Professional Documents
Culture Documents
Manual Tong
Manual Tong
Manual Tong
Manual Tongs
USER’S MANUAL
ORIGINAL INSTRUCTIONS
REFERENCE REFERENCE DESCRIPTION
HT Tong Manual Tongs
This document contains proprietary and confidential VarcoBJ BV
information which is the property of National Oilwell Nijverheidsweg 45
Varco, L.p, its affiliates or subsidiaries (all collectively referred
to hereinafter as "NOV"). It is loaned for limited purposes
4879 AP Etten-Leur
only and remains the property of NOV. Reproduction, in P.O. Box 17
whole or in part, or use of this design or distribution of this 4870 AA Etten-Leur
information to others is not permitted without the express The Netherlands
written consent of NOV. This document is to be returned to
NOV upon request or upon completion of the use for which Tel + 31-76-5083000
it was loaned. This document and the information contained Fax + 31-76-5046000
and represented herein is the copyrighted property of NOV. www.nov.com
DOCUMENT NUMBER REV
50006190-MAN-001 D
September 2013
www.nov.com
User’s Manual
HT-Tongs
Manual Tongs
50006190-MAN-001 D
Sept. 2013
www.nov.com
Document number 50006190-MAN-001
Revision D
Page 2 of 66
Revision History
Change Description
© Copyright 2013 NOV, NOV LP. All rights reserved. Patent Pending.
NOV®, Varco® is a registered trademark of NOV, Varco I/P reg. U.S. Patent & Trademark Office. This
publication is the property of, and contains information proprietary to NOV, Varco International, Inc. No part of
this publication may be reproduced or copied in any form, or by any means, including electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of NOV, Varco IP®.
All product, brand, or trade names used in this publication are the trademarks or registered trademarks of their
respective owners. Information in this manual is subject to change without notice.
www.nov.com
Document number 50006190-MAN-001
Revision D
Page 3 of 66
Table of Contents
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Special information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Notes, Cautions, and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Note: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Caution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warning: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
General System Safety Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Personnel Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Recommended Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Replacing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Proper Use of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Identification numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warning plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HT-Tong restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Part numbers, ratings & weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Lubrication and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Recommended inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Recommended grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Daily Inspection (when tool is in use) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6 Monthly Inspection (when tool is in use) . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Annual (1 year) Inspection (when tool is in use) . . . . . . . . . . . . . . . . . . . . . . . 19
Magnetic Particle Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Evaluations of indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Qualifications and certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table 1: Acceptance criteria for API 7k equipment . . . . . . . . . . . . . . . . . . . . . 20
Table 2: Acceptance criteria for welds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 3: Acceptance Criteria for wrought material . . . . . . . . . . . . . . . . . . . . . 21
Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Maximum allowable wear to maintain 100% torque rating . . . . . . . . . . . . . . . 22
www.nov.com
Document number 50006190-MAN-001
Revision D
Page 4 of 66
Table of Contents
Shop repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing dies/inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installation & commissioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
General procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Safety information befor use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Snub line saver pn 50006017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Applying make up torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Direction of pulling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Height of the tool joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Assembly & dis-assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Disassembly of the hanger and lever assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing dies/inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Lug jaw removal for changing sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Lug jaw HT200 nut removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Overview possible problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Appendixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Risk assessment acc. to EN12100:2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Conclusion Risk Assessment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
General conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Applicable standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Reception, storage, transport & decommissioning . . . . . . . . . . . . . . . . . . . . . . . . 35
Immediatelly after reception* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Inspection and test during storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Storage general recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Storage after use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Decommissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Torque values (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Torque values (metric) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Parts lists and exploded views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Additional parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Parts list HT 14 manual tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Exploded view HT14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Parts list HT 35 manual tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Exploded view HT35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Parts list HT 55 manual tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Exploded view HT55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Part list HT 65 manual tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Exploded view HT65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Parts list HT100 manual tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
www.nov.com
Document number 50006190-MAN-001
Revision D
Page 5 of 66
Table of Contents
Exploded view HT100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Parts list HT200 manual tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Exploded view HT200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Air lift assembly HT200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Special dressing of HT200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Casing head assemblies overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Parts list HT 50 casing head assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Snub line saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Critical area drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
www.nov.com
Document number 50006190-MAN-001
Revision D
Page 6 of 66
Table of Contents
www.nov.com
Document number 50006190-MAN-001
1: General Information
Revision D
Page 7 of 66
General information
Instructions
Original Instructions are published in English; in the event the end-user may wish to obtain a
translation of these in the official language of the country in which the machinery is to be
used please contact your local NOV representative. Please note that this service may not be
free of charge. Original Instruction can be downloaded from www.NOV.com/drilling
Pvodní návod je zveejn!n v angli"tin!; pokud si koncový uivatel peje získat peklad
návodu v úedním jazyce zem!, ve které se zaízení bude pouívat, me se obrátit na
místního zástupce spole"nosti NOV. Upozor$ujeme, e tato sluba nemusí být zdarma.
Pvodní návod je k dispozici ke staení na adrese www.NOV.com/drilling
Juhendi originaal on avaldatud inglise keeles. Kui lõppkasutaja soovib tõlget selle riigi
ametlikus keeles, kus seadmeid kasutatakse, palume pöörduda NOV-i kohaliku esindaja
poole. Palume silmas pidada, et see teenus ei pruugi olla tasuta. Juhendi originaali saab alla
laadida veebisaidilt www.NOV.com/drilling.
Instrukcij% originalas yra skelbiamas angl% kalba. Jei galutinis vartotojas nor&t% gauti i%
instrukcij% vertim( ) alies, kurioje )rengimai turi b*ti naudojami, oficiali(j( kalb(, reik&t%
kreiptis ) vietin) NOV atstov(. Praome atkreipti d&mes), kad i paslauga gali b*ti mokama.
Instrukcij% original( galima parsisi%sdinti i tinklalapio www.NOV.com/drilling
Oryginalne instrukcje zosta9y wydane w j<zyku angielskim. Aby uzyska= t9umaczenie tych
instrukcji na j<zyk kraju, w którym urz(dzenie ma by= u>ywane, nale>y skontaktowa= si<
z lokalnym przedstawicielem firmy NOV. Nale>y pami<ta=, >e taka us9uga jest p9atna.
Oryginaln( instrukcj< mo>na pobra= na stronie www.NOV.com/drilling
As Instruções Originais são publicadas em inglês; se o utilizador final pretender obter uma
tradução destas instruções no idioma oficial do país onde a maquinaria vai ser utilizada,
deverá contactar o representante local da NOV. Chamamos a atenção para o facto de este
serviço poder não ser gratuito. As Instruções Originais podem ser transferidas a partir do site
www.NOV.com/drilling
www.nov.com
Document number 50006190-MAN-001
Revision D 1: General Information
Page 8 of 66
Pôvodný návod je vydaný v anglickom jazyku. Ak si koncový pouívateD elá získaF preklad
v úradnom jazyku tátu, v ktorom sa stroj bude pouívaF, obráFte sa na miestneho zástupcu
spolo"nosti NOV. Upozor$ujeme, e táto sluba nemusí byF bezplatná. Originálny návod je k
dispozícii na prevzatie zo stránky www.NOV.com/drilling.
Originalna navodila so objavljena v angle"ini; "e kon"ni uporabnik eli prevod teh navodil v
uradnem jeziku drave, kjer se bodo stroji uporabljali, se obrnite na lokalnega predstavnika
podjetja NOV. Ta storitev mogo"e ne bo brezpla"na. Originalna navodila lahko prenesete s
spletne strani www.NOV.com/drilling
Las instrucciones originales son publicadas en inglés. En el caso de que el usuario final quiera
obtener una traducción en el idioma oficial del país donde la maquinaria será utilizada, debe
ponerse en contacto con su representante local de NOV. Tenga en cuenta que este servicio
puede conllevar gastos. Es posible descargar las instrucciones originales desde
www.NOV.com/drilling.
Alkuperäiset ohjeet on julkaistu englannin kielellä; mikäli loppukäyttäjä haluaa saada niiden
käännöksen sen maan virallisella kielellä, jossa konetta käytetään, on otettava yhteys
paikalliseen NOV-edustajaan. On mahdollista, että tästä palvelusta peritään maksu.
Alkuperäiset ohjeet voi ladata osoitteesta www.NOV.com/drilling
Les consignes originales sont publiées en anglais; dans le cas où lutilisateur final demande
une traduction de ces consignes vers la langue officielle du pays dans lequel la machine doit
être utilisée, veuillez contacter le représentant NOV sur place. Le service de traduction peut
être payant. Les consignes originales peuvent être téléchargées du site
www.NOV.com/drilling.
Foilsítear Treoracha bunúsacha sa Bhéarla; i gcás ar mian leis an úsáideoir aistriúchán a fháil i
dteanga oifigiúil na tíre ina bhfuil an t-innealra le húsáid déan teagmháil le d'ionadaí áitiúil
NOV le do thoil. Bíodh a fhios agat gur féidir nach bhfuil an tseirbhís sin saor in aisce. Is
féidir Treoir Bhunúsach a íoslódáil ag www.NOV.com/drilling
www.nov.com
Document number 50006190-MAN-001
1: General Information
Revision D
Page 9 of 66
Le Istruzioni originali sono pubblicati in lingua inglese, nel caso in cui l'utente finale intenda
ottenere una traduzione di queste istruzioni nella lingua ufficiale del paese in cui la macchina
deve essere usata si prega di contattare il rappresentante locale della NOV. Facciamo inoltre
rilevare che questo servizio può non essere a titolo gratuito. Le Istruzioni originali possono
essere scaricate dal sito: www.NOV.com/drilling
Istruzzjonijiet oriinali bl-Ingli>; jekk l-uttent aari jixtieq jakwista traduzzjoni ta dawn fil-
lingwa uffijali tal-pajji> fejn il-makkinarju gandu jintu>a kkuntattja r-rappre>entant lokali
tan-NOV. Innota li dan is-servizz huwa bxejn. L-istruzzjoni oriinali jista jitni>>el minn
www.NOV.com/drilling
Special information
Detailed descriptions of standard workshop procedures, safety principles and service operations
are not included. Please note that this manual may contain warnings about procedures which
could damage equipment, make it unsafe or cause PERSONAL INJURY. Please understand that
these warnings cannot cover all conceivable ways in which service (whether or not
recommended by NOV) might be done or the possible hazardous consequences of each
conceivable ways. Anyone using service procedures or tools, whether or not recommended by
NOV, must be thoroughly satisfied that neither personal safety nor equipment safety will be
jeopardized.
All information contained in this manual is based upon the latest product information available at
any time of printing. We reserve the right to make changes at any time without notice.
Intended audience
This manual is intended for use by field engineering, installation, operation, and repair
personnel. Every effort has been made to ensure the accuracy of the information contained
herein. NOV® 2013, NOV, Varco LP, will not be held liable for errors in this material or for
consequences arising from misuse of this material.
www.nov.com
Document number 50006190-MAN-001
Revision D 1: General Information
Page 10 of 66
Conventions
Notes, Cautions, and Warnings
Notes, cautions, and warnings provide readers with additional information and to advise the
reader to take specific action to protect personnel from potential injury or lethal conditions. They
may also inform the reader of actions necessary to prevent equipment damage. Please pay
close attention to these advisories.
Note:
The note symbol indicates that additional information is
provided about the current topics.
Caution:
The caution symbol indicates that potential damage to
equipment or injury to personnel exists. Follow instructions
explicitly. Extreme care should be taken when performing
operations or procedures preceded by this caution symbol.
Warning:
The warning symbol indicates a definite risk of
equipment damage or danger to personnel. Failure
to observe and follow proper procedures could
result in serious or fatal injury to personnel,
significant property loss or significant equipment
damage.
Illustrations
Illustrations (figures) provide a graphical representation of equipment components or screen
snapshots for use in identifying parts or establishing nomenclature and may or may not be drawn
to scale.
For component information specific to your rig configuration see the technical drawings included
with your NOV documentation.
Safety Requirements
NOV equipment is installed and operated in a controlled drilling rig environment involving
hazardous situations. Proper maintenance is important for safe and reliable operation.
Procedures outlined in NOV manuals are the recommended methods of performing operations
and maintenance.
www.nov.com
Document number 50006190-MAN-001
1: General Information
Revision D
Page 11 of 66
CAUTION: Read and follow the guidelines below before installing equipment or
performing maintenance to avoid endangering exposed persons or damaging
equipment.
Contact the NOV training department for more information about equipment operation and
maintenance training.
Recommended Tools
Service operations may require the use of tools designed specifically for the purpose described.
NOV recommends that only those tools specified be used when stated. Ensure that personnel
and equipment safety are not jeopardized when following service procedures or using tools not
specifically recommended by NOV.
Replacing Components
Verify that all components (such as cables, hoses, etc.) are tagged and labeled during
assembly and disassembly of equipment to ensure correct installation.
Replace failed or damaged components with NOV certified parts. Failure to do so could
result in equipment damage or injury to personnel.
Routine Maintenance
Equipment must be maintained on a routine basis. See this manual for maintenance
recommendations.
Identification numbers
You will find the serial number of the tool stamped into the lever.
www.nov.com
Document number 50006190-MAN-001
Revision D 1: General Information
Page 12 of 66
Warning plates
WARNING: Warning plates must be present on the HT-Tong. Do not remove
the labels. When a label or warning plate has disappeared, it must be
replaced.
WARNING
Dies and inserts could be hazardous if improperly handled, installed or removed.
Such misuse could cause serious injury to personnel. Wear eye protection at all
times when installing or removing. Wear gloves when handling.
CAUTION: Manual tongs are critically loaded tools when used to torque tubular goods.
Line pull on lever should be at 90 degrees (a right angle) to axis of lever. The full length of
the tong die must be engaged with tool joint when making up or breaking out connections.
Running tong dies on irregular surfaces of tool joints, such as hard banding, must be
avoided. Torque on tongs should not exceed manufacturer’s rating at any time.
WARNING: Only Varco BJ parts should be used. Manual tongs are cast alloy heat
treated steel and should not be welded in the field. Improper welding can cause cracks and
brittleness in heat affected areas which can result in drastic weakening of the part and
possible failure. Repairs involving welding and/or machining should be performed only by
an authorized Varco BJ repair facility. Using a manual tong that has been improperly welded
or repaired can cause failure which may result in serious bodily injury or property damage.
PN 26119-5 Rev -
www.nov.com
Document number 50006190-MAN-001
1: General Information
Revision D
Page 13 of 66
PN 30808 Rev F
Year of the adjustable stop should be
manufacture: tripped out of engagement with
Manufactured/assembled by National Oilwell Varco the latch jaw stop. This is very
PN A-200568 Rev C
Expo Partes, Circulio De La Amistad No. 138 important for ease of latching.
Mexicali, BC21210, Mexico Year of
manufacture:
Manufactured/assembled by National Oilwell Varco
Expo Partes, Circulio De La Amistad No. 138
Mexicali, BC21210, Mexico
manufacture:
Year of manufacture:
www.nov.com
Document number 50006190-MAN-001
Revision D 1: General Information
Page 14 of 66
Lifting
The lifting procedures should carefully be observed and carried out according to the manual.
HT-Tong restrictions
The HT-Tong is designed to be used as a tong for making up and breaking out tubular
connections and must not be used for any other purpose.
