Professional Documents
Culture Documents
PRTR5V0U2X
PRTR5V0U2X
1. General description
Ultra low capacitance rail-to-rail ElectroStatic Discharge (ESD) protection diode in a small
SOT143B Surface-Mounted Device (SMD) plastic package designed to protect two Hi-Speed data
lines or high-frequency signal lines from the damage caused by ESD and other transients.
PRTR5V0U2X incorporates two pairs of ultra low capacitance rail-to-rail diodes as well as an
additional ESD protection diode to ensure signal line protection even if no supply voltage is
available.
3. Applications
• USB 2.0 ports
• Digital Video Interface (DVI) / High Definition Multimedia Interface (HDMI) interfaces
• Mobile and cordless phones
• Personal Digital Assistants (PDA)
• Digital cameras
• Wide Area Network (WAN) / Local Area Network (LAN) systems
• PCs, notebooks, printers and other PC peripherals
5. Pinning information
Table 2. Pinning information
Pin Symbol Description Simplified outline Graphic symbol
1 GND ground
2 I/O 1 input/output 1 4
4 3 1
3 I/O 2 input/output 2
4 VCC supply voltage
1 2
2 3
SOT143B
006aaa482
6. Ordering information
Table 3. Ordering information
Type number Package
Name Description Version
PRTR5V0U2X SOT143B plastic, surface-mounted package; 4 leads; 1.9 mm pitch; SOT143B
2.9 mm x 1.3 mm x 1 mm body
7. Marking
Table 4. Marking codes
Type number Marking code[1]
PRTR5V0U2X %R1
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VRWM reverse standoff voltage - 5.5 V
Tamb ambient temperature -40 85 °C
Tstg storage temperature -55 125 °C
ESD standards compliance
VESD electrostatic discharge IEC 61000-4-2; contact discharge -8 8 kV
voltage
IPP
100 %
90 %
10 %
tr = 0.6 ns to 1 ns t
30 ns
60 ns 001aaa631
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
9. Characteristics
Table 6. Characteristics
Symbol Parameter Conditions Min Typ Max Unit
VF forward voltage Tamb = 25 °C - 0.7 - V
VBR breakdown voltage [1] 6 - 9 V
IR reverse current VR = 3 V; Tamb = 25 °C [2] - <1 100 nA
C(I/O-GND) input/output to ground f = 1 MHz; V(I/O-GND) = 0 V; Tamb = 25 °C [3] - 1 1.5 pF
capacitance
C(I/O-I/O) input/output to input/ f = 1 MHz; V(I/O-I/O) = 0 V; Tamb = 25 °C [4] - 0.6 - pF
output capacitance
Csup supply pin to ground f = 1 MHz; Vcc = 0 V; Tamb = 25 °C [1] - 16 - pF
capacitance
VCL clamping voltage IPPM = 2.5 A; 8/20 µs; Tamb = 25 °C [5] - 17 - V
IPPM = -2.2 A; 8/20 µs; Tamb = 25 °C [5] - -4 - V
006aaa483 006aaa484
2.0 1.0
C(I/O-GND) C(I/O-I/O)
(pF) (pF)
1.6 0.8
1.2 0.6
0.8 0.4
0.4 0.2
0 0
0 1 2 3 4 5 0 1 2 3 4 5
V(I/O-GND) (V) V(I/O-I/O) (V)
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
GND
GND
GND
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
protected
USB controller IC/device
common mode VBUS
D+ choke D+
D- D-
VBUS GND
aaa-035030
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
D B E A X
y
v M A HE
e
bp w M B
4 3
A1
c
1 2
Lp
b1
e1 detail X
0 1 2 mm
scale
04-11-16
SOT143B
06-03-16
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
12. Soldering
3.25
0.6
(3×)
0.5
(3×)
1.9
solder lands
0.7 0.6
(3×) (3×)
solder resist
2 3 solder paste
occupied area
0.7 0.6
Dimensions in mm
0.75 0.95
0.9
1 sot143b_fr
2.2
1.2
(3×)
1.425
(3×)
solder lands
solder resist
4.6 2.575
occupied area
Dimensions in mm
1.425
1.2 sot143b_fw
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
14. Legal information suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Quick reference data — The Quick reference data is an extract of the
Data sheet status product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status Product Definition Applications — Applications that are described herein for any of these
[1][2] status [3] products are for illustrative purposes only. Nexperia makes no representation
Objective [short] Development This document contains data from or warranty that such applications will be suitable for the specified use
data sheet the objective specification for without further testing or modification.
