Siegel and Shuster Tribute Plaza Presentation To Cleveland Planning Commission

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 29

SIEGEL AND SHUSTER

TRIBUTE PLAZA
KEY POINTS:
o The Siegel & Shuster Society will fund
the cost for construction of the
sculptures and the infrastructure.
o The CCCFDC will maintain the Plaza in
which the sculptures sit.
o The Siegel & Shuster Society will create
a dedicated account for the long term
maintenance of the sculptures to cover
cleaning, repair, replacement of
damaged elements and any restoration
work.
o The Siegel & Shuster Society will fund
the cost of premiums and deductibles
related to insurance to cover the repair
of the sculptures in the event of
casualty, damage, theft, accident or
vandalism.
o All parties will establish a royalty free
license agreement related to the use of
the images and likeness of Superman
and the related sculptures.

LETTER OF INTENT
DC COMICS APPROVAL
SUPERMAN FIGURE AND BASE
• The Superman figure is a cast stainless steel with a low
luster finish. It will require a pressure gun water cleaning
every 3 to 4 years at the most
• The epoxy painted base can also be cleaned with a pressure
washer put on a lower blast in order not to damage the paint
while washing off the dirt
• Extra paint will be stored in case here is need to repaint any
of the surfaces that need attention. The paint itself is a
Sherwin Williams paint that is graffiti proof.

BRONZE FIGURES (SIEGEL AND SHUSTER)


• The most important attention to the bronze figures will be
waxing them twice a year in the spring
• It would be advisable that if there is visible dirt or bird
droppings on the sculpture a soft brush with water to wash
away that should be done before a fresh coat of wax is
applied. A low power spray could be use to clean the surface
but needs to be very low power spray ignorer to not take off
the brown patina.

TELEPHONE BOOTH
• Once each spring if needed the phone booth can be cleaned
on the outside only using a portable pressure washer. The
painted fiberglass clothing and telephone ought not to need
attention as the booth door will be accessible only to the
person who has the special tamper proof key to get in in case
there needs to be glass replacement.
• The glass panels are two ply laminated safety glass with UV
protection to help prevent the painted objects inside from
fading. Extra glass sections will be in storage in case there is
damage to any of the glass plates.

PLAZA MAINTENANCE PLAN


LOCATION PLAN
LEGEND

1 CUYAHOGA COUNTY COURTHOUSE

2 CITY HALL

3 CLEVELAND CONVENTION CENTER

4 CLEVELAND MALL

5 CLEVELAND PUBLIC SQUARE

SITE LOCATION
SITE CONTEXT - AERIAL
SITE CONTEXT – VIEW FROM PUBLIC SQUARE
SITE CONTEXT
SITE CONTEXT
ONTARIO ST.
ST. CLAIR AVE

PREVIOUS SUBMISSION SITE PLAN


ONTARIO ST.

ST. CLAIR AVE

PREVIOUS SUBMISSION SITE PLAN


CONCEPTUAL SITE PLAN
PLANTING AND SITE FURNISHINGS
Luxescape Cantilever Mount

Lumiere Boca 696

Cooper Monaco 3002A Outdoor Angled Display Signage – Text and Graphic TBD

SITE LIGHTING AND SITE SIGNAGE


ONTARIO
ST. CLAIR AVE

PLAZA DRAWINGS
18’ – 3”
SUPERMAN STATUE
MATERIALS:
BASE:
GRAFITI RESISTANT,
EPOXY PAINTED
SUPERMAN W/ CAPE.
SHERWIN WILLIAMS
APPROX. 730 LBS. 6789 BLUE MOSQUE

STATUE:
STAINLESS STEEL

18’ – 3” FROM
TOP OF PAVING
TO TIP OF CAPE
TOTAL WEIGHT OF
STEEL SUPPORT
APPROX. 3000 LBS.

TOTAL WEIGHT OF STATUE AND 9’ – 2”


STEEL SUPPORT APPROX. 3730 LBS.

SUPERMAN STATUE - DIMENSIONS


SUPERMAN STATUE BASE
6’ – 3”

6’ – 0”
1’ – 8”
SIEGEL AND SHUSTER STATUE
1’ - 8”

CONCRETE BASE
7’-11’ X 3’-6”

MATERIALS:
BASE:
POLISHED BLACK
GRANITE

STATUES:
BRONZE

SIEGEL AND SHUSTER STATUE


8’ - 6”
2”
PHONE BOOTH
6”

2” 3’ - 6”

8’ - 0”
MATERIALS:
BASE:
CONCRETE BASE

STATUE:
STAINLESS STEEL W/ COLORED
FIBERGLASS CLOTHING
PHONEBOOTH GLAZING TO BE 2 PLY
3’ - 2” LAMINATED SAFETY GLASS WITH UV
PROTECTION. VENTING INTAKES IN
3’ - 2” BOTTOM OF INSIDE FLOOR PANEL, WITH
INSECT SCREENING. DOOR WILL
LOCKED.

PHONE BOOTH
QUESTIONS OR COMMENTS?

You might also like