Limited warranty
The warranty will be void if the HT-Tong or parts were either:
unauthorized modified, repaired or serviced
replacement parts not manufactured by NOV were utilized
not properly stored or maintained
CE marking
www.nov.com
Document number 50006190-MAN-001
2: Specifications
Revision D
Page 15 of 66
Specifications
General description
The HT-Tong is a tool designed for making up and breaking connections of tubular goods, from
light tubing to heavy wall pipe and drill collars. There are 7 types, varying in torque capacity from
10,000 to 200,000 lbs / ft (13,560 - 271,000Nm). Covered sizes from 2.3/8" to 17 ", or 36" (HT50
with extended reach).
Interchangeable lug jaw design permits each tong to handle different sizes of tubular. By
installing hinge jaws (available for some models), bigger tubular sizes can be handled.
The tongs can be assembled for either making-up or break-out by removing the hanger and
turning the complete HT Tong over.
HT35 2 3/ -103/ 60.3 - 273.1 Long lever 47 1/ 1196 4 5/ 1133 57 1/ 1450 54 5/ 1387 18 457
8 4 8 8 8 8
Short lever 36 3/16 919 33 11/16 885 46 11/16 1173 43 11/16 1109 18 457
HT55 1 3 88.9 - 339.7 Long lever 3 1401 1 1322 7 1687 9 1512 1 590
3 /2 -13 /8 55 /16 52 /16 66 /16 59 /16 23 /4
Short lever 49 3/16 1249 46 1/16 1169 60 7/16 1535 53 9/16 1360 23 1/4 590
HT200 6-16 203.2 - 406 Standard 62 3/ 1584 57 11/ 1465 78 1981 68 1727 38 965
8 16
Casing head assembly only
HT50 13 3/8 - 36 339.7 - 914.4 Lever to be used with HT55 tong and hanger
www.nov.com
Document number 50006190-MAN-001
Revision D 2: Specifications
Page 16 of 66
HT55 200085-1 6 5/8 - 9" 55,000 HT14 200645-1 2 3/8- 3½" 10,000
HT50 200580-1 13 3/8- 14½" 50,000 Appr. Weights (1 tong ass’y only)
Casing head assemblies only
HT50 200580-2 14½ - 16" 50,000 HT14 125 to 145 lbs (57 to 66 kg)
HT50 200580-3 16 - 17½" 50,000 HT35 285 to 330 lbs (130 to150 kg)
HT50 200580-4 17½ - 19" 50,000 HT55 425 to 465 lbs (192 to 210 kg)
HT50 200580-5 19 - 20" 50,000 HT65 500 to 590 lbs (226 to 267 kg)
HT50 200580-6 20 - 21½" 50,000 HT100 665 to 760 lbs (300 to 335 kg)
HT50 200580-7 21½ - 23" 50,000 HT200 1140 to 1200 lbs (517 to 545 kg)
* = 200507-1 is also for size range 13” - 14.3/4” with hinge jaw (pn 200505-1)
** = 200508-1 is also for size range 14.3/4” - 16” with hinge jaw (pn 200505-1)
*** = 200080-2 + 200081-2 is hinge + lug jaw assembly
**** = Hinge jaw ass’y
www.nov.com
Document number 50006190-MAN-001
3: Lubrication and maintenance
Revision D
Page 17 of 66
Recommended inspections
NOTE: The owner and user together with the manufacturer should jointly develop
and update inspection, maintenance, repair and remanufacture procedures
consistent with equipment application, loading, work environment, usage and
operational conditions.
These factors may change as a result of new technology, product improvements or
fundamental changes in service conditions.
Alternatively, NOV recommends using the Periodic inspection and maintenance
Categories and Frequencies as mentioned in API RP8B Table 1. Long-term planning
shall be adjusted in order not to interfere unnecessarily with the running operations.
Safety
WARNING: Only original NOV parts must be used. HT-tongs are produced from
cast alloy heat treated steel and must not be welded in the field. Improper
welding can cause cracks and brittleness in heat-affected areas which can
result in dramatic weakening of the part and possible failure. Repairs involving
welding and/or machining should be performed only by an NOV authorized
repair facility. Using a HT-tongs that has been improperly welded or repaired is
dangerous.
Recommended grease
Use extreme pressure, lithium based, multi purpose grease classification according to ISO
6743-9:2003 Lubricants, industrial oil and related products (class L) - Classification - Part 9:
Family X (greases) or equivalent.
Minimum requirements:
www.nov.com
Document number 50006190-MAN-001
Revision D 3: Lubrication and maintenance
Page 18 of 66
Inspection
Daily Inspection (when tool is in use)
Category I.
This category involves observing the equipment during operation for indications of inadequate
performance. When in use, equipment shall be visually inspected on a daily basis for cracks, loose fits or
connections, elongation of parts, and other signs of wear, corrosion or overloading. Any equipment found to
show cracks, excessive wear, etc., shall be removed from service for further examination. The equipment
shall be visually inspected by a person knowledgeable in that equipment and its function.
Category II.
This is Category I inspection plus further inspection for corrosion, deformation, loose or missing
components, deterioration, proper lubrication, visible external cracks, and adjustment.
Procedure
Procedure
www.nov.com
Document number 50006190-MAN-001
3: Lubrication and maintenance
Revision D
Page 19 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 3: Lubrication and maintenance
Page 20 of 66
Evaluations of indications
NOTE: If any relevant indications are found, contact NOV to determine the next course of
action. Preferably an inspection report (with photograph or sketch) detailing the serial
number of the equipment and the type, length and location of the indication should be
presented. NOV will be able to advise the proper and most efficient repair.
Linear indication: An indication, revealed by NDE, having a length at least three
times its width
Rounded indication: An indication, revealed by NDE, with a circular or elliptical
shape and having a length less than three times its width.
Qualifications and certification
All personnel performing and interpreting MPI shall be qualified in accordance with the
guidelines of ASNT SNT-TC-1A (latest edition) or an equivalent standard and shall be trained in
the use of the reference photographs and the interpretation of the MPI with regard to the
acceptance criteria and ASTM E125 reference photographs.
Examination
HT-tongs should be MPI examined according to the maintenance procedures. The areas
subject to inspection shall be inspected according to the procedures developed by the user or,
alternatively, as per API RP 8B.
www.nov.com
Document number 50006190-MAN-001
3: Lubrication and maintenance
Revision D
Page 21 of 66
Tests
The HT tongs are torque tested after manufacture or repair to 1.5 times their torque rating.
WARNING: Only original NOV-OEM parts must be used. Manual tongs are
produced from cast alloy heat treated steel and must not be welded in the
field. Improper welding can cause cracks and brittleness in heat-affected
areas which can result in dramatic weakening of the part and possible
failure. Repairs involving welding and/or machining should be performed
only by an NOV authorized repair facility. Using a HT tong that has been
improperly welded or repaired is dangerous.
www.nov.com
Document number 50006190-MAN-001
Revision D 3: Lubrication and maintenance
Page 22 of 66
A
A
A
Shop repairs
Changing dies/inserts
Procedure
1. Remove the cotter pin and take out the retaining pin
2. After replacing the inserts, the retaining pins with the cotter pins shall be reinstalled.
www.nov.com
Document number 50006190-MAN-001
4: Installation & Commissioning
Revision D
Page 23 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 4: Installation & Commissioning
Page 24 of 66
www.nov.com
Document number 50006190-MAN-001
5: Operation
Revision D
Page 25 of 66
Operation
WARNING: Keep hands away from any pinch point or undesignated areas;
use the green handles provided for operating the HT tongs. They are
colored green within the yellow protective hand grips.
Operation Procedure
With the HT Tong positioned and balanced properly, follow the steps outlined below;
1. Ensure that the correct rated tongs with the correct heads are used for the required tubular
torque.
2. Never torque tubular or collars with insufficiently rated tongs.
3. Ensure tong head pin is in the correct hole to assure correct latch position for required
torque.
4. Line from cathead and tong should form a 90° angle when connections are being torqued.
5. It is advised to attache a torque-measuring device to the snub line when using multiple
lines.
6. Counterweight bucket should be balanced for easy up and down motion.
7. Never hang additional weight outside of tong counterweight bucket. When circumstances
require additional weight to be added to tongs, do not tie weight to tong hanger assembly.
8. Before attempting to put tongs on tubular, the tubular should always be stopped and set in
the slips.
9. Tongs should be placed in the correct position on the tool joints and not on the hard band
or tube.
10. When placing tongs on the tool joint, do not get any part of arm or hand in between the
tong and the tool joint.
www.nov.com
Document number 50006190-MAN-001
Revision D 5: Operation
Page 26 of 66
11. Back up tongs (stationary) should be put on first using handles on tongs only.
12. The man working the bottom tongs should always take care that his hands and fingers are
not on the top of the tong handles.
13. Top tongs should then be put on using handles only.
14. Keep your thumb off of the top of the tong handles.
15. When making the tongs bite on the tool joint, hands should be placed in tong handles only.
16. Never stand directly in the path of the rotating tongs during make up or breakout
procedures.
17. All personnel should clear the rotary area during make-up and breakout of high torque
connections such as drill collars or over torqued connections.
18. After breaking or making connection, bottom tongs should be pushed at tong lever arm to
break open and unlatch same.
19. When unlatching tongs, unlatch the bottom tong first to avoid contact with the above tong
hanger arm. Always be vigilant with hand placement.
20. Always be aware of snub lines.
21. Keep out of the Driller’s line of sight to the rotary table at all times while making and
breaking connections.
22. Do not stand on tongs when working above rig floor.
23. Tongs should be tied back out of the way when not in use.
www.nov.com
Document number 50006190-MAN-001
5: Operation
Revision D
Page 27 of 66
7 3/4” DC with 6 5/8” reg. connection has a recommended make-up torque of 58,500 Ft Lbs
(79,315 Nm). The HT tong capable of supplying this torque is the HT 65 tong. The length of the
tong arm is appr. 4.25 Ft (1.29 m). The force to be applied on the pull line will be:
F = make-up torque / arm lenght = 58,500 / 4.25 = appr. 13,765 Lbs. (79,315 / 1.29 = 61,485 N
= appr. 6,000 kg)
Force
Lt
www.nov.com
Document number 50006190-MAN-001
Revision D 5: Operation
Page 28 of 66
Direction of pulling
NOTE: In below figure the tongs are NOT the back up tongs, but the ones
being used for MU/BO. Below images show TOPVIEWS
HT35
HT55
Break Out Make Up
HT14
HT55
HT100
HT200
Break Out Make Up
www.nov.com
Document number 50006190-MAN-001
5: Operation
Revision D
Page 29 of 66
Although not recommended, if only one tong is used with a locked rotary table, height of the tool
joint should not exceed that shown in Case I.
Also line pull should not exceed recommended makeup torque with tongs at 90 degrees to the
jerk line.
Height above the rotary table can be calculated by means of the following:
In the formula in the figure below:
Hmax = Height of tool joint above slips (ft).
Ym = Minimum tensile yield of tubular (psi)
Grade D = 55,000
Grade E = 75,000
Grade X = 95,000
Grade G =105,000
Grade S =135,000
Lt= Tong arm length (ft, measured on rig)
F = Line pull (lbs)
T = FxL (torque ft-lbs)
l/C = Section Modulus of tubular, inch3, Table B4-1.
Sample calculation:
4.1/2 in, 16.60 lb/ft. Grade E drill tubular, with 4.1/2” in. E.H = 6 in. OD = 3.1/4” ID tool joints.
www.nov.com
Document number 50006190-MAN-001
Revision D 5: Operation
Page 30 of 66
1 2 3
Tubular O.D. Tubular Weight Nominal I/C (cu. inch)
(inch) (lbs/ft)
4.85 0.66
2-3/8
6.65 0.87
6.85 1.12
2-7/8
10.40 1.60
9.50 1.96
3-1/2 13.30 2.57
15.50 2.92
11.85 2.70
4 14.00 3.22
15.70 3.58
13.75 3.59
16.60 4.27
20.00 5.17
4-1/2
22.82 5.68
24.66 6.03
25.50 6.19
16.25 4.86
5 19.50 5.71
25.60 7.25
19.20 6.11
5-1/2 21.90 7.03
24.70 7.84
6-5/8 25.20 9.79
F F
F
Figure B4-9. The sketches and formula’s show how to figure height of tool joint above slips.
www.nov.com
Document number 50006190-MAN-001
6: Assembly & dis-assembly
Revision D
Page 31 of 66
CAUTION: Ensure that the orientation of the parts is correct while assembling the
HT-tong. For proper order of installation of parts, see exploded views in chapter
“Drawings”.
Watch orientation of
lugs and jaws.
www.nov.com
Document number 50006190-MAN-001
Revision D 6: Assembly & dis-assembly
Page 32 of 66
Changing components
Changing dies/inserts
Procedure
1. Remove the cotter pins followed by the retaining pins
CAUTION: Wear eye protection when removing or replacing inserts to protect against
chip fragments
2. After replacing the inserts, the retaining pins with the cotter pins shall be reinstalled. Use
always NEW cotter pins.
Lug jaw removal for changing sizes
Procedure
1. HT200: Remove the hinge pin by removing the cotter pin from the clevis pin, remove the
clevis pin, unscrew and remove the hinge pin.
2. Other then HT200: Remove the cotter pin from the nut, unscrew the nut and remove the
hinge pin.
3. Take out the lug jaw and replace by correct sized lug jaw and possible other components
needed for the job
4. Relock the pin. Use NEW cotter pins.
Lug jaw HT200 nut removal
Procedure
1. Remove the hinge pin by removing the cotter pin from the clevis pin, remove the clevis pin,
unscrew and remove the hinge pin.
2. Drive the groove pins from inside out (HT tong upside down)
3. Take out the nut.
www.nov.com
Document number 50006190-MAN-001
7: Trouble shooting
Revision D
Page 33 of 66
Trouble shooting
When problems cannot be solved, contact an authorized NOV repair facility
Tong does not hang level Balancing (eye) bolt not adjusted properly Adjust balancing (eye) bolt
www.nov.com
Document number 50006190-MAN-001
Revision D 7: Trouble shooting
Page 34 of 66
www.nov.com
Document number 50006190-MAN-001
8: Appendixes
Revision D
Page 35 of 66
Appendixes
Risk assessment acc. to EN12100:2010
Conclusion Risk Assessment
General conclusions
Ensure training is carried out
Have knowledge of rig procedures.
Carry out inspection according to manual
Work according to procedures in manual
Ensure snub-line saver is in place with safety line
Personnel must stay out of working area of tong
Wear personal safety protection like safety glasses, hard hat etc.
Applicable standards
EN-ISO 12100:2010 Safety of machinery - Basic concepts, general principles for design -
Risk assessment and risk reduction
Machinery Directive: 2006/42/EC
API 7K
Reception, storage, transport &
decommissioning
NOTE: All exposed, not painted metal surfaces, are coated with a rust preventative at
the factory prior to shipment for transport only.
www.nov.com
Document number 50006190-MAN-001
Revision D 8: Appendixes
Page 36 of 66
The best way of transporting the tool is in its original crate. Use oiled paper and seal the box with
plastic to prevent leaking when stored outside. Secure the top safely.
Decommissioning
The tool may contain grease, steel, rubbers, plastic, stainless steel, mild steel and several
assembled components with undefined consistency or mixtures. The tool can be contaminated
with drilling fluids, hydraulic fluids and preservatives. After the tool is decommissioned, it is
recommended to disassemble the tool in a place where waste fluids can be contained and
properly disposed of.
WARNING: Any fluids, mud and grease are potentially unsafe when in contact
with the skin. Always wear gloves and safety goggles when disassembling the
tool.
3. Accumulator (if applicable): let all the pressure out and remove the valve. Decontaminate if
necessary.
