Professional Documents
Culture Documents
RT Tracer
RT Tracer
RT Tracer
PIPE
RT MARKING
0
0
1 5
WELD JOINT PIPE
PIPE
2 4
1
3
TOP VIEW SIDE VIEW
STEPS:
1 Check the issued Tracer for RT rejected joint.
2 Check the defect/s location as per Tracer.
3 Identify RT Marking on the pipe.
4 Check the Arrow direction on RT Marking.
5 Put the Tracer to the corresponding location base on RT Marking.
6 Identify defect/s location/s base on the Tracer to Pipe.
NOTE:
STARTING POINT SHALL BE AS PER ARROW DIRECTION.