Professional Documents
Culture Documents
Melting Points of Metals - OnlineMetals - Com®
Melting Points of Metals - OnlineMetals - Com®
Melting Point
Date Published: 3/21/22 | Last Updated: 3/07/23
One of our most commonly asked questions is about the melting point of metals. Depending on the
project or end-use, the melting point can have a huge impact on your result. If you’re trying to melt
metal or expose the metal to high heat, you’ll want to be aware of the melting point for the specific
material you are using.
The melting point of iron alloys and the melting point of steel, occur at higher temperatures,
around 2,200-2,500 Fahrenheit (°F) / 1,205-1,370 Celsius (°C). Melting points of Copper Alloys
(including bronzes, pure copper, and brass) are lower than iron, at ranges around 1,675-1,981°F /
913-1,082°C. Aluminum Alloys have a lower temperature range than copper alloys. Pure
aluminum melts at about 1,218 °F / 659 °C, but alloying with other elements can raise this.
Support
Check out our quick answers on the highest and lowest melting points of metals, a video guide,
and a table including more common metals found in our catalog, as well as an extensive table of
all metals and their melting points.
But, the melting point of metals is more complicated than you’d imagine. There isn’t a set
temperature where metal melts. Rather, there is a range going from Solidus to Liquidus. You
might guess from the names, this is the range from when metal is solid (Solidus) to liquid
(Liquidus).
To help answer that question and explain more, check out our new video below. (Video
measured in °F)