Professional Documents
Culture Documents
IM01.05.en-General Information
IM01.05.en-General Information
IM 01.05
IMPORTANT
It is mandatory to follow the safety manual
IM 01.05
Maintenance Instruction Manual
General information Page 1/2
Unless otherwise specified in the contract, "The Central Motor Vehicles Rules, 1989" apply for
deliveries within India and "General Conditions of Motor Vehicle Act" apply for deliveries to other
countries.
The person who carries out maintenance work on this machine must be well acquainted with its
design.
The person who is responsible for the operation of the machine must have good knowledge of the
machine and must know when and how adjustments should be made. He must also be familiar with
the machine's permissible load limits.
For this reason you should read carefully through this maintenance instruction manual and study the
spare parts list and the drawings included therein before you install or operate the machine. In
addition, make sure that the operator responsible for the machine has a copy of this manual.
It is especially important to read the safety regulations included in the instruction manual.
Guarantee policy
In addition to the information given in the general delivery conditions, we should like to point out
the following:
Sandvik undertakes to correct faults in machines sold by us, under the condition that:
the fault is reported to Sandvik' representatives within the applicable guarantee period.
the machine is used only in accordance with the operating conditions specified by us and
in applications for which it is intended.
maintenance work and repairs are carried out by competent service personnel, in
accordance with Sandvik's recommendations.
Our obligation thus does not cover faults caused by the use of non-genuine parts, inadequate
maintenance, incorrect installation, incorrect operation, incorrectly carried out repairs or normal
wear.
Sandvik takes no responsibility for damage beyond what is mentioned above - neither injuries to
people, damage to property or consequential damages.
We reserve the right to alter the design and specifications of our products without prior notice.
In order to achieve optimal reliability and operating economics throughout the entire life of the
machine, only genuine Sandvik original parts may be used.
The use of genuine Sandvik parts automatically gives access to the development and quality
advances constantly made by Sandvik.
Sandvik guarantees that spare parts will be available for at least 10 years after the cessation of
manufacture of the machine in question.
To ensure that spare parts deliveries are correct, consult the applicable spare parts list and with all
orders, specify the following:
* machine type
* serial number/SW-number
* description, part number and quantity required.
4. Service assistance