SMC 104 E at - 5

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Sabroe

Refrigeration Plant Computation


Version 33.00-2020/05/12

Customer : GENERIC USER LEVEL 4 Customer ref. :


Project : Dummy Prepared by : JDOE
Date : 2023/08/17 Time : 15.06.20 page 1 of 4

SINGLE STAGE COMPRESSOR

Compressor Oil separator


type SMC 104 E oil seperator OHUR 3209
number of compressors 1. oil charge 0.00 litre
refrigerant R717
compressor load 100.0 % Motor
drive shaft speed 1470.0 RPM type
number of working 4/ 4 capacity 132.0 kW
cylinders voltage 400. V
drive type direct frequency 50. Hz
suction line loss 0.50 K protection class IP23
discharge line loss 0.50 K IEC 280S/M
evaporating temp. -5.0 deg.C start-up
condensing temp. 40.0 deg.C motor eff. 0.00
suction line superheat 0.00 K motor line power 0.0 kW
total suction superheat 0.00 K consumption
condenser liquid 0.00 K
subcooling
total liquid subcooling 0.00 K
total cooling capacity 232.4 kW
total heating capacity 290.7 kW
total shaft power 62.7 kW
required
drive shaft torque 407. Nm
cooling capacity/shaft 3.71
power ratio
cooling capacity/line 0.00
power ratio
equipment for head water or thermo pump
cooling
equipment for oil same as head cooling
cooling

HP compressor - Warnings:
NB: no starting torque check - motor data not available !
NB: please notice min. load discharge temperature (max 150 deg.C)
NB: Compressor weight incorrect - data missing.
NB: All data valid for fixed speed drive only !
NB: design limits check OK
The tolerance of all performance data issued for the products is according to EN-12900.
Measurement tolerances according to EN13771.
Data subject to change without notice.
Sabroe
Refrigeration Plant Computation
Version 33.00-2020/05/12

Customer : GENERIC USER LEVEL 4 Customer ref. :


Project : Dummy Prepared by : JDOE
Date : 2023/08/17 Time : 15.06.20 page 2 of 4

SINGLE STAGE COMPRESSOR

Operating conditions
suction pressure 3.48 bar_a
suction temperature -5.5 deg.C
suction specific volume 0.3528 m3/kg
enthalpy difference 1068.40 kJ/kg
(ref)
suction-side massflow 0.2175 kg/s
swept volume 332.51 m3/h
discharge pressure 15.77 bar_a
discharge temperature 122.2 deg.C
discharge temperature 155.4 deg.C
at min load
discharge specific 0.1155 m3/kg
volume
condenser subc. liq. 579.5 kg/m3
density
evaporator sat. liq. 645.4 kg/m3
density
pressure ratio (p2/p1) 4.53
cover cooling water 0.34 m3/h
flow
Sabroe
Refrigeration Plant Computation
Version 33.00-2020/05/12

Customer : GENERIC USER LEVEL 4 Customer ref. :


Project : Dummy Prepared by : JDOE
Date : 2023/08/17 Time : 15.06.20 page 3 of 4

SOUND DATA

Noise data - one compressor block


---------------------------------
Sound Power: 96.2 +/- 3 dB(A) re 10E-12 Watt
Mean Sound Press.: 80.5 +/- 3 dB(A) re 2E-5 N/m2
Free field over reflecting plane, dist. = 1 m
Ref. surface: L= 1.2 W= 1.1 H= 1.2 m
Frequency Total Sound Power Total Mean S. Pr.
. Hz dB dB
63 86.3 70.6
125 91.3 75.6
250 91.6 75.8
500 90.9 75.1
1k 92.9 77.2
2k 88.3 72.6
4k 85.8 70.0
8k 77.8 62.0
dB(L) 98.8 83.0
dB(A) 96.2 80.5
Sabroe
Refrigeration Plant Computation
Version 33.00-2020/05/12

Customer : GENERIC USER LEVEL 4 Customer ref. :


Project : Dummy Prepared by : JDOE
Date : 2023/08/17 Time : 15.06.20 page 4 of 4

PLANT DATA

plant load percentage 100.0 %


plant cooling capacity 232.4 kW
plant heating capacity 290.7 kW
total shaft power 62.7 kW
consumption
total line power 0.0 kW
consumption
shaft cooling power 3.71
ratio
shaft heating power 4.64
ratio
line cooling power 0.00
ratio
line heating power ratio 0.00

You might also like