Professional Documents
Culture Documents
Water Pump - Remove (KENR6052-23)
Water Pump - Remove (KENR6052-23)
Removal ProcedurePP
W-
Table 1 202 C7E
4 /0 55F
09:
Required Tools
4 /2 9 E
13:
Tool Part Number Part Description Qty 2
KE 10+
A 138-7573
NR
Link Bracket
08: 1
©2 605 00
024 2
NOTICE
Cat
erp
Care must be taken to ensure that fluids are contained during
illa
performance of inspection, maintenance, testing, adjusting, and
r In
repair of the product. Be prepared to collect the fluid with
suitable containers before opening any compartment or
c.
disassembling any component containing fluids.
1. Drain the coolant from the cooling system into a suitable container for storage
or for disposal. Refer to Operation and Maintenance Manual, "Cooling
System Coolant - Change".
:
PPW
202 -C7E
4 /0 55F
09: 4 9E
13: /22
KE 10+
NR 08:
©2 605 00
Illustration 1
024 2 g01323569
Cat
2. Remove bolts (3). Remove elbow (4). Remove the O-ring seal from elbow (4).
erp
illa
3. Remove bolts (6). Disconnect elbow (7). Remove the O-ring seal.
r In
4. Use Tooling (A) and attach a suitable lifting device onto water pump (1). The
c.
weight of water pump (1) is approximately 44 kg (97 lb). Disconnect hose
assembly (2). Remove bolts (5) and remove water pump (1).
PPW-C7E55F9E
2024/04/22
09:13:03+08:00
i02636698
© 2024 Caterpillar Inc.
: