Professional Documents
Culture Documents
Modern Farmhouse Bed Frame
Modern Farmhouse Bed Frame
com
Learn how to easily build a pretty and affordable twin bed frame!
This bed cost me about $90 in lumber plus $30 in paint and primer, for a total of
$120 to build.
MATTRESS SIZING: The mattress opening for this twin bed frame is 75″ x 39″
which left a little extra room around our specific twin mattress and box frame.
Adjust measurements as needed if your box spring/mattress is a different size.
Thanks!
Sold to
diogopronto99@gmail.com
Modern Farmhouse Bed Frame v 1.0 1
Mr. Stukov https://mrstukov.com
Materials Tools
(2) 4×4 @ 8’
Kreg Pocket-Hole Jig 320
(4) 2x6 @ 8’
Speed Square
(2) 2x2 @ 8’
DEWALT 20V MAX XR Brushless Impact Driver and Hammer Drill
(4) 1x4 @ 10’ Combo Kit
Primer
Stain
Parts List
Use a miter saw and make the cuts listed below for the headboard, footboard, side rails and slats.
For optimal cutting cut lumber in the following order:
1st 4x4: @43’’ - Footboard top rail @32.5’’ - Headboard post @15.5’’ - Footboard post
2nd 4x4: @43’’ - Headboard top rail @32.5’’ - Headboard post @15.5’’ - Footboard post
After cutting I advice to sand pieces with 80 grit sandpaper with orbital sander.
Step 1: Footboard
Step 1.1
Step 1.2
Step 1.3
Step 2: Headboard
Step 1.1
Add pocket holes to the Headboard slats (6) and Headboard posts (4).
Step 1.2
Step 1.3
Step 3: Siderails
Step 1.1
Add pocket holes to the Side rails (7) and Slat support rails (8) as shown on the pictures
below.
Step 1.2
4.1 Move the bed frame in place where you want it.
4.2 Then use some scrap 2x4s cut to 10″ (B)
to hold up the side rails in place and
attach them to the headboard and footboard
with 2 1/2″ Kreg screws.
Finally, attach the 12 slat boards to the side 2×2 slat support rails on the side rails
with 2″ wood screws. Space about 2.75″ apart.
Final thoughts
This is first version of build instruction. So I will be grateful if you share your
experience and any improvements to the instruction.
I hope this twin size bed frame tutorial has been helpful! If you build this, please
share with me on social media, I’d happy to see, @mr.stukov
Follow along for my latest projects and sneak peaks on Instagram and YouTube.