Professional Documents
Culture Documents
Script FINALDEFENSE
Script FINALDEFENSE
Bladeless Wind Turbine is placed, the main part of the system being the mast is
the one that catches the wind. Inside this mast are the stator and permanent
magnet that utilizes the mechanical energy obtained from the wind energy and
converts it into electrical energy. Another proposed design is a stick-like shape
Vortex Bladeless Wind Turbine, the only difference between the two is the
platform that serves as a better support for the system.
Moving on, for chapter 3 the researchers interpreted and discussed the data
gathered from the experiments and surveys conducted.
As for the Design and Development of Vortex Bladeless Wind Turbine with
Automatic Control System,
With the help of the data gathered by the researchers and consultation from the
fabricators, the proponents were able to come up with the final design of the
Vortex Bladeless Wind Turbine with Automatic Control System. First let us look at
the isometric view of the system, the system having a 154cm as its height,
composes of two parts. The upper part composed of the 102cm long mast which
harnesses wind energy and converts it into electrical energy. Found also inside
the mast are the wind generator, round bar that supports the mast and a set of
springs that are controlled by the actuator that serves as the control system of the
prototype. On the other hand, the lower part which is 52cm long is composed of
the 12V 4A battery that serves as the energy storage of the system. All of these
are placed on a 50x50 cm platform.
Next is the Front and Top View of the system, found also at the top of the system
is a micro wind turbine that will serve as the sensor of that is used to determine
the wind speed experienced by the prototype. Based on the wind speed
measured, the actuator will automatically adjust to a maximum of 2 inches. With
this, it will help the prototype’s movement to be stable during any wind speed. In
addition, a control box having a dimension of 20x25.5cm is placed where the USB
charging ports are positioned. The box can also serve as a pad where the
consumers can place their devices while charging.
Wind
Actual Output
Test Time Speed Expected Output Remarks
(%)
(m/s)