4. Remove the parts.
5. Carry off to proper place for final storage or destruction.
www.nov.com
Document number 50006190-MAN-001
8: Appendixes
Revision D
Page 37 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 8: Appendixes
Page 38 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 39 of 66
Drawings
Parts lists and exploded views
NOTE: In the exploded views on the following pages, several parts,
especially the jaw assemblies, are not shown. In this chapter you will find
these parts.
Below “additional parts” are not mentioned in the exploded views,
Additional parts
TOPVIEW
Handle bolt
Flat washer
Plastic safety cap
Grip hose
Plastic safety cap
BOTTOM VIEW
Flat washer
Self locking nut
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 40 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 41 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 42 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 43 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 44 of 66
10 1 Hanger (note 1) 1 1
Range 3 /2"-5 /4"
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 45 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 46 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 47 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 48 of 66
29 1 Bolt 50012-52-C8
30 1 Nut 50212-C
31 1 Lock washer 50912-C
1 Latch ass’y 200544-1
32 1 Latch (note 1)
33 1 Latch spring plunger 24526 For part numbers grip points, see page 9-32
34 1 Plunger pin 24530 Note 1: Available as ass’y only
35 1 Grease fitting 53201 Note 2: Also available in lenght of 48” and 96”
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 49 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 50 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 51 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 52 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 53 of 66
See part number 30041-1 for air lift assembly for HT200 tong.
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 54 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 55 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 56 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 57 of 66
Ref. Description No. req. No. req. No. req. No. req. No. req. No. req. No. req. No. req. pn#
1 Lever ass’y
- Die 2 2 2 2 2 2 2 2 16402-6
- Nut 4 4 4 4 4 4 4 4 50510-C
Ref. Description No. req. No. req. No. req. No. req. No. req. No. req. No. req. Part no.
1 Lever ass’y
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 58 of 66
Ref. Description No. req. No. req. No. req. No. req. No. req. No. req. No. req. Part no.
- Die 2 2 2 2 2 2 2 16402-6
- Nut 4 4 4 4 4 4 4 50510-C
Range Casing head assy pn# Range Casing head assy pn# Range Casing head assy pn#
200600-3
13 3/8” to 14 1/2” 200580-1 20” to 21 1/2” 200580-6 28 1/2” to 30”
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 59 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 60 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 61 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 62 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 63 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 64 of 66
www.nov.com
Document number 50006190-MAN-001
9: Drawings
Revision D
Page 65 of 66
www.nov.com
Document number 50006190-MAN-001
Revision D 9: Drawings
Page 66 of 66
www.nov.com
AUTOL TOP 2000 Page 1 of 4
2. Hazards identification
Classification CLP EUH 210
Description of hazard The product has not been classified according to the legislation in force.
msds for available for professionel users.
3. Composition/information on ingredients
Component name Identification Classification Contents
Zincdialkyldithiophosfate CAS no.: 68649-42-3 Xi, N; R38, R41, R51/53 < 2,5 %
Mineral oil 10 - 30 %
Column headings CAS no. = Chemical Abstracts Service; EU (Einecs or Elincs number) =
European inventory of Existing Commercial Chemical Substances; Ingredient
name = Name as specified in the substance list (substances that are not
included in the substance list must be translated, if possible). Contents given
in; %, %wt/wt, %vol/wt, %vol/vol, mg/m3, ppb, ppm, weight%, vol%
HH/HF/HE T+ = Very toxic, T = Toxic, C = Corrosive, Xn = Harmful, Xi = Irritating, E
= Explosive, O = Oxidizing, F+ = Extremly flammable, F = Very flammable,
N = Environmental hazard
Component comments Contains in addition component which are not classified. Mineral oil contains
DMSO<3% and therefor not classified as cancer.
4. First-aid measures
General Remove affected person from source of contamination. Provide rest, warmth
and fresh air.
Inhalation Fresh air and rest. Get medical attention if any discomfort continues.
Skin contact Wash skin with soap and water. Remove contaminated clothes and rinse skin
thoroughly with water. Get medical attention if any discomfort continues.
Clothes must be washed before re-use.
Eye contact Immediately flush with plenty of water for up to 15 minutes. Remove any
AUTOL TOP 2000 Page 2 of 4
contact lenses and open eyes wide apart. Contact physician if irritation
persists.
Ingestion Immediately give a couple of glasses of water or milk, provided the victim is
fully conscious. DO NOT INDUCE VOMITING! Get medical attention.
5. Fire-fighting measures
Suitable extinguishing media Water spray, carbon dioxide, dry powder or polar resistant foam. If possible,
remove containers exposed to heat or cool with water.
Improper extinguishing media Water-jet.
Fire and explosion hazards Not flammable Fire causes formation of toxic gases. Irritating
gases/vapours/fumes of: Carbon dioxide (CO2). Carbon monoxide (CO).
Personal protective equipment Fire brigade must use fresh-air helmet.
2. Composition/information on ingredients
Hydrocarbon solvent, film forming corrosion preventives and additives.
Chemical name CAS no. % EINECS / ELINCS. Classification
Low boiling point hydrogen treated naphtha (white spirit) 64742-82-1 50 - 100 265-185-4 R10
Xn; R65
R66, 67
N; R51/53
Barium long chain alkaryl sulphonate 93028-28-5 1-5 296-719-4 Xn; R20/22
2-(2-Butoxythoxy) ethanol; diethylene glycol-monobutyl ether 112-34-5 1-5 203-961-6 Xi; R36
See Section 16 for the full text of the R Phrases declared above
* Occupational Exposure Limit(s), if available, are listed in Section 8
3. Hazards identification
This preparation is classified as dangerous according to Directive 1999/45/EC as amended and adapted.
Physical/chemical Hazards Flammable.
Human health hazards Harmful: may cause lung damage if swallowed.
Repeated exposure may cause skin dryness or cracking.
Vapours may cause drowsiness and dizziness.
Residual film: Harmful by inhalation and if swallowed.
Environmental hazards Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment.
Effects and symptoms
Eyes May cause eye irritation.
Skin Prolonged or repeated contact can defat the skin and lead to irritation and/or dermatitis.
Inhalation Vapors and aerosol can produce mucous membrane, nose and throat irritation.
Vapours may cause drowsiness and dizziness.
Ingestion Ingestion may cause gastrointestinal irritation and diarrhoea.
Aspiration hazard if swallowed -- harmful or fatal if liquid is aspirated into lungs.
4. First-aid measures
Eye Contact In case of contact, immediately flush eyes with a copious amount of water for at least 15 minutes. Get
medical attention if irritation occurs.
Skin contact Immediately wash exposed skin with soap and water. Remove contaminated clothing and shoes. Wash
clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if irritation develops.
Inhalation If inhaled, remove to fresh air. Get medical attention if symptoms appear.
Ingestion If swallowed, do NOT induce vomiting. Never give anything by mouth to an unconscious person.
Aspiration hazard if swallowed- can enter lungs and cause damage. Obtain medical attention.
Version 1 Date of issue 21 February 2003 Format United Kingdom (UK) Language
Control Measures Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapours
below their respective occupational exposure limits. Local exhaust ventilation is preferred because it
prevents contaminant dispersion into the work area by controlling it at its source.
Hygiene measures Wash hands after handling compounds and before eating, smoking, using lavatory, and at the end of day.
Personal protective equipment
Respiratory system Use with adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment.
Skin and body Avoid contact with skin. Wear clothing and footwear that cannot be penetrated by chemicals or oil.
Hands Wear gloves that cannot be penetrated by chemicals or oil.
Eyes Safety glasses with side shields.
Version 1 Date of issue 21 February 2003 Format United Kingdom (UK) Language
Chronic toxicity
Carcinogenic effects No component of this product at levels greater than 0.1% is identified as a carcinogen by ACGIH, the
International Agency for Research on Cancer (IARC) or the European Commission (EC).
Regulatory UN number Proper shipping name Class Packing group Label Additional Information
Information
Version 1 Date of issue 21 February 2003 Format United Kingdom (UK) Language
Marine pollutant
IMDG Class: Marine
Pollutant. (Pollutant.)
Version 1 Date of issue 21 February 2003 Format United Kingdom (UK) Language
Version 1 Date of issue 21 February 2003 Format United Kingdom (UK) Language
Legacy number New Number Number Description New Number Legacy number Number Description
8150 10383051‐001 Nut, Proprietary;Hex, Link Block;0.750‐10 UNC‐2B;Handling Tools;Matl Scren 10014374‐001 54157 PCB;4 Terminal Controller;L 99 in;W 99 in
Stock;Phosphate;Adjustable Stop Pin
9561 10460597‐001 SHA;Latch Spring / 'C'B'AA'GG' 10014546‐001 54158 PCB Assembly;Term Controller;L 1 in;W 1 in
9568 Contact NOV Contact NOV 10020825‐001 16402‐6 Die;BJ Tong Blue Diamond;Thk 0.5 in;L 5.7 in;W 1.25 in
11138 Contact NOV Contact NOV 10022158‐001 200071 MANUAL TONG;HT100;RANGE 4"Contact NOV 17";LESS LUG JAWS;PSL API 7K
11139 10446140‐001 Stop, Proprietary;Adjustable;Handling Tools;HT55 10022167‐001 200076‐1 Tong Jaw;Lug;2.3/8"Contact NOV 3.668";For HT35;Assembly;PSL API 7K
11144 10446156‐001 Bushing, Proprietary;Plunger, Adjustable Jaw Stop;Handling Tools;HT55;OD 0.875 in;Thk 10022172‐001 200078‐1 Tong Jaw;Lug;3.1/2"Contact NOV 5.1/4";For HT35;Assembly;PSL API 7K
0.938 in
11191 10446194‐001 Bolt, Proprietary;Adjustable Stop;Thread 0.75 in;L 1 in;Handling Tools;HT55 10022179‐001 200079‐1 Tong Jaw;Lug;5.1/4"Contact NOV 7";For HT35;Assembly;PSL API 7K
11192 10446196‐001 Spring;Jaw Stop Plunger;Handling Tools;HT55;Phosphate;Also for type 'B' rotary tong 10022188‐001 200083‐1 Tong Jaw;Lug;3.1/2"Contact NOV 5";For HT55;Assembly;PSL API 7K
11194 Contact NOV Contact NOV 10022189‐001 200084‐1 Tong Jaw;Lug;5"Contact NOV 6.3/4";For HT55;Assembly;PSL API 7K
11195 Contact NOV Contact NOV 10022190‐001 200085‐1 Tong Jaw;Lug;6.5/8"Contact NOV 9";For HT55;Assembly;PSL API 7K
11196 Contact NOV Contact NOV 10022195‐001 200086‐1 Tong Jaw;Lug;9"Contact NOV 10.3/4";For HT55;Assembly;PSL API 7K
11197 Contact NOV Contact NOV 10022196‐001 200087‐1 Tong Jaw;Lug;11.3/4";For HT55;Assembly;PSL API 7K
11199 10446208‐001 Pin, Proprietary;Dowel for HT tongs;Dia 0.312 in;L 3.188 in;Handling Tools 10022202‐001 200089‐1 TONG JAW;LUG;12.3/4"Contact NOV 13";FOR HT55;ASSEMBLY;PSL API 7K
11229 10446275‐001 Spring;BOOSTER PLUNGER;Handling Tools;HT55;Also for type 'B' rotary tong 10022204‐001 200090‐1 Tong Jaw;Lug;13.3/8";For HT55;Assembly;PSL API 7K
11297 Contact NOV Contact NOV 10022861‐001 200505‐1 Tong Jaw;Hinge;11.1/2"Contact NOV 16";For HT200;Assembly;PSL API 7K
