Professional Documents
Culture Documents
q2 w2 Summative
q2 w2 Summative
q2 w2 Summative
E 7- HOUSEHOLD SERVICES
SUMMATIVE TEST – WEEK 2
1. It is a device that uses an air pump to create a partial vacuum to suck up dust and dirt, usually from floors, and
optionally from other surfaces as well.
a. floor buffer b. vacuum cleaner c. floor buffer d. floor scrubber
4. The following are the steps in using the vacuum cleaner EXCEPT:
a. Check the vacuum's height
b. Install the brush and reposition the machine upright. Plug in
c. Move All Of The Smaller Items Out
d. Wash the vacuum brush
7. Comb the bristles and repeat the cleaning process is the _______ step in using the vacuum cleaner.
a. 8th b. 3rd c. 5th d. 4th
9. It is an electrical appliance that is used to clean and maintain non-carpeted floors, such as hardwood, marble, tile or
linoleum.
a. floor buffer b. vacuum cleaner c. floor buffer d. floor scrubber
10. The following are the steps in using the floor buffer EXCEPT:
a. Comb the Bristles and Repeat the Cleaning Process
b. Lower the handle to your waist and lock it in place. Balance the machine on the brush. Turn it on.
c. Start polishing the floor at the back wall and move backward toward the center of the room.
d. Lower the handle to go left and lift the handle to go right. Let go of the handle to stop.
11. Which among these is the second step in using floor buffer?
a. Lower the handle to go left and lift the handle to go right. Let go of the handle to stop.
b. Start polishing the floor at the back wall and move backward toward the center of the room.
c. Lock the handle in an upright position, then lay the polisher back on a hard surface.
d. Install the brush and reposition the machine upright. Plug it in.
12. Turn the machine off when finished. Unplug it. Remove and clean the brush. Rewind the power cord and put the
machine away is the _________ step in using the floor buffer.
a. 2nd b. 3rd c. 6th d. 4th
14. Which among these is the fifth step in using floor buffer?
a. Start polishing the floor at the back wall and move backward toward the center of the room.
b. Lower the handle to go left and lift the handle to go right. Let go of the handle to stop.
c. Lock the handle in an upright position, then lay the polisher back on a hard surface.
d. Install the brush and reposition the machine upright. Plug it in.
15. The following are true about general rules in the uses of cleaning equipment EXCEPT:
a. Check electrical appliances and equipment before use.
b. Handle equipment with care and make sure it does not bump on hard surfaces.
c. Lower the handle to go left and lift the handle to go right. Let go of the handle to stop.
d. Follow manufacturer’s operating instruction.
16-20: Choose the letter of the correct answer on the choices below.
a. Probably true b. Probably false c. Sometimes true d. sometimes false
16. A further part of a health and safety strategy is to maintain tools and equipment regularly.
17. Incorrect maintenance of tools and equipment helps to identify safety problems before they become serioushazards.
18. Anyone can carry out maintenance and kept records of their inspections.
19. Assess and control the risks is one important way to follow the rules and to manage the safe use and maintenance of
tools and equipment.
20. Employers should conduct risk assessments that cover the setting up, use and maintenance of tools and equipment
at work.