X
10 100.8 15.5 15.5 87.8 13 56.5 10.5 33.5 22.5 17.3 87 66.7 33.4 44 22
SL 16;20 133 17.7 47.7 115 18 74.5 17 50.5 36 27 105 79.4 39.7 68 34
A B
ΦD1
25;32 156.1 35.7 45.7 134 22.1 101 24 84 49 18 130 96.8 48.4 86 43
L7(L9)
L5
Φ10.5
51.5
L4
68.5
L6
L1
L3
L2
L8
Locating hole
B1 0052
B2
Check valves | Type SV / SL...L4X Hydraulic components | Hengli hydraulic /08
07
A B
ΦD1
L7(L9)
L5
Φ10.5
51.5
L4
68.5
L6
L1
L3
L2
L8
Locating hole
B1
B2
Note: Dimension L7 suits valve with opening pressure types "1" and "2",
and dimensionL9 suits valve with opening pressure types "3".
S V - 30 /
*
No leakage port = V Further details in clear text
With leakage port = L
No code = NBR seals
Nominal size10 = 10 V = FKM seals
Nominal size15 = 15
No code = Inch
Nominal size 20 = 20
2 = Metric
Nominal size25 = 25
Nominal size30 = 30 30 = Series 30
Threaded connection = G
1 = Opening pressure 3 bar
With pre-opening(standard version) =A 2 = Opening pressure 5 bar
No pre-opening =B 3 = Opening pressure 8 bar
0053
08/08 Hengli hydraulic | Hydraulic components Check valves | Type SV / SL...L4X
01
0054