11511 Contact NOV Contact NOV 10022862‐001 200506‐1 Latch, Proprietary;Jaw ass'y. 8"X9.5/8";Handling Tools;HT200
11513 Contact NOV Contact NOV 10022864‐001 200508‐1 Tong Jaw;Lug;11"Contact NOV 12.1/2";For HT200;Assembly;PSL API 7K;Also for
14.3/8"Contact NOV 16" If Used With Hinge Jaw
11516 Contact NOV Contact NOV 10022865‐001 200540 Manual Tong;HT65;Range 3.1/2"Contact NOV 17";Less Lug Jaws;PSL API 7K
11765 Contact NOV Contact NOV 10022869‐001 200545‐1 Tong Jaw;Hinge;8"Contact NOV 17";For HT65;Assembly;PSL API 7K
11883 10448273‐001 Kit;General;Filter Regulator;Multiple Product Lines;N/A;NORGREN/B74G‐4AK‐QD3‐RMG 10022870‐001 200546‐1 Tong Jaw;Lug;3.1/2"Contact NOV 8.1/4";For HT65;Assembly;PSL API 7K
11933 10357924‐001 Pin, Proprietary;SSW‐10 Link, Assembly;Dia 0.875 in;L 3.75 in;Multiple Product Lines 10022871‐001 200547‐1 Tong Jaw;Lug;8"Contact NOV 11.1/4";For HT65;Assembly;PSL API 7K
11941 Contact NOV Contact NOV 10022872‐001 200548‐1 Tong Jaw;Lug;11.3/4"Contact NOV 14.3/8";For HT65;Assembly;PSL API 7K
11942 Contact NOV Contact NOV 10022873‐001 200549‐1 Tong Jaw;Lug;16"Contact NOV 17";For HT65;Assembly;PSL API 7K
11943 10357942‐001 Pin, Proprietary;SSW‐10 Link, Assembly;Dia 0.875 in;L 3.75 in;Multiple Product Lines 10022879‐001 200561‐1 MANUAL TONG;HT55;RANGEContact NOV;LONG LEVER; LESS LUG JAWS;PSL API 7K;JS_
CHECK RANGE
12434 Contact NOV Contact NOV 10022889‐001 200600‐3 Tong Head;28.1/2"Contact NOV 30";For HT50;Assembly;PSL API 7K;less Lever and Hanger
12586 10447449‐001 Manifold, Proprietary;Machining;Top Drives;PH‐100;Matl MS00019 10022891‐001 200600‐7 Tong; Assembly, Casing Head 34.500Contact NOV 36.000, HT‐50; ; ; ; ; ; ;
13285 Contact NOV Contact NOV 10022900‐001 200620‐2 MANUAL TONG;HT35;RANGE 2.3/8"Contact NOV 7";LONG LEVER; LESS LUG JAWS;PSL API 7K
13798 Contact NOV Contact NOV 10022941‐001 200645‐1 Tong Jaw;Lug;2.3/8"Contact NOV 3.1/2";For HT14;Assembly;PSL API 7K
13799 Contact NOV Contact NOV 10022946‐001 200646‐1 Tong Jaw;Lug;3.1/2"Contact NOV 5";For HT14;Assembly;PSL API 7K;Latchlug
15468 Contact NOV ELBOW CONNECTOR, 35‐1 1/4"2R 10022950‐001 200647‐1 Tong Jaw;Lug;4.3/4"Contact NOV 6.1/4";For HT14;Assembly;PSL API 7K;Latchlug
18430 10777544‐001 NOR;TEFLON WASHER M50 PTFE 1252986 10022951‐001 200648‐1 Tong Jaw;Lug;5.3/4"Contact NOV 7";For HT14;Assembly;PSL API 7K
23622 Contact NOV Contact NOV 10022956‐001 200662‐1 Tong Jaw;Hinge;8.1/2"Contact NOV 17";For HT100;Assembly;PSL API 7K
23908 Contact NOV Contact NOV 10022962‐001 200663‐1 Tong Jaw;Lug;4"Contact NOV 8.1/2";For HT100;Assembly;PSL API 7K
23909 Contact NOV Contact NOV 10022964‐001 200664 Tong Jaw;Lug;8.1/2"Contact NOV 12";For HT100;Machining;PSL API 7K
23910 Contact NOV Contact NOV 10022981‐001 200665 Tong Jaw;Lug;12"Contact NOV 15";For HT100;Machining;PSL API 7K
23911 Contact NOV Contact NOV 10022991‐001 200666 Tong Jaw;Lug;15.3/4";For HT100;Assembly;PSL API 7K
23912 Contact NOV Contact NOV 10022992‐001 200667 Tong Jaw;Lug;16"Contact NOV 17";For HT100;Assembly;PSL API 7K
23913 Contact NOV Contact NOV 10023990‐001 203344‐36 Support;Hanger Assembly All HT's;Handling Tools;HT14
23914 Contact NOV Contact NOV 10034934‐005 52319 Nameplate;Warning label (warehouse supply);Handling Tools;For Dies & Inserts
23915 10375323‐001 Plunger, Proprietary;Latch Spring,Type HT14/F;Matl Bronze;Handling Tools;HT‐14;L 2.375 in 10035001‐007 53301‐4‐5 Screw, Drive;Round Head U;#4;L 0.313 in;Matl Steel;Plain;US Standard
23918 10375324‐001 Retainer, Proprietary;Tong Line;Handling Tools;HT14;2.3/8"‐6.1/4" also for type LF 10081212‐001 50006016 WLY;Box, Base Style, Versamax Carr
23920 10375325‐001 Spring;Latch;Handling Tools;HT14 10088121‐001 200580‐8 Tong Head;24"Contact NOV 25.1/2";For HT50;Assembly;PSL API 7K;less Lever and Hanger
23922 10375326‐001 Pin, Proprietary;Machining latch spring plunger for F‐TG;Dia 0.375 in;L 1.5 in;Handling 10091584‐001 939099‐556 Screw, Cap Modified;Hex Head;Drilled Shank;0.750‐10 UNC‐2A;Partially Threaded;L 9 in;Matl
Tools;MANUAL TONG PARTS MISC;Matl Stress proof SAE J429 Grade 8
23927 Contact NOV Contact NOV 10111280‐001 200580‐4 Tong Head;17.1/2"Contact NOV 19";For HT50;Assembly;PSL API 7K;less Lever and Hanger
also suitable for 13.3/8"‐16
23930 Contact NOV Contact NOV 10111281‐001 200580‐5 Tong Head;19"Contact NOV 20";For HT50;Assembly;PSL API 7K;Less Lever and Hanger
1 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
23931 Contact NOV Contact NOV 10115238‐001 200500 Manual Tong;HT200;Range 6"Contact NOV 16";Less Lug Jaws;PSL API 7K;with Air Lift
Assembly
23932 Contact NOV Contact NOV 10115239‐001 200507‐1 Tong Jaw;Lug;9"Contact NOV 11.1/8";For HT200;Assembly;PSL API 7K;Or 13"Contact NOV
14.3/4"
23933 Contact NOV Contact NOV 10137417‐001 200572 Nut, Proprietary;Hinge pin;1"‐8 UNC‐1B;Handling Tools;HT55;Matl AISI 4340
23934 Contact NOV Contact NOV 10137571‐001 201350 Nameplate;Warning label;Multiple Product Lines
23935 Contact NOV Contact NOV 10357924‐001 11933 Pin, Proprietary;SSW‐10 Link, Assembly;Dia 0.875 in;L 3.75 in;Multiple Product Lines
23936 Contact NOV Contact NOV 10357942‐001 11943 Pin, Proprietary;SSW‐10 Link, Assembly;Dia 0.875 in;L 3.75 in;Multiple Product Lines
23937 Contact NOV Contact NOV 10359126‐001 200072‐1 TONG JAW;LONG;4"Contact NOV 17";FOR HT100;ASSEMBLY;PSL API 7K
23938 Contact NOV Contact NOV 10359128‐001 200073‐1 Latch, Proprietary;Assembly;Handling Tools;HT100
23939 Contact NOV Contact NOV 10359131‐001 200074‐1 ETN;ASSEMBLY,SHORT JAW,HT‐100 TONG
24249 10375465‐001 Bolt, Proprietary;Tong Line Retainer;Thread 0.75 in;L 7.063 in;Handling Tools;MANUAL TONG 10359137‐001 200077‐1 Tong Jaw;Lug;2.7/8"Contact NOV 4.1/4";For HT35;Assembly;PSL API 7K
PARTS MISC
24525 10375467‐001 Spring;Latch HT65/100;Handling Tools;HT65;Also for HT100 10359144‐001 200080‐1 ETN;LUG JAW 7X8.5/8 HT‐35
24526 10375468‐001 Plunger, Proprietary;Latch Spring F/SDD/DB;Matl 4140 Steel;Multiple Product Lines;24526;L 10359145‐001 200080‐2 TONG JAW;HINGE AND LUG;7"Contact NOV 8.5/8";FOR HT35;ASSEMBLY;PSL API 7K
5.25 in
24528 10375469‐001 Nut, Proprietary;hinge pin, HT65/HT100;1.1/2‐6 NC‐2;Handling Tools;MANUAL TONG PARTS 10359148‐001 200081‐1 ETN;LUG JAW 9.5/8X10.3/4 HT‐35
MISC;Matl AISI 4140 HEX CD;Phosphate
24529 10375470‐001 Retainer, Proprietary;Tong Line, HT65 & HT100;Handling Tools;MANUAL TONG PARTS MISC 10359149‐001 200081‐2 TONG JAW;HINGE AND LUG;9.5/8"Contact NOV 10.3/4";FOR HT35;ASSEMBLY;PSL API 7K
24530 10375471‐001 Pin, Proprietary;BJ Plunger, For SDD/DB Tong;Dia 0.625 in;L 2.625 in;Multiple Product 10359156‐001 200088‐1 Tong Jaw;Lug;12";For HT55;Assembly;PSL API 7K
Lines;Matl 1045 Steel
24592 Contact NOV Contact NOV 10359185‐001 200204 Pin, Proprietary;Machining Hinge;Dia 1.994 in;L 6.125 in;Handling Tools;HT100;Matl
BMS02CL‐200;Hinge pin
25010 Contact NOV Contact NOV 10359282‐001 200503‐1 ETN;SHORT JAW ASSY.HT‐2
25011 Contact NOV Contact NOV 10359283‐001 200504‐1 Latch, Proprietary;Assembly;Handling Tools;HT200
25012 Contact NOV Contact NOV 10359287‐001 200506‐SP ETN;LUG JAW 6Contact NOV7 7/8 HT200
25468 10375625‐001 Retainer, Proprietary;Tong Line Pin;Handling Tools;MANUAL TONG PARTS MISC;Type B, C, 10359291‐001 200510 Nut, Proprietary;Hinge pin;2.5"‐8UNC‐2B;Handling Tools;HT200;Matl AISI 4340
HT35 & HT55
25854 Contact NOV Contact NOV 10359300‐001 200543‐1 ETN;SHORT JAW,MACHINED HT‐65 TONG (T)
25864 10377704‐001 Handle;Short Jaw;Handling Tools;HT65 10359301‐001 200544‐1 Latch, Proprietary;Assembly;Handling Tools;HT65
30062 Contact NOV Contact NOV 10359311‐001 200550 Pin, Proprietary;Machining Hinge;Dia 1.87 in;L 5.875 in;Handling Tools;HT65;Matl BMS02CL‐
200;Hinge pin
30065 Contact NOV Contact NOV 10359317‐001 200564‐1 ETN;SHORT JAW ASSY. HT‐55
30068 Contact NOV Contact NOV 10359318‐001 200565‐1 Latch, Proprietary;for HT50/55;Handling Tools;MANUAL TONG PARTS MISC
30069 Contact NOV Contact NOV 10359320‐001 200566‐1 Latch, Proprietary;Jaw Assembly;Handling Tools;HT55
30707 Contact NOV Contact NOV 10359321‐001 200567 Pin, Proprietary;Machining Hinge THR;Dia 1.745 in;L 5.406 in;Handling Tools;HT55;Matl
BMS02CL‐200;Hinge pin THR. +HT50 w. lockbar slots
30727 Contact NOV Contact NOV 10359322‐001 200569 Block;for Hinge Pin;Handling Tools;HT55
30728 Contact NOV Contact NOV 10359323‐001 200570 Pin, Proprietary;Tong Line;Dia 1.938 in;L 7.375 in;Handling Tools;HT55
30793 Contact NOV Contact NOV 10359324‐001 200571 Plunger, Proprietary;Booster;Matl AISI 1020 Steel, Cadmium Plated;Handling Tools;HT‐55;L
3.375 in
30794 Contact NOV Contact NOV 10359337‐001 200584‐1 Tong Jaw;Hinge;13.3/8"Contact NOV 36";For HT50;Machining;PSL API 7K
30795 Contact NOV Contact NOV 10359338‐001 200585‐1 Tong Jaw;Hinge;‐;For HT50;Machining;PSL API 7K
30796 Contact NOV Contact NOV 10359339‐001 200586‐1 Tong Jaw;Hinge;‐;For HT50;Machining;PSL API 7K
30797 Contact NOV Contact NOV 10359341‐001 200587‐1 Latch, Proprietary;Jaw, Machining;Handling Tools;HT50
30798 Contact NOV Contact NOV 10359342‐001 200600‐1 Tong Head;25.1/2"Contact NOV 27";For HT50;Assembly;PSL API 7K;less Lever and Hanger
30808 10454436‐001 Nameplate;Type HT65 Manual Tong;Handling Tools;Matl 316 Stainless Steel 10359344‐001 200600‐2 Tong;Assembly, Casing Head 27.000Contact NOV 28.500, HT‐5;HT‐50
31055 Contact NOV Contact NOV 10359347‐001 200600‐4 Tong;Assembly, Casing Head 30.000Contact NOV 31.625, HT‐5;HT‐50
31056 Contact NOV Contact NOV 10359349‐001 200600‐5 Tong Head;31.1/2"Contact NOV 33";For HT50;Assembly;PSL API 7K;less Lever and Hanger
31057 Contact NOV Contact NOV 10359351‐001 200601‐1 ETN;LONG JAW,MACHINED HT‐50 TONG
31058 Contact NOV Contact NOV 10359352‐001 200603‐1 Latch, Proprietary;Jaw, Machined;Handling Tools;HT50
31059 Contact NOV Contact NOV 10359353‐001 200605‐1 ETN;HINGE JAW,MACHINED HT‐50 TONG
31060 Contact NOV Contact NOV 10359354‐001 200607‐1 Latch, Proprietary;Lug, Machined;Handling Tools;HT50
31061 Contact NOV Contact NOV 10359358‐001 200623‐1 ETN;LONG JAW HT35
31062 Contact NOV Contact NOV 10359359‐001 200624‐1 TONG JAW;SHORT;7"Contact NOV 10.3/4";FOR HT35;ASSEMBLY;PSL API 7K
31063 Contact NOV Contact NOV 10359360‐001 200625‐1 Tong Jaw;Short;2.3/8"Contact NOV 7";For HT35;Assembly;PSL API 7K
2 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
31065 Contact NOV Contact NOV 10359363‐001 200627‐1 ETN;HINGE JAW ASSY 7X8.5/8 HT‐35
33460 Contact NOV Contact NOV 10359364‐001 200629 Pin, Proprietary;Hinge;Dia 0.594 in;L 5.937 in;Handling Tools;HT35;Matl BMS02CL‐200;Class
200
33481 Contact NOV Contact NOV 10359365‐001 200630‐1 Hanger, Proprietary;Assembly;Handling Tools;HT35
33501 Contact NOV Contact NOV 10359366‐001 200632 Nut, Proprietary;Hinge Pin;0.750‐10 UNC‐1B;Handling Tools;HT35
33510 Contact NOV Contact NOV 10359370‐001 200642‐1 ETN;LONG JAW ASSY HT‐14
33516 Contact NOV Contact NOV 10360496‐001 16401‐6 Die;BJ Tong Blue Diamond;Thk 0.52 in;L 5 in;W 1.25 in
33517 Contact NOV Contact NOV 10362412‐001 203336 NOR;FILTER‐LOW‐PRESSURE,LMP110‐1‐B‐A‐B‐6‐PO1;FMP001327
33518 Contact NOV Contact NOV 10375323‐001 23915 Plunger, Proprietary;Latch Spring,Type HT14/F;Matl Bronze;Handling Tools;HT‐14;L 2.375 in
33519 Contact NOV Contact NOV 10375324‐001 23918 Retainer, Proprietary;Tong Line;Handling Tools;HT14;2.3/8"‐6.1/4" also for type LF
33561 10381208‐001 Clevis, Proprietary;Latch,Manual Tong;Handling Tools;HT200;Matl Steel 10375325‐001 23920 Spring;Latch;Handling Tools;HT14
33562 10381209‐001 Die;BJ Tong Coarse;Thk 0.875 in;L 6.875 in;W 3 in 10375326‐001 23922 Pin, Proprietary;Machining latch spring plunger for F‐TG;Dia 0.375 in;L 1.5 in;Handling
Tools;MANUAL TONG PARTS MISC;Matl Stress proof
