Professional Documents
Culture Documents
LCD1602 Black
LCD1602 Black
SPECIFICATION FOR
APPROVAL
Customer:
Customer Part No.:
Date:
APPOVED SIGNATURES
BLUE MOON Customer
1
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
1 . REVISION RECORD
2. GENERAL SPECIFICATION
3. OUTLINE DEMENSION:
4. BLOCK DIAGRAM
6.ELECTRICAL CHARACTERISTICS
8.PIN ASSIGNMENT
9.MPU INTERFACE
12.OPTICAL CHARACTERISTICS
14.APPLICATION EXAMPLE
15. PRECAUTION FOR USING LCM
2
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
1 . REVISION RECORD
3
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
2.GENERAL SPECIFICATION
Interface with 4-bit or 8-bit MPU (directly connected M6800 serial MPU)
Display Specification
Display Character: 16 character X 2 line Character Font:5X8dors+cursor
Character Generator ROM (CGROM): 8320 bits (192 characterX5X8 dots) &(32
characterX5X10 dots)
Weight: g
POWER: +5V
4
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
3. OUTLINE DEMENSION:
4. BLOCK DIAGRAM:
5
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
8. Pin assignment
Pin NO. Symbol Function Remark
1 Vss 0V
2 Vdd Power Supply +5V
3 Vo For LCD Variable
4 RS Register Select (H: Data L: Instruction)
5 R/W L: MPU to LCM H: LCM to MPU
6 E Enable
7 DB0 Data Bit 0
8 DB1 Data Bit 1
9 DB2 Data Bit 2
10 DB3 Data Bit 3
11 DB4 Data Bit 4
12 DB5 Data Bit 5
13 DB6 Data Bit 6
14 DB7 Data Bit 7
15 A Anode of LED Unit
16 K Cathode of LED Unit
6
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
IC Specifications
See The Reference of Sunplus Data Book-----SPLC780D
Timing diagram
VIH1 VIH1
E VIL1 VIL1
VIH1 VIH1
R/W
VIL1 VIL1
VIH1 VIH1
RS
VIL1 VIL1
7
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
Display position 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10
DDRAM address 00 01 02 03 04 05 06 07 08 09
DDRAM address 0A 0B 0C 0D 0E 0F
Display position 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10
DDRAM address 40 41 42 43 44 45 46 47 48 49
DDRAM address 4A 4B 4C 4D 4E 4F
-1 means first character of line 1 on screen
8
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
Instruction Description
Clear Display
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0 0 0 0 0 0 0 0 0 1
Clear all the display data by writing “20H” (space code) to all DDRAM address, and set DDRAM
address to “00H” into AC(address counter).Return cursor to the original status, namely, bring the
cursor to the left edge on the first line of the display. Make the entry mode increment(I/D=HIGH)
Return Home
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0 0 0 0 0 0 0 0 1 -
Set DDRAM address to “00H” into the address counter. Return cursor to its original site and return
display to its original status, if shifted. Contents of DDRAM do not change.
9
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
Entry Mode Set
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0 0 0 0 0 0 0 1 I/D SH
Set the moving direction of cursor and display.
I/D: Increment/decrement of DDRAM address (cursor or blink)
When I/D=High, cursor/blink moves to right and DDRAM address is increased by 1.
When I/D=low, cursor/blink moves to left and DDRAM address is decreased by 1.
*CGRAM operates the same as DDRAM, when reading from or writing to CGRAM.
SH: Shift of entire display
When DDRAM read (CGRAM read/write) operation or SH=”Low”, shifting of entire display is not
performed. If SH=High, and DDRAM write operation, shift of entire display is performed according to
I/D value(I/D=High, shift left, I/D=Low, shift right).
Function set
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0 0 0 0 1 DL N F - -
DL: Interface data length control bit
When DL=High, it means 8-bit bus mode with MPU.
When DL=Low, it means 4-bit bus mode with MPU. When 4-bit bus mode, it needs to transfer 4-bit
data twice.
