Professional Documents
Culture Documents
Conplast P211
Conplast P211
Conplast P211
Conplast P211 conforms with BS 5075, BS:EN934-2 and with Appearance : Dark Brown Liquid
ASTM C494 as Type A . Specific gravity : 1.16 ± 0.03 at 25°C
Chloride content : Nil to BS:EN934-2
Description
Instructions for use
Conplast P211 is a chloride free water reducing admixture
based on selected sugar-reduced lignosulphonates. It is sup- Mix design
plied as a brown solution which instantly disperses in water. Where the main requirement is to improve strengths, initial
Conplast P211 disperses the fine particles in the concrete mix, trials should be made with normal concrete mix designs. The
enabling the water content of the concrete to perform more addition of the admixture will allow the removal of water from
effectively and improving the consistency of the concrete. This the mix whilst maintaining workability. After initial trials, minor
produces higher levels of workability for the same water con- modifications to the overall mix design may be made to opti-
tent, allowing benefits such as water reduction and increased mise performance.
strengths to be taken. Where the main requirement is to provide high workability
concrete, the mix design should be one suitable for use as a
Technical support pump mix. Advice on mix design for flowing concrete is avail-
Fosroc provides a technical advisory service for on-site assis- able from Fosroc.
tance and advice on mix design, admixture selection, evalua-
tion trials and dispensing equipment.
Conplast P211
Fosroc® Conplast® P211
Compatibility
Storage
Conplast P 211 is suitable for use with all types concrete Conplast P211 has a minimum shelf life of 12 months provid-
mixes produced with Portland Cements (OPC) and mixes ed the temperature is kept within the range of 5°C to 50°C.
with cement replacement materials such as PFA, GGBFS, Should the temperature of the product fall outside this range
SRC cements or microsilica. then contact Fosroc for advice.
Conplast P 211 should not be used in combination with any Freezing point: Approximately -3°C
other admixture unless prior approval is obtained from your
local Fosroc office. Precautions
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the latest version.
Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
Al Gurg Fosroc LLC
Regional offices
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
United Arab Emirates Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
www.fosroc.com
UAE/0003/18/K