Professional Documents
Culture Documents
Assessment Machine 1
Assessment Machine 1
Assessment Machine 1
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
Non
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
No thing
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
For the machine design course, I found the topics really interesting. It was cool to
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
learn about theories of failure and how they apply in real-world scenarios. Overall, I
………………………………………………………………………………………………………………………………
think the course covered a wide range of important topics and provided a good
………………………………………………………………………………………………………………………………
foundation. I don't have any specific suggestions for improvements. I think this
………………………………………………………………………………………...................................................
course was well-taught which makes it hard to think of anything that could make it
…………………………………………………………………………………………………………
better.
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
The course is designed in a way to simplify the learning of designing a machine .
………………………………………………………………………………………………………………………………
More visual representation could be helpful
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
every thing is perfect and the dr. make this course very easy .
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
The professor's expertise and commitment to fostering a dynamic learning environment
………………………………………………………………………………………………………………………………
greatly contributed to my understanding of machine design. Their insightful guidance
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
and willingness to address questions have been instrumental in making the course
………………………………………………………………………………………………………………………………
engaging and intellectually rewarding. I appreciate their dedication to enhancing our
………………………………………………………………………………………………………………………………
………………………………………………………………………………………...................................................
learning experience. I would greatly appreciate taking Machine Design ll with the same
…………………………………………………………………………………………………………
professor.
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
prof. Abdelhamid was always ready for the lecture, he also made the material very very simple and explained
everything in a way thats fun and easy to remember. there is nothing to improve because its already done perfectly.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
The course was made easy and enjoyable by Prof.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
Abdelhamid, he teaches with passion and understands
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
students’ needs. Great course and great professor.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………
United Arab Emirates University
College of Engineering
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
For each of the abilities, attributes, and skills listed below, please check the appropriate box that corresponds to the
extent you feel the class has helped you to achieve over the course of the semester.
Very High
Very Low
Course intended outcome
(by completing this course, students are able to:)
1 2 3 4 5
6. Understand and apply the design procedures to power screws and fasteners.
7. Understand and apply the design procedures for belts (PO3, PO1)
8. Carry out a full component design within a team and develop skills for
communications
10. Develop skills for self-learning and use of contemporary issues relevant to machine
design.
Please use the space below to bring to the attention of the Department any comments or suggestions for
improving the effectiveness of the course. Also, include comments about issues such as the adequacy of
your preparation in prerequisite courses, if applicable.
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
No thing
………………………………………………………………………………………...................................................
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………