33563 10381211‐001 Pin, Proprietary;Latch Clevis,Manual Tong;Dia 1 in;L 1.625 in;Handling Tools;HT200;Matl ETD‐ 10375465‐001 24249 Bolt, Proprietary;Tong Line Retainer;Thread 0.75 in;L 7.063 in;Handling Tools;MANUAL TONG
150 Steel;Phosphate PARTS MISC
33570 10381212‐001 Spring;Latchclevis HT200;Handling Tools;HT200;Matl 0.207 Dia Music Wire 10375467‐001 24525 Spring;Latch HT65/100;Handling Tools;HT65;Also for HT100
36528 10381298‐001 Plate, Proprietary;Mounting, Valve Air Lift;Handling Tools;HT200;L 6.5 in;W 3.5 in;Thk 0.25 10375468‐001 24526 Plunger, Proprietary;Latch Spring F/SDD/DB;Matl 4140 Steel;Multiple Product Lines;24526;L
in;Matl Steel 5.25 in
36529 10381299‐001 Bolt, Proprietary;U, for Air Lift Assembly;Thread 0.313 in;L 1 in;Handling Tools;HT200;Also 10375469‐001 24528 Nut, Proprietary;hinge pin, HT65/HT100;1.1/2‐6 NC‐2;Handling Tools;MANUAL TONG PARTS
suitable for other manual tongs MISC;Matl AISI 4140 HEX CD;Phosphate
37047 Contact NOV Contact NOV 10375470‐001 24529 Retainer, Proprietary;Tong Line, HT65 & HT100;Handling Tools;MANUAL TONG PARTS MISC
37092 Contact NOV Contact NOV 10375471‐001 24530 Pin, Proprietary;BJ Plunger, For SDD/DB Tong;Dia 0.625 in;L 2.625 in;Multiple Product
Lines;Matl 1045 Steel
51884 Contact NOV Contact NOV 10375504‐001 247500 Cylinder;Pneumatic,Clevis Mount;Barrel 6.5 in;Stroke 42 in;Not Certified;Rod Dia 1.375
in;Max WP 250 psi;‐10 to 165 F Temperature Range
52319 10034934‐005 Nameplate;Warning label (warehouse supply);Handling Tools;For Dies & Inserts 10375535‐001 250369 Cap, Proprietary;TONG PLASTIC SAFETY CAP FOR HAND;Handling Tools
53201 10490052‐001 Fitting, Grease;Airline Hydraulic;Straight;Dia 0.125 in;PTF;L 0.688 in;Shank L 0.297 in;Hex 10375537‐001 50006017 Sling, Proprietary;Snub line saver ass'y, HT200 HT100 HT65;Handling Tools;MANUAL TONG
0.438 in PARTS MISC
54149 Contact NOV Contact NOV 10375625‐001 25468 Retainer, Proprietary;Tong Line Pin;Handling Tools;MANUAL TONG PARTS MISC;Type B, C,
HT35 & HT55
54150 Contact NOV Contact NOV 10377704‐001 25864 Handle;Short Jaw;Handling Tools;HT65
54151 Contact NOV Contact NOV 10377708‐001 26119‐1 Nameplate;Type;Handling Tools;HT14;Also for HT35, Type C, F & LF manual tong
54157 10014374‐001 PCB;4 Terminal Controller;L 99 in;W 99 in 10377942‐001 30041‐1 Auxiliary Tool;Air Lift Assembly;Handling Tools;HT‐200
54158 10014546‐001 PCB Assembly;Term Controller;L 1 in;W 1 in 10381208‐001 33561 Clevis, Proprietary;Latch,Manual Tong;Handling Tools;HT200;Matl Steel
54159 Contact NOV Contact NOV 10381209‐001 33562 Die;BJ Tong Coarse;Thk 0.875 in;L 6.875 in;W 3 in
200071 10022158‐001 MANUAL TONG;HT100;RANGE 4"Contact NOV 17";LESS LUG JAWS;PSL API 7K 10381211‐001 33563 Pin, Proprietary;Latch Clevis,Manual Tong;Dia 1 in;L 1.625 in;Handling Tools;HT200;Matl ETD‐
150 Steel;Phosphate
200072 Contact NOV Contact NOV 10381212‐001 33570 Spring;Latchclevis HT200;Handling Tools;HT200;Matl 0.207 Dia Music Wire
200073 Contact NOV Contact NOV 10381298‐001 36528 Plate, Proprietary;Mounting, Valve Air Lift;Handling Tools;HT200;L 6.5 in;W 3.5 in;Thk 0.25
in;Matl Steel
200074 Contact NOV Contact NOV 10381299‐001 36529 Bolt, Proprietary;U, for Air Lift Assembly;Thread 0.313 in;L 1 in;Handling Tools;HT200;Also
suitable for other manual tongs
200076 Contact NOV Contact NOV 10383051‐001 8150 Nut, Proprietary;Hex, Link Block;0.750‐10 UNC‐2B;Handling Tools;Matl Scren
Stock;Phosphate;Adjustable Stop Pin
200077 Contact NOV Contact NOV 10446140‐001 11139 Stop, Proprietary;Adjustable;Handling Tools;HT55
200078 Contact NOV Contact NOV 10446156‐001 11144 Bushing, Proprietary;Plunger, Adjustable Jaw Stop;Handling Tools;HT55;OD 0.875 in;Thk
0.938 in
200079 Contact NOV Contact NOV 10446194‐001 11191 Bolt, Proprietary;Adjustable Stop;Thread 0.75 in;L 1 in;Handling Tools;HT55
200080 Contact NOV Contact NOV 10446196‐001 11192 Spring;Jaw Stop Plunger;Handling Tools;HT55;Phosphate;Also for type 'B' rotary tong
200081 Contact NOV Contact NOV 10446208‐001 11199 Pin, Proprietary;Dowel for HT tongs;Dia 0.312 in;L 3.188 in;Handling Tools
200082 Contact NOV Contact NOV 10446275‐001 11229 Spring;BOOSTER PLUNGER;Handling Tools;HT55;Also for type 'B' rotary tong
200083 Contact NOV Contact NOV 10447449‐001 12586 Manifold, Proprietary;Machining;Top Drives;PH‐100;Matl MS00019
200084 Contact NOV Contact NOV 10448273‐001 11883 Kit;General;Filter Regulator;Multiple Product Lines;N/A;NORGREN/B74G‐4AK‐QD3‐RMG
3 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
200088 Contact NOV Contact NOV 10449485‐001 200512 Carrier, Proprietary;Die, 6"Contact NOV 7.3/8";Multiple Product Lines
200089 Contact NOV Contact NOV 10449491‐001 200541‐1 Lever;Assembly;Handling Tools;HT65
200090 Contact NOV Contact NOV 10449492‐001 200542‐1 ETN;LONG JAW ASSY, HT‐65 TONG
200091 Contact NOV Contact NOV 10449506‐001 200551 Nameplate;Manual Tong;Handling Tools;HT65
200092 Contact NOV Contact NOV 10449509‐001 200562‐1 Lever;Short, Assembly;Handling Tools;HT55
200204 10359185‐001 Pin, Proprietary;Machining Hinge;Dia 1.994 in;L 6.125 in;Handling Tools;HT100;Matl 10449510‐001 200563‐1 ETN;LONG JAW ASSY HT‐55
BMS02CL‐200;Hinge pin
200500 10115238‐001 Manual Tong;HT200;Range 6"Contact NOV 16";Less Lug Jaws;PSL API 7K;with Air Lift 10449514‐001 200568 Nameplate;for;Handling Tools;HT55
Assembly
200501 Contact NOV Contact NOV 10449519‐001 200580‐1 Tong Head;13.3/8"Contact NOV 14.1/2";For HT50;Assembly;PSL API 7K;complete less Lever
and Hanger
200502 Contact NOV Contact NOV 10449520‐001 200580‐2 Tong Head;14.1/2"Contact NOV 16";For HT50;Assembly;PSL API 7K;less Lever and Hanger
200503 Contact NOV Contact NOV 10449521‐001 200580‐3 Tong Head;16"Contact NOV 17.1/2";For HT50;Assembly;PSL API 7K;less Lever and Hanger
200505 Contact NOV Contact NOV 10449524‐001 200580‐6 Tong Head;20"Contact NOV 21.1/2";For HT50;Assembly;PSL API 7K;less Lever and Hanger
200506 Contact NOV Contact NOV 10449525‐001 200580‐7 Tong Head;21.1/2"Contact NOV 23";For HT50;Assembly;PSL API 7K;less Lever and Hanger
200507 Contact NOV Contact NOV 10449527‐001 200581‐1 Tong Jaw;Long;‐;For HT50;Machining;PSL API 7K
200508 Contact NOV Contact NOV 10449528‐001 200582‐1 Tong Jaw;Short;‐;For HT50;Machining;PSL API 7K
200509 10449484‐001 Pin, Proprietary;Hinge, Machining;Dia 2.75 in;L 6.875 in;Handling Tools;HT200 10449534‐001 200602‐1 ETN;SHORT JAW,MACHINED HT‐50 TONG
200510 10359291‐001 Nut, Proprietary;Hinge pin;2.5"‐8UNC‐2B;Handling Tools;HT200;Matl AISI 4340 10449535‐001 200604‐1 ETN;HINGE,JAW HT‐50 TONG
200512 10449485‐001 Carrier, Proprietary;Die, 6"Contact NOV 7.3/8";Multiple Product Lines 10449536‐001 200606‐1 ETN;HINGE JAW ASSY 'F' HT‐50
200521 Contact NOV Contact NOV 10449538‐001 200620‐3 MANUAL TONG;HT35;RANGE 2.3/8"Contact NOV 7";SHORT LEVER; LESS LUG JAWS;PSL API
7K
200522 Contact NOV Contact NOV 10449539‐001 200621‐1 Lever;Long, Assembly;Handling Tools;HT35
200523 Contact NOV Contact NOV 10449540‐001 200622‐1 Lever;Short, Assembly;Handling Tools;HT35
200524 Contact NOV Contact NOV 10449544‐001 200626‐1 Latch, Proprietary;Long, Machining;Handling Tools;HT35
200525 Contact NOV Contact NOV 10449546‐001 200628‐1 ETN;HINGE JAW ASSY 9.5/8X10.3/4 HT‐35
200526 Contact NOV Contact NOV 10449548‐001 200631 Block;Lever Hinge Pin;Handling Tools;HT35
200527 Contact NOV Contact NOV 10449549‐001 200633 Pin, Proprietary;Tong Line;Dia 1.687 in;L 7 in;Handling Tools;HT35
200540 10022865‐001 Manual Tong;HT65;Range 3.1/2"Contact NOV 17";Less Lug Jaws;PSL API 7K 10449551‐001 200641‐1 Lever;Assembly;Handling Tools;HT14
200541 Contact NOV Contact NOV 10449554‐001 200643‐1 ETN;SHORT JAW ASSY HT‐14
200542 Contact NOV Contact NOV 10451011‐001 200644‐1 Latch, Proprietary;Assembly;Handling Tools;HT14
200543 Contact NOV Contact NOV 10451026‐001 200649 Pin, Proprietary;Hinge Pin;Dia 1 in;L 4.312 in;Handling Tools;HT14
200544 Contact NOV Contact NOV 10451027‐001 200650‐1 Hanger, Proprietary;Assembly;Handling Tools;HT14
200545 Contact NOV Contact NOV 10451029‐001 200661‐1 Lever;Assembly;Handling Tools;HT100
200546 Contact NOV Contact NOV 10451041‐001 200669 Nameplate;HT‐100 Tong;Handling Tools;Matl 316 Stainless Steel
200547 Contact NOV Contact NOV 10451558‐001 203438 Eye;Bolt, Hanger Adjustment;Handling Tools;MANUAL TONG PARTS MISC;*VAR 203438
200548 Contact NOV Contact NOV 10451559‐001 203438‐1 Eye;Bolt, Hanger Adjustment;Handling Tools;MANUAL TONG PARTS MISC
200549 Contact NOV Contact NOV 10451564‐001 203439 Element, Proprietary;GREEN AIR HOSE 19MMX30MM HANDLE GRIP MOD;Handling Tools
200550 10359311‐001 Pin, Proprietary;Machining Hinge;Dia 1.87 in;L 5.875 in;Handling Tools;HT65;Matl BMS02CL‐ 10452268‐001 203344‐48 Hanger, Proprietary;Assembly, 48";Handling Tools;HT50;Also for HT200/135/100/65/55
200;Hinge pin
200551 10449506‐001 Nameplate;Manual Tong;Handling Tools;HT65 10454436‐001 30808 Nameplate;Type HT65 Manual Tong;Handling Tools;Matl 316 Stainless Steel
200561 Contact NOV Contact NOV 10460597‐001 9561 SHA;Latch Spring / 'C'B'AA'GG'
200562 Contact NOV Contact NOV 10460928‐001 BJ12863 Ring, Proprietary;SUSPENSION RING ALL HT‐TONGS;Handling Tools;MANUAL TONG PARTS
MISC
200563 Contact NOV Contact NOV 10460929‐001 BJ17194 Pin, Proprietary;Die Retainer for Manual Tongs;Dia 0.375 in;L 0.75 in;Handling
Tools;MANUAL TONG PARTS MISC;Matl AISI 1020 HR;Phosphate
200564 Contact NOV Contact NOV 10462707‐001 939099‐108 Screw, Cap Modified;Hex Head;Drilled Shank;1.000‐8 UNC‐2A;Partially Threaded;L 3.25
in;Matl SAE J429 Grade 8
200565 Contact NOV Contact NOV 10462708‐001 939099‐165 Screw, Cap Modified;Hex Head;Drilled Shank;0.625‐11 UNC‐2A;Partially Threaded;L 4.75
in;Matl SAE J429 Grade 8
200566 Contact NOV Contact NOV 10462709‐001 939099‐204 Screw, Cap Modified;Hex Head;Drilled Shank;0.500‐13 UNC‐2A;Partially Threaded;L 5.75
in;Matl SAE J429 Grade 8
200567 10359321‐001 Pin, Proprietary;Machining Hinge THR;Dia 1.745 in;L 5.406 in;Handling Tools;HT55;Matl 10462713‐001 939099‐801 Screw, Cap Modified;Hex Head;Drilled Shank;0.875‐9 UNC‐2A;Partially Threaded;L 10.5
BMS02CL‐200;Hinge pin THR. +HT50 w. lockbar slots in;Matl SAE J429 Grade 8;Zinc Plated
4 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
200568 10449514‐001 Nameplate;for;Handling Tools;HT55 10462714‐001 939107‐516 Screw, Cap;Square Head;0.875‐9 UNC‐2A;L 5 in;Partially Threaded;Matl SAE J429 Grade
8;Zinc Plated;US Standard
200569 10359322‐001 Block;for Hinge Pin;Handling Tools;HT55 10462716‐001 939168‐96 Screw, Cap;Square Head;0.750‐10 UNC‐2A;L 2.5 in;Fully Threaded;Matl (Alloy Steel);Zinc
Plated;US Standard
200570 10359323‐001 Pin, Proprietary;Tong Line;Dia 1.938 in;L 7.375 in;Handling Tools;HT55 10462733‐001 939521‐75 Sling, Proprietary;WIRE ROPE SLING (1/2 X4FT) HT200;Handling Tools;HT200
200571 10359324‐001 Plunger, Proprietary;Booster;Matl AISI 1020 Steel, Cadmium Plated;Handling Tools;HT‐55;L 10464778‐001 941091‐3 Shackle;Anchor, Screw Pin;Matl Alloy Steel, Forged;0.625 in;3.25 Ton;0.75 in;Hot Dipped
3.375 in Galvanized;Crosby/G‐209/1018473
200572 10137417‐001 Nut, Proprietary;Hinge pin;1"‐8 UNC‐1B;Handling Tools;HT55;Matl AISI 4340 10464788‐001 941482‐18 ETN;90 DEG. ELBOW, MALE TO MALE;AEROQUIP/2003‐6‐8‐B
200581 Contact NOV Contact NOV 10464873‐001 943991‐1 Valve, Control;Directional;Conn 1 Straight Female NPTFContact NOV6;Conn 2 Straight Female
NPTFContact NOV6;Matl Brass;Max 200 psi;Not Certified;Spring Centered
200582 Contact NOV Contact NOV 10464884‐001 944423‐16 Nut;Lock,Flex‐top;1.000‐8 UNC‐2B;Matl Steel;Cadmium Plated
200583 Contact NOV Contact NOV 10467035‐001 947129‐194 Pin, Roll;Spiral;Dia 0.375 in;L 1.5 in;Matl Steel;Plain
200584 Contact NOV Contact NOV 10467069‐001 948033‐5 Shackle;Eye and Eye Swivel;Matl Forged Steel;0.625 in;2 Tons;Galvanized;H 5.875 in x W
