Instructions by supervisor should be___1.Clear 2.Simple 3.On time c 1 3(R) 4.Specific a) 1,2 correct, 3,4 wrong b) 1 2 wrong, 3 4 correct c) All correct d) All wrong 2 3(R) ______ are the benefits to supervisor of understanding team. a a) a)To take perfect decision b) Promotion c) Status d) Increments Decision can be elaborated by ------------------- d 3 3(U) a) By written document b) By conducting meeting c) By counseling d) All of the above Instructions by supervisor should be___1.Clear 2.Simple 3.On time c 4 3(R) 4.Specific a) 1,2 correct, 3,4 wrong b) 1 2 wrong, 3 4 correct c) All correct d) All wrong The worker is appreciated by general manager through promotion to a 5 3(R) supervisor it is the example of ____ motivation Non-financial b) Financial c) Both a and b d) None of the above ____ is chronology of steps in control process b 6 3(U) 1. Setting performance 2. Comparing actual performance 3. Taking corrective actions 4. Measurement of actual performance a) 1-4-2-3 b) 1-2-4-3 c) 1-3-2-4 d) 2-1-4-3 _____ is the example communication of upward communication c 7 3(U) a) Supervisor to supervisor b)Supervisor to Worker c)Supervisor to manager d) manager to manager 8 3(U) _____ is the example of Grapevine or informal communication a a)Whispers/Rumors b) Orders for job c) Notes d) Memos Decision can be elaborated by ------------------- d 9 3(R) a) By written document b) By conducting meeting c) By counseling d) All of the above The Worker is not performed as per orders of supervisor, he is punished b 10 3(U) and warned to improve his performance it is example of _____ a)Positive motivation b) Negative motivation c) Both a and B d) None of above _____ is the example communication of upward communication c 11 3(U) b) Supervisor to supervisor b)Supervisor to Worker c)Supervisor to manager d) manager to manager Select technique for determination of probable profits and losses at b 12 3(U) organization a) Budgetary control b)Breakeven analysis c) Personal observation d) Statistical reports Industrial safety management if that branch of management which is d 13 3(A) concerned with ______ hazards from the industries. a) Reducing b)Controlling c)Eliminating d) All of the above c 14 3(A) Class A fire is related to fire hazards of Electrical devices b) Oil/Chemicals c) Wood/Cloth d) Combustible metals 15 3(A) Break even analysis shows ______ point on graph b a)No loss only profit b) No loss No profit c) Only profit d) Only loss Industrial safety management if that branch of management which is d 16 4(R) concerned with ______ hazards from the industries. a) Reducing b)Controlling c)Eliminating d) All of the above Identify correct pair of PPE b 17 4(R) a)Head protection – Face shield b) Face protection- Safety goggles c)Hearing protection- Air plugs d) Skin/body protection- boiler suit The Worker is not performed as per orders of supervisor, he is punished b 18 3(A) and warned to improve his performance it is example of _____ a)Positive motivation b) Negative motivation c) Both a and B d) None of above To reduce danger, inflammable materials should be kept away from d 19 3(A) general storage at a safe distance of ____a)20.20 m b) 15.25 m c) 25.15 m d) 15.15 m The operator is handling press machine and subjected to accident caused a 21 4(R) death , it is ____________ type of accident a)Fatal b) Major c) Reportable d) Internal Identify incorrect pair of fire and its class c 22 4(U) a)Wood-class A b) Chemicals-Class B c) Electrical hazards- Class D d) Combustible metals- Class D The electrical technician is subjected to injury due to high tension electrical c 23 4(R) power cable, it is _________ hazard. a)Radiation burn b)Deep Burns c) Arc burns d)Necrosis Identify incorrect pair of PPE b 24 4(U) a)Head protection – Helmet b) Face protection- Face shield c)Hearing protection- Gloves d) Skin/body protection- boiler suit The electric motor manufacturing unit is having fire hazard due to a 25 4(U) electrical short circuit , select type of extinguisher a)Dry chemical powder b) water c) Chemical foam d) Sand buckets The operator is handling press machine and subjected to accident caused b 26 4(A) minor crack to bone, it is ____________ type of accident a)Fatal b) Major c) Reportable d) Internal Choose the correct objective of the Industrial Factory Act. a a. To primarily focuses on health, safety, the welfare of factory workers, working hours, the minimum age to work, leave with pay, etc. b. To promote measures for securing and preserving good relations between the 27 4(A) employers and the employees c. To provide relief to workmen in matters of lay - offs,retrenchment, wrongful dismissals d. All of the above 28 4(U) To reduce danger, inflammable materials should be kept away from general b storage at a safe distance of _____20.20 m b) 15.25 m c) 25.15 m d) 15.15 m The operator is handling press machine and subjected to accident caused a 29 4(A) death , it is ____________ type of accident a)Fatal b) Major c) Reportable d) Internal Power has been given to _______________ to require Works Committee to a 30 4(A) be constituted in every industrial establishment employing 100 workmen or more. a. Appropriate Government b. State Government c. High Court d. Board of Conciliation The electric motor manufacturing unit is having fire hazard due to a 31 4(A) electrical short circuit , select type of extinguisher a)Dry chemical powder b) water c) Chemical foam d) Sand buckets ______ days in advance does the occupier of a factory premises gives notice c 32 4(A) of occupancy to the chief inspector. a. 15 days b. 20 days c. 10 days d. 25 days The ____ is conducted by safety officer for evacuation practice by the b 33 4(A) employees in possible case of fire hazard due to short circuit. a)Fire show b) Fire drill c) Fire permit d) All of the above If there are ____ numbers of employees, then the employer has to provide a b 34 5(R) canteen. a. 250 b. 510 c. 320 d. 100 b 35 5(R) If death occurs due to injury, the amount of compensation to the employee is equal to__________ of monthly wages multiplied by relevant factor a)50% b) 100% c)40% d) 60% __________ workmen is under the influence of drug and claimed c compensation he will get a)20% monthly wages multiplied by relevant factor 36 5(A) b) 30% monthly wages multiplied by relevant factor c) No compensation to be paid d) 10 %monthly wages multiplied by relevant factor 38 5(U) ______many hours in a week can an adult work as per factories act? d a. 9 hours b. 56 hours c. 34 hoursd. 48 hours If death occurs due to injury, the amount of compensation to the employee b 39 5(A) is equal to__________ of monthly wages multiplied by relevant factor a)50% b) 100% c)40% d) 60% 40 5(U) If there are ____ numbers of employees, then the employer has to provide a b canteen. a. 250 b. 510 c. 320 d. 100 _________much compensation does the workman deserve at the time of a retrenchment? 41 5(A) a. Equivalent to 15 days average pay b. 6 months c. Equivalent to 30 days average pay d. None of the above
If loss of both eyes due to injury at welding of ship , the amount of b
compensation to the employee is equal to__________ of monthly wages 42 5(U) multiplied by relevant factor a)50% b) 100% c)40% d) 60