Professional Documents
Culture Documents
X Ray13
X Ray13
Correct setting
Setting to be changed: Set the general-purpose serial port Ch1 and Ch6 to “0”.
*This setting is not displayed on the Maintenance Tool screen in the Maintenance Program
Ver4.**. In this case, please use Maintenance Tool found in the CD-R attached to
Maintenance Program Ver5.** .
Log_file1.txt at malfunction
02/15/02 11:01:44 ++++++++++++++ DICOM PROGRAM Shutdown.
++++++++++++++
02/15/02 11:07:11 C:¥Option¥log directory exist.
02/15/02 11:07:11 ************** DICOM PROGRAM Startup.
**************
02/15/02 11:07:11 Option: DICOM=1,MO=0,CDR=0
02/15/02 11:07:11 MAIN: adapter_ID=2,SCSI_ID=5,Inquiry=Shimadzu
02/15/02 11:07:11 OS is WindowsNT
02/15/02 11:07:11 ROOT_DISK drive letter=C
02/15/02 11:07:11 DATA_DISK drive letter=D
02/15/02 11:07:11 FreeSpace(caller available) of Drive C: is
746520576(bytes)
02/15/02 11:07:11 FreeSpace(total bytes) of Drive C: is
746520576(bytes)
02/15/02 11:07:11 Root disk free space = 746 (MB)
02/15/02 11:07:11 FreeSpace(caller available) of Drive D: is
3227963392(bytes)
02/15/02 11:07:11 FreeSpace(total bytes) of Drive D: is
3227963392(bytes)
02/15/02 11:07:11 Data disk free space = 3227 (MB)
02/15/02 11:07:11 D:¥data directory exist.
02/15/02 11:07:11 D:¥data¥XFER directory is created.
02/15/02 11:07:11 C:¥Option¥tmp directory exist.
02/15/02 11:07:11 D:¥data¥MO directory is created.
02/15/02 11:07:11 Request timer start. <<The program
does not run.
Log_file1.txt at normal setting