3.063 in x 0.782 in Thk
200585 Contact NOV Contact NOV 10467114‐001 950152‐819 Hose Assembly, SAE Hydraulic;‐6;100R6;L 120 in;Crimp,Non‐Skive;Conn 1 Straight Female
SAE/JIC 37? SwivelContact NOV6;Conn 2 Straight Female SAE/JIC 37? SwivelContact NOV6
200586 Contact NOV Contact NOV 10467134‐001 950502‐4 Filter;Noise;0.500 in MNPT;Quiet Flow Muffler Filter, HT200;40 Micron;Sintered Bronze;Pipe
Threaded;ARROW/ASP‐4
200587 Contact NOV Contact NOV 10469022‐001 59001003‐11 Shackle;Chain, Bolt;Matl Alloy Steel, Forged;1.125 in;9.5 Ton;1.25 in;Hot Dipped
Galvanized;Crosby/G‐2150/1019873
200601 Contact NOV Contact NOV 10469023‐001 59001004‐11 Kit;Installation;CROSBY BOLT NUT&COTTER PIN 1 1/8;Multiple Product Lines;N/A
200602 Contact NOV Contact NOV 10490000‐080 50212‐C Nut;Hex;0.750‐10 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard
200603 Contact NOV Contact NOV 10490000‐087 50214‐C Nut;Hex;0.875‐9 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard
200604 Contact NOV Contact NOV 10490001‐038 50312‐C Nut;Hex, Jam;0.750‐10 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard
200605 Contact NOV Contact NOV 10490001‐043 50314‐C Nut;Hex, Jam;0.875‐9 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard
200606 Contact NOV Contact NOV 10490003‐019 50508‐C Nut;Slotted Hex;0.500‐13 UNC‐2B;Matl ASTM A563 Grade A;Plain;US Standard
200607 Contact NOV Contact NOV 10490003‐025 50510‐C Nut;Slotted Hex;0.625‐11 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard
200621 Contact NOV Contact NOV 10490003‐029 50512‐C Nut;Slotted Hex;0.750‐10 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard
200622 Contact NOV Contact NOV 10490003‐033 50514‐C Nut;Slotted Hex;0.875‐9 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard
200623 Contact NOV Contact NOV 10490005‐032 51850‐10‐C Nut;Hex Lock;0.625‐11 UNC‐2B;Matl Steel;Zinc Plated;US Standard;Nylon Insert
200624 Contact NOV Contact NOV 10490015‐196 50809‐N‐C Washer;Flat,Narrow;Nom Sz 0.563 in;Matl Steel;Zinc Plated;Thk 0.063 in;OD 1.125 in
200625 Contact NOV Contact NOV 10490015‐224 50810‐R‐C Washer;Flat;Nom Sz 0.625 in;Matl Steel;Zinc Plated;Thk 1 in;OD 1.75 in
200626 Contact NOV Contact NOV 10490016‐038 50912‐C Washer;Helical Spring;Nom Sz 0.750 in;Matl Steel;Zinc Plated;Regular
200627 Contact NOV Contact NOV 10490024‐022 51402‐6 Pin, Cotter;Standard;Dia 0.125 in;L 0.75 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in
200628 Contact NOV Contact NOV 10490024‐024 51402‐8 Pin, Cotter;Standard;Dia 0.125 in;L 1 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in
200629 10359364‐001 Pin, Proprietary;Hinge;Dia 0.594 in;L 5.937 in;Handling Tools;HT35;Matl BMS02CL‐200;Class 10490024‐030 51402‐12 Pin, Cotter;Standard;Dia 0.125 in;L 1.5 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in
200
200631 10449548‐001 Block;Lever Hinge Pin;Handling Tools;HT35 10490024‐032 51402‐14 Pin, Cotter;Standard;Dia 0.125 in;L 1.75 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in
200632 10359366‐001 Nut, Proprietary;Hinge Pin;0.750‐10 UNC‐1B;Handling Tools;HT35 10490024‐034 51402‐16 Pin, Cotter;Standard;Dia 0.125 in;L 2 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in
200633 10449549‐001 Pin, Proprietary;Tong Line;Dia 1.687 in;L 7 in;Handling Tools;HT35 10490024‐065 51403‐24 Pin, Cotter;Standard;Dia 0.188 in;L 3 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.203 in
200641 Contact NOV Contact NOV 10490024‐118 51405‐24 Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl Steel;Zinc Plated
200642 Contact NOV Contact NOV 10490024‐119 51405‐20 Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl 304 Stainless;Plain
200643 Contact NOV Contact NOV 10490024‐119 51405‐20 REPLACED Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl 304 Stainless;Plain
BY P/N 51405‐24‐S
200644 Contact NOV Contact NOV 10490024‐119 51405‐24‐S Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl 304 Stainless;Plain
200645 Contact NOV Contact NOV 10490024‐215 51435‐12 Pin, Cotter;Standard;Dia 0.156 in;L 1.5 in;Matl Steel;Zinc Plated
200646 Contact NOV Contact NOV 10490024‐223 51435‐20 Pin, Cotter;Standard;Dia 0.312 in;L 2.5 in;Matl 17‐4 Stainless;Zinc Plated
200647 Contact NOV Contact NOV 10490025‐021 51506‐8 Pin, Grooved;G (end groove with shoulder);Dia 0.375 in;L 1 in;Matl 450 Stainless;Plain
200648 Contact NOV Contact NOV 10490026‐062 56405‐40‐SHP Pin, Clevis;SAE J493 *;Dia 0.313 in;L 5 in;Through Hole;Matl Steel;Cadmium Plated;Case
Hardened
200649 10451026‐001 Pin, Proprietary;Hinge Pin;Dia 1 in;L 4.312 in;Handling Tools;HT14 10490052‐001 53201 Fitting, Grease;Airline Hydraulic;Straight;Dia 0.125 in;PTF;L 0.688 in;Shank L 0.297 in;Hex
0.438 in
5 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
200661 Contact NOV Contact NOV 10490096‐007 940093‐3 REPLACED Pipe Fitting, Threaded;Matl Iron,Cast;Elbow,90? Street,0.375
BY 52406‐B in,Common;Black;NPT;Malleable, Short
200662 Contact NOV Contact NOV 10490140‐160 946281‐16 USE 56501‐ ADAPTER (2);CONNECTOR;0.375‐18 MNPT;MALE SAE/JIC 37?Contact NOV6;MATL STEEL;ZINC
6‐6‐S PLATED
200663 Contact NOV Contact NOV 10490142‐105 946301‐16 REPLACED ADAPTER (2);ELBOW,90?;0.375‐18 MNPT;MALE SAE/JIC 37?Contact NOV6;MATL
BY 56506‐6‐6‐S STEEL;PLAIN;TUBE O.D. 0.375
200664 10022964‐001 Tong Jaw;Lug;8.1/2"Contact NOV 12";For HT100;Machining;PSL API 7K 10490362‐144 50010‐52‐C8 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 6.5 in;Fully Threaded;Matl SAE J429 Grade 8;Hot
Dip Galvanized (tZn);US Standard
200665 10022981‐001 Tong Jaw;Lug;12"Contact NOV 15";For HT100;Machining;PSL API 7K 10490362‐146 50010‐54‐C8 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 6.75 in;Fully Threaded;Matl SAE J429 Grade 8;Hot
Dip Galvanized (tZn);US Standard
200666 10022991‐001 Tong Jaw;Lug;15.3/4";For HT100;Assembly;PSL API 7K 10490362‐153 50010‐60‐C8 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 7.5 in;Fully Threaded;Matl SAE J429 Grade 8;Hot
Dip Galvanized (tZn);US Standard
200667 10022992‐001 Tong Jaw;Lug;16"Contact NOV 17";For HT100;Assembly;PSL API 7K 10490362‐165 50010‐76‐C8 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 9.5 in;Fully Threaded;Matl SAE J429 Grade 8;Hot
Dip Galvanized (tZn);US Standard
200669 10451041‐001 Nameplate;HT‐100 Tong;Handling Tools;Matl 316 Stainless Steel 10490362‐329 50012‐56‐C8 Screw, Cap;Hex Head;0.750‐10 UNC‐2A;L 7 in;Fully Threaded;Matl SAE J429 Grade 8;Hot Dip
Galvanized (tZn);US Standard
201350 10137571‐001 Nameplate;Warning label;Multiple Product Lines 10542919‐001 53000‐16 Pipe Fitting, Threaded;Matl Stainless;Plug,Hex Head,1.000 in,Common;Plain;NPT;304
Stainless
203336 10362412‐001 NOR;FILTER‐LOW‐PRESSURE,LMP110‐1‐B‐A‐B‐6‐PO1;FMP001327 10657134‐001 200620‐1 Manual Tong;HT35;Range 7.5/8"Contact NOV 10.3/4";Short Lever; Less Lug Jaws;API 7K
203337 Contact NOV Contact NOV 10777544‐001 18430 NOR;TEFLON WASHER M50 PTFE 1252986
203338 Contact NOV Contact NOV 10796067‐001 203378 NOR;LOAD CONTROL VALVE, CBBC‐LHN‐YEV/S
203339 Contact NOV Contact NOV 10820588‐001 203358 LUG;LUG JAW 15.3/4 HT‐100;HANDLING TOOLS
203340 Contact NOV Contact NOV Contact NOV 13285 Contact NOV
203341 Contact NOV Contact NOV Contact NOV 200525 Contact NOV
203342 Contact NOV Contact NOV Contact NOV 203377 Contact NOV
203351 Contact NOV Contact NOV Contact NOV 939369‐17 Contact NOV
203352 Contact NOV Contact NOV Contact NOV 9568 Contact NOV
203353 Contact NOV Contact NOV Contact NOV 11138 Contact NOV
203354 Contact NOV Contact NOV Contact NOV 11194 Contact NOV
203355 Contact NOV Contact NOV Contact NOV 11195 Contact NOV
203356 Contact NOV Contact NOV Contact NOV 11196 Contact NOV
203357 Contact NOV Contact NOV Contact NOV 11197 Contact NOV
203358 10820588‐001 LUG;LUG JAW 15.3/4 HT‐100;HANDLING TOOLS Contact NOV 11297 Contact NOV
203359 Contact NOV Contact NOV Contact NOV 11511 Contact NOV
203360 Contact NOV Contact NOV Contact NOV 11513 Contact NOV
203366 Contact NOV Contact NOV Contact NOV 11516 Contact NOV
203367 Contact NOV Contact NOV Contact NOV 11765 Contact NOV
203368 Contact NOV Contact NOV Contact NOV 11941 Contact NOV
203369 Contact NOV Contact NOV Contact NOV 11942 Contact NOV
203370 Contact NOV Contact NOV Contact NOV 12434 Contact NOV
203371 Contact NOV Contact NOV Contact NOV 13798 Contact NOV
203372 Contact NOV Contact NOV Contact NOV 13799 Contact NOV
203373 Contact NOV Contact NOV Contact NOV 15468 ELBOW CONNECTOR, 35‐1 1/4"2R
203374 Contact NOV Contact NOV Contact NOV 23622 Contact NOV
203375 Contact NOV Contact NOV Contact NOV 23908 Contact NOV
203376 Contact NOV Contact NOV Contact NOV 23909 Contact NOV
203377 Contact NOV Contact NOV Contact NOV 23910 Contact NOV
203378 10796067‐001 NOR;LOAD CONTROL VALVE, CBBC‐LHN‐YEV/S Contact NOV 23911 Contact NOV
203379 Contact NOV Contact NOV Contact NOV 23912 Contact NOV
203381 Contact NOV Contact NOV Contact NOV 23913 Contact NOV
203388 Contact NOV Contact NOV Contact NOV 23914 Contact NOV
203389 Contact NOV Contact NOV Contact NOV 23927 Contact NOV
203390 Contact NOV Contact NOV Contact NOV 23930 Contact NOV
203391 Contact NOV Contact NOV Contact NOV 23931 Contact NOV
203392 Contact NOV Contact NOV Contact NOV 23932 Contact NOV
203394 Contact NOV Contact NOV Contact NOV 23933 Contact NOV
203395 Contact NOV Contact NOV Contact NOV 23934 Contact NOV
203396 Contact NOV Contact NOV Contact NOV 23935 Contact NOV
203397 Contact NOV Contact NOV Contact NOV 23936 Contact NOV
6 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
203398 Contact NOV Contact NOV Contact NOV 23937 Contact NOV
203399 Contact NOV Contact NOV Contact NOV 23938 Contact NOV
203400 Contact NOV Contact NOV Contact NOV 23939 Contact NOV
203401 Contact NOV Contact NOV Contact NOV 24592 Contact NOV
203402 Contact NOV Contact NOV Contact NOV 25010 Contact NOV
203403 Contact NOV Contact NOV Contact NOV 25011 Contact NOV
203438 10451558‐001 Eye;Bolt, Hanger Adjustment;Handling Tools;MANUAL TONG PARTS MISC;*VAR 203438 Contact NOV 25012 Contact NOV
203439 10451564‐001 Element, Proprietary;GREEN AIR HOSE 19MMX30MM HANDLE GRIP MOD;Handling Tools Contact NOV 25854 Contact NOV
247500 10375504‐001 Cylinder;Pneumatic,Clevis Mount;Barrel 6.5 in;Stroke 42 in;Not Certified;Rod Dia 1.375 Contact NOV 30062 Contact NOV
in;Max WP 250 psi;‐10 to 165 F Temperature Range
250369 10375535‐001 Cap, Proprietary;TONG PLASTIC SAFETY CAP FOR HAND;Handling Tools Contact NOV 30065 Contact NOV
2000504 Contact NOV Contact NOV Contact NOV 30068 Contact NOV
50006015 Contact NOV Contact NOV Contact NOV 30069 Contact NOV
50006016 10081212‐001 WLY;Box, Base Style, Versamax Carr Contact NOV 30707 Contact NOV
50006017 10375537‐001 Sling, Proprietary;Snub line saver ass'y, HT200 HT100 HT65;Handling Tools;MANUAL TONG Contact NOV 30727 Contact NOV
PARTS MISC
11939‐3 Contact NOV Contact NOV Contact NOV 30728 Contact NOV
11940‐1 Contact NOV Contact NOV Contact NOV 30793 Contact NOV
13285‐3 Contact NOV Contact NOV Contact NOV 30794 Contact NOV
16401‐6 10360496‐001 Die;BJ Tong Blue Diamond;Thk 0.52 in;L 5 in;W 1.25 in Contact NOV 30795 Contact NOV
16402‐6 10020825‐001 Die;BJ Tong Blue Diamond;Thk 0.5 in;L 5.7 in;W 1.25 in Contact NOV 30796 Contact NOV
200072‐1 10359126‐001 TONG JAW;LONG;4"Contact NOV 17";FOR HT100;ASSEMBLY;PSL API 7K Contact NOV 30797 Contact NOV
200073‐1 10359128‐001 Latch, Proprietary;Assembly;Handling Tools;HT100 Contact NOV 30798 Contact NOV
200074‐1 10359131‐001 ETN;ASSEMBLY,SHORT JAW,HT‐100 TONG Contact NOV 31055 Contact NOV
200076‐1 10022167‐001 Tong Jaw;Lug;2.3/8"Contact NOV 3.668";For HT35;Assembly;PSL API 7K Contact NOV 31056 Contact NOV
