Standalone G-Force High Resolution GuardianTM Stabilization
Sensors! Standalone Altimeter V4! for the OSD Pro!
We are pleased to announce our
Need to know how many G's you Altimeter MicroSensor V4. It is a pulled in that last barrel roll? Eagle Feather-light, low cost, and about step up from our Altimeter V3, with Tree is pleased to offer the world's the size of a postage stamp, the much higher resolution (+/- 1 foot) first standalone G-Force meters for inertial sensor based Guardian and improved stability through RC models. stabilization expander provides changing temperatures. world class stabilization to your The tiny, low cost sensors fixed wing or elevon model (OSD The Altimeter V4 has two modes: it measure G's in the X, Y, and Z Pro/eLogger and FPV equipment works standalone with no additional axes during flight, and the required). It’s a “Guardian Eagle” equipment required, as well as being maximum encountered forces on for your plane! fully compatible with our eLogger each axis (in 10ths of G's) are V4/V3, OSD Pro, and PowerPanel displayed on the built-in 7 segment To stabilize your model, just mount LCD products. LED. the Guardian in a level orientation, plug it into your OSD Pro, do some In standalone mode, when you land, Of course, the G-Force minimal setup, and away you your maximum altitude will display Microsensors are fully compatible go. Many advanced features are on the built-in 7 segment LED. For with our eLogger V3/V4 and OSD also supported. example, if you flew to 281 feet, the Pro products, and provide real-time unit will display “2 – 8 - 1” logging, display and graphing of of Stabilization gain can be controlled repeatedly. No configuration, the G-force data when used with via an extra knob on your radio (via additional equipment, or computer these products. the OSD Pro’s Aux2 port), so you required! can tune or turn off stabilization as Each unit is factory calibrated, with you fly! Or, connect your Altimeter V4 to any no user calibration required. You of our eLogger products for full can even use the G-Force The Guardian also provides an display, logging and graphing of your MicroSensors in your own Artificial Horizon Indicator (AHI) on flight’s speed or altitude! You can Firmware/Microcontroller project. your OSD Pro screen, and supports even use the Altimeter V4 your own both standard and elevon fixed Firmware/Microcontroller project. There are two models available: wing models. The Altimeter V4 (p/n ALTIMETER- * 3-Axis G-Force Microsensor, up to The Guardian (p/n GUARDIAN- V4) has the same low price as the 8 g (7 g minimum) (MSRP $26.99 EXP) is MSRP $54.99 USD. altimeter V3 ($37.99 USD, MSRP). USD, p/n GFORCE-LOW) Please click here for more Please click here for more * 3-Axis G-Force Microsensor, up to information! information! 40 g (38 g minimum) in X and Y axes, and up to 8 g (7 g minimum) in Z axis (MSRP $63.99 USD, p/n GFORCE-HIGH)
Please click here for more
information!
Disclaimers: All specifications and prices subject to change without notice. Not responsible for errors in content.
Id Questio N A Graph Is A Set of - and Set of - A Vertices, Edges B Variables, Values C Vertices, Distances D Variable, Equation Answer A Marks 1 Unit 1