Professional Documents
Culture Documents
Acs355 - PLCS - Net - Interactive Q & A
Acs355 - PLCS - Net - Interactive Q & A
Home ! Forums ! PLCS.net - Interactive Q & A ! LIVE PLC Questions And Answers !
Acs355
$ salem_gsm · % May 9, 2016
" Reply
" Reply
May 10, 2016 & #3
salem_gsm
Member thanks bro but problem now is that the drive not enter menu i
can do any think i have error A5001 how can i solve this problem
P
S
O
?
https://library.e.abb.com/public/8f0f44a0024e41d2985abc2c4dca9d3c
/ACS355-UM_revC_screen_A5.pdf
" Reply
Sep 10, 2016 & #5
RussB
Lifetime Supporting Member
myawinnn said: '
Dear Friends,
Anyone who knows ACS355 VFD RJ45 PINOUT(All pin
assignment),please kindly share.
I will like to test ACS-CP-A assistant control panel without connected
to Drive.Because,the control panel is showing unknown drive when I
Join Date: Oct 2003 connected to VFD via panel connector.
Location: Michigan
Thanks
Posts: 2,914
Which port are you looking for information on? The OP has the
correct pin out for the port used by the Key Pad and to connect
Drive Window Lite via a computer.
" Reply
Which port are you looking for information on? The OP has the correct
pin out for the port used by the Key Pad and to connect Drive Window
Lite via a computer.
" Reply
Sep 11, 2016 & #7
RussB
Lifetime Supporting Member The ONLY on board RJ-45 port on an ACS355 is RS-232 and the
connections to it are in the first post of this thread.
For anything else you need to add an option module and each
has a document detailing its wiring. What is the part number of
your option module?
" Reply
Sep 11, 2016 & #8
myawinnn
Member Dear Friend,
I know that, can be found in manual book.
M 1 - Transmit
3 - Receive
2 & 6 - Ground
I don't want to add other modules.
Join Date: Sep 2016
The other pins of onboard RJ45 port should be used to connect
Location: Yangon
Posts: 4 with ACS-CP-A/ACS-CP-D/ACS-CP-C.
There are 6 pins using to connect with control panel via panel
connector.(1,2,3,6,7&8)
May I know Which PINs were used to give power supply to
control panel and what is the supply voltage?(ACS-CP-A/ACS-
CP-D/ACS-CP-C).
If you have ACS355,easy to check. Power up and check all pins
output.
I didn't bring ACS355 VFD with me, that's why I'm asking for
help.
Thanks
[
QUOTE=RussB;706080]The ONLY on board RJ-45 port on an
ACS355 is RS-232 and the connections to it are in the first post
of this thread.
For anything else you need to add an option module and each
has a document detailing its wiring. What is the part number of
your option module?
" Reply
Sep 12, 2016 & #9
myawinnn
Member Dear Friend,
I know that, can be found in manual book.
M 1 - Transmit
3 - Receive
2 & 6 - Ground
I don't want to add other modules.
Join Date: Sep 2016
The other pins of onboard RJ45 port should be used to connect
Location: Yangon
Posts: 4 with ACS-CP-A/ACS-CP-D/ACS-CP-C.
There are 6 pins using to connect with control panel via panel
connector.(1,2,3,6,7&8)
May I know Which PINs were used to give power supply to
control panel and what is the supply voltage?(ACS-CP-A/ACS-
CP-D/ACS-CP-C).
If you have ACS355,easy to check. Power up and check all pins
output.
I didn't bring ACS355 VFD with me, that's why I'm asking for
help.
Thanks
" Reply
? 4 5 6 7 9 : 9 8
Similar Topics
Share: ! " # $ % ; 4
Home ! Forums ! PLCS.net - Interactive Q & A ! LIVE PLC Questions And Answers !
You are not registered yet... Please click here to register now and access all the forums FREE
features!!