200077‐1 10359137‐001 Tong Jaw;Lug;2.7/8"Contact NOV 4.1/4";For HT35;Assembly;PSL API 7K Contact NOV 31057 Contact NOV
200078‐1 10022172‐001 Tong Jaw;Lug;3.1/2"Contact NOV 5.1/4";For HT35;Assembly;PSL API 7K Contact NOV 31058 Contact NOV
200079‐1 10022179‐001 Tong Jaw;Lug;5.1/4"Contact NOV 7";For HT35;Assembly;PSL API 7K Contact NOV 31059 Contact NOV
200080‐1 10359144‐001 ETN;LUG JAW 7X8.5/8 HT‐35 Contact NOV 31060 Contact NOV
200080‐2 10359145‐001 TONG JAW;HINGE AND LUG;7"Contact NOV 8.5/8";FOR HT35;ASSEMBLY;PSL API 7K Contact NOV 31061 Contact NOV
200081‐1 10359148‐001 ETN;LUG JAW 9.5/8X10.3/4 HT‐35 Contact NOV 31062 Contact NOV
200081‐2 10359149‐001 TONG JAW;HINGE AND LUG;9.5/8"Contact NOV 10.3/4";FOR HT35;ASSEMBLY;PSL API 7K Contact NOV 31063 Contact NOV
200083‐1 10022188‐001 Tong Jaw;Lug;3.1/2"Contact NOV 5";For HT55;Assembly;PSL API 7K Contact NOV 31065 Contact NOV
200084‐1 10022189‐001 Tong Jaw;Lug;5"Contact NOV 6.3/4";For HT55;Assembly;PSL API 7K Contact NOV 33460 Contact NOV
200085‐1 10022190‐001 Tong Jaw;Lug;6.5/8"Contact NOV 9";For HT55;Assembly;PSL API 7K Contact NOV 33481 Contact NOV
200086‐1 10022195‐001 Tong Jaw;Lug;9"Contact NOV 10.3/4";For HT55;Assembly;PSL API 7K Contact NOV 33501 Contact NOV
200087‐1 10022196‐001 Tong Jaw;Lug;11.3/4";For HT55;Assembly;PSL API 7K Contact NOV 33510 Contact NOV
200088‐1 10359156‐001 Tong Jaw;Lug;12";For HT55;Assembly;PSL API 7K Contact NOV 33516 Contact NOV
200089‐1 10022202‐001 TONG JAW;LUG;12.3/4"Contact NOV 13";FOR HT55;ASSEMBLY;PSL API 7K Contact NOV 33517 Contact NOV
200090‐1 10022204‐001 Tong Jaw;Lug;13.3/8";For HT55;Assembly;PSL API 7K Contact NOV 33518 Contact NOV
200501‐1 10449473‐001 Lever;Assembly;Handling Tools;HT200 Contact NOV 33519 Contact NOV
200501‐3W Contact NOV Contact NOV Contact NOV 37047 Contact NOV
200502‐1 10449474‐001 ETN;LONG JAW ASSY HT‐200 Contact NOV 37092 Contact NOV
200502‐3W Contact NOV Contact NOV Contact NOV 51884 Contact NOV
200503‐1 10359282‐001 ETN;SHORT JAW ASSY.HT‐2 Contact NOV 54149 Contact NOV
200504‐1 10359283‐001 Latch, Proprietary;Assembly;Handling Tools;HT200 Contact NOV 54150 Contact NOV
200504‐3W Contact NOV Contact NOV Contact NOV 54151 Contact NOV
200505‐1 10022861‐001 Tong Jaw;Hinge;11.1/2"Contact NOV 16";For HT200;Assembly;PSL API 7K Contact NOV 54159 Contact NOV
200506‐1 10022862‐001 Latch, Proprietary;Jaw ass'y. 8"X9.5/8";Handling Tools;HT200 Contact NOV 200072 Contact NOV
200506‐3W Contact NOV Contact NOV Contact NOV 200073 Contact NOV
200506‐SP 10359287‐001 ETN;LUG JAW 6Contact NOV7 7/8 HT200 Contact NOV 200074 Contact NOV
200506‐SP‐M Contact NOV Contact NOV Contact NOV 200076 Contact NOV
200507‐1 10115239‐001 Tong Jaw;Lug;9"Contact NOV 11.1/8";For HT200;Assembly;PSL API 7K;Or 13"Contact NOV Contact NOV 200077 Contact NOV
14.3/4"
200507‐3W Contact NOV Contact NOV Contact NOV 200078 Contact NOV
200508‐1 10022864‐001 Tong Jaw;Lug;11"Contact NOV 12.1/2";For HT200;Assembly;PSL API 7K;Also for Contact NOV 200079 Contact NOV
14.3/8"Contact NOV 16" If Used With Hinge Jaw
7 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
200508‐3W Contact NOV Contact NOV Contact NOV 200080 Contact NOV
200521‐3W Contact NOV Contact NOV Contact NOV 200081 Contact NOV
200522‐3W Contact NOV Contact NOV Contact NOV 200082 Contact NOV
200524‐3W Contact NOV Contact NOV Contact NOV 200083 Contact NOV
200525‐3W Contact NOV Contact NOV Contact NOV 200084 Contact NOV
200526‐3W Contact NOV Contact NOV Contact NOV 200085 Contact NOV
200527‐3W Contact NOV Contact NOV Contact NOV 200086 Contact NOV
200541‐1 10449491‐001 Lever;Assembly;Handling Tools;HT65 Contact NOV 200087 Contact NOV
200542‐1 10449492‐001 ETN;LONG JAW ASSY, HT‐65 TONG Contact NOV 200088 Contact NOV
200543‐1 10359300‐001 ETN;SHORT JAW,MACHINED HT‐65 TONG (T) Contact NOV 200089 Contact NOV
200544‐1 10359301‐001 Latch, Proprietary;Assembly;Handling Tools;HT65 Contact NOV 200090 Contact NOV
200544‐4 Contact NOV Contact NOV Contact NOV 200091 Contact NOV
200545‐1 10022869‐001 Tong Jaw;Hinge;8"Contact NOV 17";For HT65;Assembly;PSL API 7K Contact NOV 200092 Contact NOV
200546‐1 10022870‐001 Tong Jaw;Lug;3.1/2"Contact NOV 8.1/4";For HT65;Assembly;PSL API 7K Contact NOV 200501 Contact NOV
200547‐1 10022871‐001 Tong Jaw;Lug;8"Contact NOV 11.1/4";For HT65;Assembly;PSL API 7K Contact NOV 200502 Contact NOV
200548‐1 10022872‐001 Tong Jaw;Lug;11.3/4"Contact NOV 14.3/8";For HT65;Assembly;PSL API 7K Contact NOV 200503 Contact NOV
200549‐1 10022873‐001 Tong Jaw;Lug;16"Contact NOV 17";For HT65;Assembly;PSL API 7K Contact NOV 200505 Contact NOV
200561‐1 10022879‐001 MANUAL TONG;HT55;RANGEContact NOV;LONG LEVER; LESS LUG JAWS;PSL API 7K;JS_ Contact NOV 200506 Contact NOV
CHECK RANGE
200562‐1 10449509‐001 Lever;Short, Assembly;Handling Tools;HT55 Contact NOV 200507 Contact NOV
200563‐1 10449510‐001 ETN;LONG JAW ASSY HT‐55 Contact NOV 200508 Contact NOV
200564‐1 10359317‐001 ETN;SHORT JAW ASSY. HT‐55 Contact NOV 200521 Contact NOV
200565‐1 10359318‐001 Latch, Proprietary;for HT50/55;Handling Tools;MANUAL TONG PARTS MISC Contact NOV 200522 Contact NOV
200566‐1 10359320‐001 Latch, Proprietary;Jaw Assembly;Handling Tools;HT55 Contact NOV 200523 Contact NOV
200566‐3W Contact NOV Contact NOV Contact NOV 200524 Contact NOV
200580‐1 10449519‐001 Tong Head;13.3/8"Contact NOV 14.1/2";For HT50;Assembly;PSL API 7K;complete less Lever Contact NOV 200526 Contact NOV
and Hanger
200580‐2 10449520‐001 Tong Head;14.1/2"Contact NOV 16";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200527 Contact NOV
200580‐3 10449521‐001 Tong Head;16"Contact NOV 17.1/2";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200541 Contact NOV
200580‐4 10111280‐001 Tong Head;17.1/2"Contact NOV 19";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200542 Contact NOV
also suitable for 13.3/8"‐16
200580‐5 10111281‐001 Tong Head;19"Contact NOV 20";For HT50;Assembly;PSL API 7K;Less Lever and Hanger Contact NOV 200543 Contact NOV
200580‐6 10449524‐001 Tong Head;20"Contact NOV 21.1/2";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200544 Contact NOV
200580‐7 10449525‐001 Tong Head;21.1/2"Contact NOV 23";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200545 Contact NOV
200580‐8 10088121‐001 Tong Head;24"Contact NOV 25.1/2";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200546 Contact NOV
200581‐1 10449527‐001 Tong Jaw;Long;‐;For HT50;Machining;PSL API 7K Contact NOV 200547 Contact NOV
200582‐1 10449528‐001 Tong Jaw;Short;‐;For HT50;Machining;PSL API 7K Contact NOV 200548 Contact NOV
200582‐3W Contact NOV Contact NOV Contact NOV 200549 Contact NOV
2005831‐1 Contact NOV Contact NOV Contact NOV 200561 Contact NOV
200583‐3W Contact NOV Contact NOV Contact NOV 200562 Contact NOV
200584‐1 10359337‐001 Tong Jaw;Hinge;13.3/8"Contact NOV 36";For HT50;Machining;PSL API 7K Contact NOV 200563 Contact NOV
200585‐1 10359338‐001 Tong Jaw;Hinge;‐;For HT50;Machining;PSL API 7K Contact NOV 200564 Contact NOV
200586‐1 10359339‐001 Tong Jaw;Hinge;‐;For HT50;Machining;PSL API 7K Contact NOV 200565 Contact NOV
200587‐1 10359341‐001 Latch, Proprietary;Jaw, Machining;Handling Tools;HT50 Contact NOV 200566 Contact NOV
200587‐3W Contact NOV Contact NOV Contact NOV 200581 Contact NOV
200600‐1 10359342‐001 Tong Head;25.1/2"Contact NOV 27";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200582 Contact NOV
200600‐2 10359344‐001 Tong;Assembly, Casing Head 27.000Contact NOV 28.500, HT‐5;HT‐50 Contact NOV 200583 Contact NOV
200600‐3 10022889‐001 Tong Head;28.1/2"Contact NOV 30";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200584 Contact NOV
200600‐4 10359347‐001 Tong;Assembly, Casing Head 30.000Contact NOV 31.625, HT‐5;HT‐50 Contact NOV 200585 Contact NOV
200600‐5 10359349‐001 Tong Head;31.1/2"Contact NOV 33";For HT50;Assembly;PSL API 7K;less Lever and Hanger Contact NOV 200586 Contact NOV
200600‐6 Contact NOV BJHT‐50 TON HEAD ASSY, LESS LEVER & HANGER 33" Contact NOV 200587 Contact NOV
200600‐7 10022891‐001 Tong; Assembly, Casing Head 34.500Contact NOV 36.000, HT‐50; ; ; ; ; ; ; Contact NOV 200601 Contact NOV
8 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
200601‐1 10359351‐001 ETN;LONG JAW,MACHINED HT‐50 TONG Contact NOV 200602 Contact NOV
200602‐1 10449534‐001 ETN;SHORT JAW,MACHINED HT‐50 TONG Contact NOV 200603 Contact NOV
200602‐3W Contact NOV Contact NOV Contact NOV 200604 Contact NOV
200603‐1 10359352‐001 Latch, Proprietary;Jaw, Machined;Handling Tools;HT50 Contact NOV 200605 Contact NOV
200604‐1 10449535‐001 ETN;HINGE,JAW HT‐50 TONG Contact NOV 200606 Contact NOV
200605‐1 10359353‐001 ETN;HINGE JAW,MACHINED HT‐50 TONG Contact NOV 200607 Contact NOV
200606‐1 10449536‐001 ETN;HINGE JAW ASSY 'F' HT‐50 Contact NOV 200621 Contact NOV
200607‐1 10359354‐001 Latch, Proprietary;Lug, Machined;Handling Tools;HT50 Contact NOV 200622 Contact NOV
200607‐2M Contact NOV Contact NOV Contact NOV 200623 Contact NOV
200620‐1 10657134‐001 Manual Tong;HT35;Range 7.5/8"Contact NOV 10.3/4";Short Lever; Less Lug Jaws;API 7K Contact NOV 200624 Contact NOV
200620‐2 10022900‐001 MANUAL TONG;HT35;RANGE 2.3/8"Contact NOV 7";LONG LEVER; LESS LUG JAWS;PSL API 7K Contact NOV 200625 Contact NOV
200620‐3 10449538‐001 MANUAL TONG;HT35;RANGE 2.3/8"Contact NOV 7";SHORT LEVER; LESS LUG JAWS;PSL API Contact NOV 200626 Contact NOV
7K
200621‐1 10449539‐001 Lever;Long, Assembly;Handling Tools;HT35 Contact NOV 200627 Contact NOV
200622‐1 10449540‐001 Lever;Short, Assembly;Handling Tools;HT35 Contact NOV 200628 Contact NOV
200623‐1 10359358‐001 ETN;LONG JAW HT35 Contact NOV 200641 Contact NOV
200624‐1 10359359‐001 TONG JAW;SHORT;7"Contact NOV 10.3/4";FOR HT35;ASSEMBLY;PSL API 7K Contact NOV 200642 Contact NOV
200625‐1 10359360‐001 Tong Jaw;Short;2.3/8"Contact NOV 7";For HT35;Assembly;PSL API 7K Contact NOV 200643 Contact NOV
200626‐1 10449544‐001 Latch, Proprietary;Long, Machining;Handling Tools;HT35 Contact NOV 200644 Contact NOV
200627‐1 10359363‐001 ETN;HINGE JAW ASSY 7X8.5/8 HT‐35 Contact NOV 200645 Contact NOV
200628‐1 10449546‐001 ETN;HINGE JAW ASSY 9.5/8X10.3/4 HT‐35 Contact NOV 200646 Contact NOV
200630‐1 10359365‐001 Hanger, Proprietary;Assembly;Handling Tools;HT35 Contact NOV 200647 Contact NOV
200641‐1 10449551‐001 Lever;Assembly;Handling Tools;HT14 Contact NOV 200648 Contact NOV
200641‐3W Contact NOV Contact NOV Contact NOV 200661 Contact NOV
200642‐1 10359370‐001 ETN;LONG JAW ASSY HT‐14 Contact NOV 200662 Contact NOV
200642‐3W Contact NOV Contact NOV Contact NOV 200663 Contact NOV
200643‐1 10449554‐001 ETN;SHORT JAW ASSY HT‐14 Contact NOV 203337 Contact NOV
200644‐1 10451011‐001 Latch, Proprietary;Assembly;Handling Tools;HT14 Contact NOV 203338 Contact NOV
200644‐3W Contact NOV Contact NOV Contact NOV 203339 Contact NOV
200645‐1 10022941‐001 Tong Jaw;Lug;2.3/8"Contact NOV 3.1/2";For HT14;Assembly;PSL API 7K Contact NOV 203340 Contact NOV
200645‐3W Contact NOV Contact NOV Contact NOV 203341 Contact NOV
200646‐1 10022946‐001 Tong Jaw;Lug;3.1/2"Contact NOV 5";For HT14;Assembly;PSL API 7K;Latchlug Contact NOV 203342 Contact NOV
200646‐3W Contact NOV Contact NOV Contact NOV 203351 Contact NOV
200647‐1 10022950‐001 Tong Jaw;Lug;4.3/4"Contact NOV 6.1/4";For HT14;Assembly;PSL API 7K;Latchlug Contact NOV 203352 Contact NOV
200647‐3W Contact NOV Contact NOV Contact NOV 203353 Contact NOV
200648‐1 10022951‐001 Tong Jaw;Lug;5.3/4"Contact NOV 7";For HT14;Assembly;PSL API 7K Contact NOV 203354 Contact NOV
200648‐3W Contact NOV Contact NOV Contact NOV 203355 Contact NOV
200650‐1 10451027‐001 Hanger, Proprietary;Assembly;Handling Tools;HT14 Contact NOV 203356 Contact NOV
