Professional Documents
Culture Documents
ZXWR RNC-GUIM Connect Port Flow Over Threshold (198005676)
ZXWR RNC-GUIM Connect Port Flow Over Threshold (198005676)
ZXWR RNC-GUIM Connect Port Flow Over Threshold (198005676)
Network Manageme
Product ZXWR RNC/FDD-BC/4G-C_NM/4G/RAN V12.13.51P60
nt Version
Equipment Hardwa Equipment Softwar
V3.13.10.15P04
re Version e Version
Board Hardware Ve Board Software Ver
V3.13.10.15P04
rsion sion
Some V3 RNC Board:9&10; GUIM boards has occur alarm “GUIM Connect port flow over threshold(198005676)"
EQRNCID=114,RACKNO=1,SHELFNO=1,SLOTNO=9,CPU
Connect port flow over threshold(198005676)
NO=1
EQRNCID=114,RACKNO=1,SHELFNO=1,SLOTNO=9,CPU
Connect port flow over threshold(198005676)
NO=1
EQRNCID=114,RACKNO=1,SHELFNO=1,SLOTNO=9,CPUNO=1
Port type:This port on panel connect to other shelves; Port index:1; Direction:Transmit direction; Port function:Media port 1; Port Flow(kbit/s):915071
Networking Environment
1) 1-1-9 GUIM port flow is too high in transmit , telnet to GUIM board , execute command : CTFC() ,check the ctrol port and media port flow of GUIM
GUIM have 4 media port , the capacity of each media port is 1G , the RNC configured threshold is 90% ,that means GUIM will occur alarm “GUIM Connect port flow o
ver threshold“ ,if tx or receive port flow exceed the threshold.
2) customer also found there are many sites have big package lost issue, suspect the site package lost is related to GUIM media port flow over threshold.
we confirmed with R&D , the GUIM media port flow over load can trigger iub package lost
3) telnet to GUIM board , execute the belowing command every 30s, check the TX/RX package lost in GUIM port
showStatChange 0
showStatChange 1
GUIM->showStatChange 1
[tShell]RUC.ge0 : 2,086,034,412 +2,086,034,412 158,880/s
[tShell]RDBGC0.ge0 : 1,056,981 +1,056,981 --------rdebgc0 means losted package in RX direction
[tShell]RDBGC1.ge0 : 11,958 +11,958
[tShell]HOLD.ge0 : 3,046,548,228 +3,046,548,228 ------hold means lost package in RX direction
https://support.zte.com.cn/support/KnowledgeBase/KLSearch/ViewKL.aspx?FormID=579542 1/3
7/24/23, 9:24 AM ZXWR RNC-GUIM Connect port flow over threshold(198005676)
[tShell]GTMCA.ge0 : 14 +14
[tShell]GTBYT.ge0 : 1,046,822,386,612 +1,046,822,386,612 85,486,401/s ---------the TX bit rate is 854Mbps
we can calculate the Package lost rate in TX direction, belowing is the formula:
TX lost package/ Transfered package=3,046,548,228/1,046,822,386,612 = 2.9*10(-3)
Solution
1) in order to decrease the TX port flow of GUIM board,plan to perform site rehoming in RNC 114 to solve the alarm
27.Jan 2016 perform 34 sites rehoming, the GUIM alarm is not disappeared, cause few of sites located in 1-1 shelf
2) after cross check the configuration,and GIPI port KPI, we found the root cause is :
Knowledge Evaluation
https://support.zte.com.cn/support/KnowledgeBase/KLSearch/ViewKL.aspx?FormID=579542 2/3