Professional Documents
Culture Documents
PPTP Eng v8.23 - Translation
PPTP Eng v8.23 - Translation
Added Features
Any and all VoIP products of AddPac Technology support this feature.
Network Configuration
Related Commands
If you set the parameters to the above values, you could perform settings as follows:
PPTP
mode.
5 (config-ether0.0)# pptp ip remote 192.168.2.200 Sets the IP address of the PPTP server.
6 (config-ether0.0)# pptp route data Sets this feature if you want to transfer data
7 (config-ether0.0)# ppp authentication chap callin Sets the PPP authentication method to
8 (config-ether0.0)# ppp chap hostname addpac Sets the user ID of Chap to “addpac”.
9 (config-ether0.0)# ppp chap password 1234 Sets the password of Chap to “1234”.
11 (config-ether0.0)# no ppp ipcp default-route Disables the setting that allows you to
mode.
14 (config-pptp0)# ip address 192.168.70.50 Sets the public IP address. (real WAN, not
16 (config)#route 0.0.0.0 0.0.0.0 192.168.70.1 Sets the IP address of the default router
18 (config)# ip-policy ip host voip-interface any route- Allows you to transfer data to a public
VPN (Optional).
Disabling PPTP
Note: MS-Chap, which is one of the PPP authentication methods, is not supported.
• Configration Example
version 8.22p1
hostname AP200
ip-share enable
interface ether0.0
no ip address
encapsulation ppp-pptp
interface ether1.0
no ip address
ip dhcp-group 0
interface pptp0
• Example of Use 2 (Only VoIP traffic is sent to the PPTP interface – IP Share)
• Configration Example
version 8.22p1
hostname AP200
ip-share enable
interface ether0.0
no ip address
encapsulation ppp-pptp
interface ether1.0
no ip address
ip dhcp-group 0
interface pptp0
Example of Use 3 (Only VoIP traffic is sent to the PPTP interface – for PAT Use)
• Configration Example
version 8.234
hostname AP200
no ip-share enable
ip-share interface net-side ether0.0
no ip address
encapsulation ppp-pptp
no ppp ipcp default-route Å Does not receive information on default routing from PPTP Server.
!
interface ether1.0
ip nat-group 1 pat pptp0 Å Has been translated into the IP address (public) of the pptp0 interface.
ip dhcp-group 0
!
no ip address
encapsulation pppoe
ppp ipcp default-route Å Receives information on default routing from a public network.
!
<- Transmits the IP address of the VoIP interface (VoIP traffic) to ether0.0 (PPTP network).