200661‐1 10451029‐001 Lever;Assembly;Handling Tools;HT100 Contact NOV 203357 Contact NOV
200662‐1 10022956‐001 Tong Jaw;Hinge;8.1/2"Contact NOV 17";For HT100;Assembly;PSL API 7K Contact NOV 203359 Contact NOV
200663‐1 10022962‐001 Tong Jaw;Lug;4"Contact NOV 8.1/2";For HT100;Assembly;PSL API 7K Contact NOV 203360 Contact NOV
203344‐36 10023990‐001 Support;Hanger Assembly All HT's;Handling Tools;HT14 Contact NOV 203366 Contact NOV
203344‐48 10452268‐001 Hanger, Proprietary;Assembly, 48";Handling Tools;HT50;Also for HT200/135/100/65/55 Contact NOV 203367 Contact NOV
203438‐1 10451559‐001 Eye;Bolt, Hanger Adjustment;Handling Tools;MANUAL TONG PARTS MISC Contact NOV 203368 Contact NOV
24592‐2 Contact NOV Contact NOV Contact NOV 203369 Contact NOV
25853‐2 Contact NOV Contact NOV Contact NOV 203370 Contact NOV
26119‐1 10377708‐001 Nameplate;Type;Handling Tools;HT14;Also for HT35, Type C, F & LF manual tong Contact NOV 203371 Contact NOV
26119‐5 Contact NOV Contact NOV Contact NOV 203372 Contact NOV
26119‐6 Contact NOV Contact NOV Contact NOV 203373 Contact NOV
26119‐7 Contact NOV Contact NOV Contact NOV 203374 Contact NOV
26782‐2 Contact NOV Contact NOV Contact NOV 203375 Contact NOV
30041‐1 10377942‐001 Auxiliary Tool;Air Lift Assembly;Handling Tools;HT‐200 Contact NOV 203376 Contact NOV
30058‐1 Contact NOV Contact NOV Contact NOV 203379 Contact NOV
30064‐1 Contact NOV Contact NOV Contact NOV 203381 Contact NOV
30067‐1 Contact NOV Contact NOV Contact NOV 203388 Contact NOV
335262‐2 Contact NOV Contact NOV Contact NOV 203389 Contact NOV
9 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
50010‐52‐C8 10490362‐144 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 6.5 in;Fully Threaded;Matl SAE J429 Grade 8;Hot Contact NOV 203390 Contact NOV
Dip Galvanized (tZn);US Standard
50010‐54‐C8 10490362‐146 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 6.75 in;Fully Threaded;Matl SAE J429 Grade 8;Hot Contact NOV 203391 Contact NOV
Dip Galvanized (tZn);US Standard
50010‐60‐C8 10490362‐153 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 7.5 in;Fully Threaded;Matl SAE J429 Grade 8;Hot Contact NOV 203392 Contact NOV
Dip Galvanized (tZn);US Standard
50010‐76‐C8 10490362‐165 Screw, Cap;Hex Head;0.625‐11 UNC‐2A;L 9.5 in;Fully Threaded;Matl SAE J429 Grade 8;Hot Contact NOV 203394 Contact NOV
Dip Galvanized (tZn);US Standard
50012‐56‐C8 10490362‐329 Screw, Cap;Hex Head;0.750‐10 UNC‐2A;L 7 in;Fully Threaded;Matl SAE J429 Grade 8;Hot Dip Contact NOV 203395 Contact NOV
Galvanized (tZn);US Standard
50023‐52‐C8 Contact NOV Contact NOV Contact NOV 203396 Contact NOV
50212‐C 10490000‐080 Nut;Hex;0.750‐10 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard Contact NOV 203397 Contact NOV
50214‐C 10490000‐087 Nut;Hex;0.875‐9 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard Contact NOV 203398 Contact NOV
50312‐C 10490001‐038 Nut;Hex, Jam;0.750‐10 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard Contact NOV 203399 Contact NOV
50314‐C 10490001‐043 Nut;Hex, Jam;0.875‐9 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard Contact NOV 203400 Contact NOV
50402‐16 Contact NOV Contact NOV Contact NOV 203401 Contact NOV
50508‐C 10490003‐019 Nut;Slotted Hex;0.500‐13 UNC‐2B;Matl ASTM A563 Grade A;Plain;US Standard Contact NOV 203402 Contact NOV
50510‐C 10490003‐025 Nut;Slotted Hex;0.625‐11 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard Contact NOV 203403 Contact NOV
50512‐C 10490003‐029 Nut;Slotted Hex;0.750‐10 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard Contact NOV 2000504 Contact NOV
50514‐C 10490003‐033 Nut;Slotted Hex;0.875‐9 UNC‐2B;Matl ASTM A563 Grade A;Zinc Plated;US Standard Contact NOV 50006015 Contact NOV
50809‐N‐C 10490015‐196 Washer;Flat,Narrow;Nom Sz 0.563 in;Matl Steel;Zinc Plated;Thk 0.063 in;OD 1.125 in Contact NOV 11939‐3 Contact NOV
50810‐R‐C 10490015‐224 Washer;Flat;Nom Sz 0.625 in;Matl Steel;Zinc Plated;Thk 1 in;OD 1.75 in Contact NOV 11940‐1 Contact NOV
50912‐C 10490016‐038 Washer;Helical Spring;Nom Sz 0.750 in;Matl Steel;Zinc Plated;Regular Contact NOV 13285‐3 Contact NOV
51402‐12 10490024‐030 Pin, Cotter;Standard;Dia 0.125 in;L 1.5 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in Contact NOV 200501‐3W Contact NOV
51402‐14 10490024‐032 Pin, Cotter;Standard;Dia 0.125 in;L 1.75 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in Contact NOV 200502‐3W Contact NOV
51402‐16 10490024‐034 Pin, Cotter;Standard;Dia 0.125 in;L 2 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in Contact NOV 200504‐3W Contact NOV
51402‐6 10490024‐022 Pin, Cotter;Standard;Dia 0.125 in;L 0.75 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in Contact NOV 200506‐3W Contact NOV
51402‐8 10490024‐024 Pin, Cotter;Standard;Dia 0.125 in;L 1 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.141 in Contact NOV 200506‐SP‐M Contact NOV
51403‐24 10490024‐065 Pin, Cotter;Standard;Dia 0.188 in;L 3 in;Matl Steel;Zinc Plated;Pin Hole Size: 0.203 in Contact NOV 200507‐3W Contact NOV
51405‐16 Contact NOV Contact NOV Contact NOV 200508‐3W Contact NOV
51405‐20 10490024‐119 Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl 304 Stainless;Plain Contact NOV 200521‐3W Contact NOV
51405‐20 REPLACED 10490024‐119 Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl 304 Stainless;Plain Contact NOV 200522‐3W Contact NOV
BY P/N 51405‐24‐S
51405‐24 10490024‐118 Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl Steel;Zinc Plated Contact NOV 200524‐3W Contact NOV
51405‐24‐S 10490024‐119 Pin, Cotter;Standard;Dia 0.312 in;L 3 in;Matl 304 Stainless;Plain Contact NOV 200525‐3W Contact NOV
51435‐12 10490024‐215 Pin, Cotter;Standard;Dia 0.156 in;L 1.5 in;Matl Steel;Zinc Plated Contact NOV 200526‐3W Contact NOV
51435‐20 10490024‐223 Pin, Cotter;Standard;Dia 0.312 in;L 2.5 in;Matl 17‐4 Stainless;Zinc Plated Contact NOV 200527‐3W Contact NOV
51506‐8 10490025‐021 Pin, Grooved;G (end groove with shoulder);Dia 0.375 in;L 1 in;Matl 450 Stainless;Plain Contact NOV 200544‐4 Contact NOV
51850‐10‐C 10490005‐032 Nut;Hex Lock;0.625‐11 UNC‐2B;Matl Steel;Zinc Plated;US Standard;Nylon Insert Contact NOV 200566‐3W Contact NOV
53000‐16 10542919‐001 Pipe Fitting, Threaded;Matl Stainless;Plug,Hex Head,1.000 in,Common;Plain;NPT;304 Contact NOV 200582‐3W Contact NOV
Stainless
53301‐4‐5 10035001‐007 Screw, Drive;Round Head U;#4;L 0.313 in;Matl Steel;Plain;US Standard Contact NOV 2005831‐1 Contact NOV
56405‐40‐SHP 10490026‐062 Pin, Clevis;SAE J493 *;Dia 0.313 in;L 5 in;Through Hole;Matl Steel;Cadmium Plated;Case Contact NOV 200583‐3W Contact NOV
Hardened
59001003‐11 10469022‐001 Shackle;Chain, Bolt;Matl Alloy Steel, Forged;1.125 in;9.5 Ton;1.25 in;Hot Dipped Contact NOV 200587‐3W Contact NOV
Galvanized;Crosby/G‐2150/1019873
59001004‐11 10469023‐001 Kit;Installation;CROSBY BOLT NUT&COTTER PIN 1 1/8;Multiple Product Lines;N/A Contact NOV 200600‐6 BJHT‐50 TON HEAD ASSY, LESS LEVER & HANGER 33"
939099‐108 10462707‐001 Screw, Cap Modified;Hex Head;Drilled Shank;1.000‐8 UNC‐2A;Partially Threaded;L 3.25 Contact NOV 200602‐3W Contact NOV
in;Matl SAE J429 Grade 8
939099‐109 Contact NOV Contact NOV Contact NOV 200607‐2M Contact NOV
939099‐165 10462708‐001 Screw, Cap Modified;Hex Head;Drilled Shank;0.625‐11 UNC‐2A;Partially Threaded;L 4.75 Contact NOV 200641‐3W Contact NOV
in;Matl SAE J429 Grade 8
939099‐204 10462709‐001 Screw, Cap Modified;Hex Head;Drilled Shank;0.500‐13 UNC‐2A;Partially Threaded;L 5.75 Contact NOV 200642‐3W Contact NOV
in;Matl SAE J429 Grade 8
939099‐546 Contact NOV HEX HEAD CAP SCREW CLASS 2A Contact NOV 200644‐3W Contact NOV
939099‐556 10091584‐001 Screw, Cap Modified;Hex Head;Drilled Shank;0.750‐10 UNC‐2A;Partially Threaded;L 9 in;Matl Contact NOV 200645‐3W Contact NOV
SAE J429 Grade 8
939099‐801 10462713‐001 Screw, Cap Modified;Hex Head;Drilled Shank;0.875‐9 UNC‐2A;Partially Threaded;L 10.5 Contact NOV 200646‐3W Contact NOV
in;Matl SAE J429 Grade 8;Zinc Plated
10 / 11
PART NUMBER LIST HT‐MANUAL TONG PART NUMBER LIST HT‐MANUAL TONG
By LEGACY number By NEW number
939107‐516 10462714‐001 Screw, Cap;Square Head;0.875‐9 UNC‐2A;L 5 in;Partially Threaded;Matl SAE J429 Grade Contact NOV 200647‐3W Contact NOV
8;Zinc Plated;US Standard
939168‐96 10462716‐001 Screw, Cap;Square Head;0.750‐10 UNC‐2A;L 2.5 in;Fully Threaded;Matl (Alloy Steel);Zinc Contact NOV 200648‐3W Contact NOV
Plated;US Standard
939353‐2 Contact NOV Contact NOV Contact NOV 24592‐2 Contact NOV
939369‐17 Contact NOV Contact NOV Contact NOV 25853‐2 Contact NOV
939519‐6 Contact NOV FEMALE ROD CLEVIS *** REPLACED BY 103141‐7 ** SAME PART Contact NOV 26119‐5 Contact NOV
939521‐75 10462733‐001 Sling, Proprietary;WIRE ROPE SLING (1/2 X4FT) HT200;Handling Tools;HT200 Contact NOV 26119‐6 Contact NOV
939537‐74 Contact NOV Contact NOV Contact NOV 26119‐7 Contact NOV
940093‐3 REPLACED 10490096‐007 Pipe Fitting, Threaded;Matl Iron,Cast;Elbow,90? Street,0.375 Contact NOV 26782‐2 Contact NOV
BY 52406‐B in,Common;Black;NPT;Malleable, Short
940102‐19 Contact NOV Contact NOV Contact NOV 30058‐1 Contact NOV
940212‐9 Contact NOV Contact NOV Contact NOV 30064‐1 Contact NOV
940968‐3 Contact NOV Hex Socket Pipe Plug 3/8 Contact NOV 30067‐1 Contact NOV
941091‐3 10464778‐001 Shackle;Anchor, Screw Pin;Matl Alloy Steel, Forged;0.625 in;3.25 Ton;0.75 in;Hot Dipped Contact NOV 335262‐2 Contact NOV
Galvanized;Crosby/G‐209/1018473
941271‐751 Contact NOV Contact NOV Contact NOV 50023‐52‐C8 Contact NOV
941286‐936 Contact NOV Contact NOV Contact NOV 50402‐16 Contact NOV
941482‐18 10464788‐001 ETN;90 DEG. ELBOW, MALE TO MALE;AEROQUIP/2003‐6‐8‐B Contact NOV 51405‐16 Contact NOV
941854‐3 Contact NOV PIPE NIPPLE; 1" X 3" LG. S.S. Contact NOV 939099‐109 Contact NOV
943963‐6 Contact NOV Contact NOV Contact NOV 939099‐546 HEX HEAD CAP SCREW CLASS 2A
943991‐1 10464873‐001 Valve, Control;Directional;Conn 1 Straight Female NPTFContact NOV6;Conn 2 Straight Female Contact NOV 939353‐2 Contact NOV
NPTFContact NOV6;Matl Brass;Max 200 psi;Not Certified;Spring Centered
944423‐16 10464884‐001 Nut;Lock,Flex‐top;1.000‐8 UNC‐2B;Matl Steel;Cadmium Plated Contact NOV 939519‐6 FEMALE ROD CLEVIS *** REPLACED BY 103141‐7 ** SAME PART
946281‐16 USE 56501‐ 10490140‐160 ADAPTER (2);CONNECTOR;0.375‐18 MNPT;MALE SAE/JIC 37?Contact NOV6;MATL STEEL;ZINC Contact NOV 939537‐74 Contact NOV
6‐6‐S PLATED
946301‐16 REPLACED 10490142‐105 ADAPTER (2);ELBOW,90?;0.375‐18 MNPT;MALE SAE/JIC 37?Contact NOV6;MATL Contact NOV 940102‐19 Contact NOV
BY 56506‐6‐6‐S STEEL;PLAIN;TUBE O.D. 0.375
947129‐194 10467035‐001 Pin, Roll;Spiral;Dia 0.375 in;L 1.5 in;Matl Steel;Plain Contact NOV 940212‐9 Contact NOV
948033‐5 10467069‐001 Shackle;Eye and Eye Swivel;Matl Forged Steel;0.625 in;2 Tons;Galvanized;H 5.875 in x W Contact NOV 940968‐3 Hex Socket Pipe Plug 3/8
3.063 in x 0.782 in Thk
950152‐819 10467114‐001 Hose Assembly, SAE Hydraulic;‐6;100R6;L 120 in;Crimp,Non‐Skive;Conn 1 Straight Female Contact NOV 941271‐751 Contact NOV
SAE/JIC 37? SwivelContact NOV6;Conn 2 Straight Female SAE/JIC 37? SwivelContact NOV6
950172‐1900 Contact NOV Contact NOV Contact NOV 941286‐936 Contact NOV
950502‐4 10467134‐001 Filter;Noise;0.500 in MNPT;Quiet Flow Muffler Filter, HT200;40 Micron;Sintered Bronze;Pipe Contact NOV 941854‐3 PIPE NIPPLE; 1" X 3" LG. S.S.
Threaded;ARROW/ASP‐4
BJ12863 10460928‐001 Ring, Proprietary;SUSPENSION RING ALL HT‐TONGS;Handling Tools;MANUAL TONG PARTS Contact NOV 943963‐6 Contact NOV
MISC
BJ17194 10460929‐001 Pin, Proprietary;Die Retainer for Manual Tongs;Dia 0.375 in;L 0.75 in;Handling Contact NOV 950172‐1900 Contact NOV
Tools;MANUAL TONG PARTS MISC;Matl AISI 1020 HR;Phosphate
11 / 11