N: Display line number control bit
When N=Low, 1-line display mode is set.
10
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
When N=High,2-line display mode is set.
F: Display font type control bit
When F=Low, 5X8 dots format display mode is set .
When F=High, 5X11 dots format display mode.
Note:
In case of RAM write operation, AC is increased/decreased by 1 as in read operation. At this time, AC
11
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
indicates the next address position, but only the previous data can be read by the read instruction.
0 0 0 0 x 1 1 1 0 0 0 0 0 0 x x x 0 1 1 1 0 Pattern8
0 0 1 x x x 1 0 0 0 1
0 1 0 x x x 1 0 0 0 1
0 1 1 x x x 1 1 1 1 1
1 0 0 x x x 1 0 0 0 1
1 0 1 x x x 1 0 0 0 1
1 1 0 x x x 1 0 0 0 1
1 1 1 x x x 0 0 0 0 0
MSB LSB
AC6 AC5 AC4 AC3 AC2 AC1 AC0
12
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
[8-Bit Interface]
Power on
Wait time>40ms
Wait time > 15ms
After VDD>2.7V
after VDD>4.5V
RS R/W DB7 DB6 DB5 DB4 DB3 DB3 DB1 DB0 BF cannot be checked before this instruction
0 0 0 0 1 1 X X X X
0 0 0 0 1 1 X X X X
Function set(Interface is 8 bits length.)
0 0 0 0 1 1 X X X X
Function set(Interface is 8 bits length.)
Display clear
13
PDF 文件使用 "pdfFactory Pro" 试用版本创建 ÿwww.fineprint.com.cn
C1602A-YFDN-DYNC
[4-Bit Interface]
Power On
Wait time>40ms
Wait time > 15ms
After VDD>2.7V
after VDD>4.5V
0 0 0 0 1 1
Function set(Interface is 8 bits length.)
0 0 0 0 1 1
Function set(Interface is 8 bits length.)
Display off
Initialization Ends
Display clear
Entry mode set
14
PDF 文件使用 "pdfFactory Pro" 试用版本创建 ÿwww.fineprint.com.cn
C1602A-YFDN-DYNC
12.OPTICAL CHARACTERISTICS:
Φ
Φ
(3)Response Time:
Response time is measured as the shortest period of possible between the change in
15
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
0 T
Brightness
10%
90%
T
Tr Tf
V DD
LCD Module
DOT Mtrix
+5V
VO VR
(VR=20K)
V SS
16
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
Application Circuit
M
E P3.0
L 8
R/W P3.1
P3.2
C D RS
0
DB0~DB7 P1.0~P1.7
D U
3
L
Vdd Vdd 1
Vss Vss
E
(6M Hz)
Application Flowchart
IC Initializing
Set Display ON
End
17
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
18
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
2.3. Soldering
(1). Solder only to the I/O terminals.
(2). Use only soldering irons with proper grounding and no leakage.
(3). Soldering temperature: 280 ℃±10℃
(4). Soldering time: 3 to 4 sec.
(5). Use eutectic solder with resin flux fill.
(6). If flux is used, the LCD surface should be covered to avoid flux spatters. Flux residue should be
removed after wards.
2.4. Operation
(1). The viewing angle can be adjusted by varying the LCD driving voltage V0.
(2). Driving voltage should be kept within specified range; excess voltage shortens display life.
(3). Response time increases with decrease in temperature.
(4). Display may turn black or dark blue at temperatures above its operational range; this is (however
19
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn
C1602A-YFDN-DYNC
not pressing on the viewing area) may cause the segments to appear “fractured”.
(5). Mechanical disturbance during operation (such as pressing on the viewing area) nay cause the
segments to appear “fractured”.
2.5. Storage
If any fluid leaks out of a damaged glass cell, wash off any human part that comes into contact with
soap and water. Never swallow the fluid. The toxicity is extremely low but caution should be exercised
at all the time.
20
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn