Professional Documents
Culture Documents
NABM 10Nm (S1)
NABM 10Nm (S1)
NABM 10Nm (S1)
Product Features
■ Torque 10 Nm
■ Valve size DN40(11/2“), DN50(2“)
■ Power Supply AC/DC 24 V
■ Control Modulating DC 0(2)…10 V
■ 1 adjustable auxiliary switch (SPDT)
■ Shaft dimensions
9.0 mm square (fixed)
■ Selectable direction of rotation
■ Actuator with 1000 mm cable connection
■ Customer version on request
59
NABM Series
Ball Valve Actuator 10 Nm
Modulating Control
161
137
47
1000
85
151 144
88
54
37
53
37
Technical Specifications
NABM 1.1…(S1)
Torque 10 Nm
Valve Size DN40(11/2“), DN50(2“)
Shaft dimensions 9.0 mm square (fix)
Power Supply AC/DC 24 V ± 10%
Frequency 50 - 60 Hz
Control Signal (Input) DC 0(2)…10 V
Position Signal (Output) DC 0…10 V
Power Consumption
- Operating 6.0 W
- End Position 2.0 W
For Wire Sizing 6.5 VA
Protection Class III III
60
NABM Series
Ball Valve Actuator 10 Nm
Modulating Control
M
Factory-set CCW!
black red orange yellow green
1 2 4 5 6 The direction of rotation CW CCW
can be changed by
pushing the CW/CCW
switch on the actuator’s
housing.
Y Y U
a
M Switch a factory-set at
5º <45º >45º
5º 85º
a = 5º
3 (1.5) A, AC 250 V S2 S2
Actuator at 0º S1 S1
S3 S3
M
black red orange yellow green
1 2 4 5 6
Y2 Y1
DC 0(2)...10 V
0(4)...20 mA
AC 24 V ± 10% max
DC 24 V ±10%
61
NABM Series
Ball Valve Actuator 10 Nm
Modulating Control
Coil
0°
close
(ALWAYS CCW!)
90°
Important Remark
Consult NENUTEC representatives for specific requirements and material selections for your intended application.
This actuator includes electrical and electronic components and may not be disposed as household garbage. Please consider the local valid legislation.
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products.
62