product development. Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
Preliminary [short] Qualification This document contains data from
any assistance with applications or customer product design. It is customer’s
data sheet the preliminary specification.
sole responsibility to determine whether the Nexperia product is suitable
Product [short] Production This document contains the product and fit for the customer’s applications and products planned, as well as
data sheet specification. for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
[1] Please consult the most recently issued document before initiating or
completing a design. Nexperia does not accept any liability related to any default, damage, costs
[2] The term 'short data sheet' is explained in section "Definitions". or problem which is based on any weakness or default in the customer’s
[3] The product status of device(s) described in this document may have applications or products, or the application or use by customer’s third party
changed since this document was published and may differ in case of customer(s). Customer is responsible for doing all necessary testing for the
multiple devices. The latest product status information is available on customer’s applications and products using Nexperia products in order to
the internet at https://www.nexperia.com. avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Definitions Limiting values — Stress above one or more limiting values (as defined in
Draft — The document is a draft version only. The content is still under the Absolute Maximum Ratings System of IEC 60134) will cause permanent
internal review and subject to formal approval, which may result in damage to the device. Limiting values are stress ratings only and (proper)
modifications or additions. Nexperia does not give any representations or operation of the device at these or any other conditions above those
warranties as to the accuracy or completeness of information included herein given in the Recommended operating conditions section (if present) or the
and shall have no liability for the consequences of use of such information. Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
Short data sheet — A short data sheet is an extract from a full data sheet
the quality and reliability of the device.
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain Terms and conditions of commercial sale — Nexperia products are
detailed and full information. For detailed and full information see the relevant sold subject to the general terms and conditions of commercial sale, as
full data sheet, which is available on request via the local Nexperia sales published at http://www.nexperia.com/profile/terms, unless otherwise agreed
office. In case of any inconsistency or conflict with the short data sheet, the in a valid written individual agreement. In case an individual agreement is
full data sheet shall prevail. concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
Product specification — The information and data provided in a Product
terms and conditions with regard to the purchase of Nexperia products by
data sheet shall define the specification of the product as agreed between
customer.
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be No offer to sell or license — Nothing in this document may be interpreted
valid in which the Nexperia product is deemed to offer functions and qualities or construed as an offer to sell products that is open for acceptance or the
beyond those described in the Product data sheet. grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
Disclaimers may be subject to export control regulations. Export might require a prior
Limited warranty and liability — Information in this document is believed authorization from competent authorities.
to be accurate and reliable. However, Nexperia does not give any
Non-automotive qualified products — Unless this data sheet expressly
representations or warranties, expressed or implied, as to the accuracy
states that this specific Nexperia product is automotive qualified, the
or completeness of such information and shall have no liability for the
product is not suitable for automotive use. It is neither qualified nor tested in
consequences of use of such information. Nexperia takes no responsibility
accordance with automotive testing or application requirements. Nexperia
for the content in this document if provided by an information source outside
accepts no liability for inclusion and/or use of non-automotive qualified
of Nexperia.
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
In the event that customer uses the product for design-in and use in
special or consequential damages (including - without limitation - lost
automotive applications to automotive specifications and standards,
profits, lost savings, business interruption, costs related to the removal
customer (a) shall use the product without Nexperia’s warranty of the
or replacement of any products or rework charges) whether or not such
product for such automotive applications, use and specifications, and (b)
damages are based on tort (including negligence), warranty, breach of
whenever customer uses the product for automotive applications beyond
contract or any other legal theory.
Nexperia’s specifications such use shall be solely at customer’s own risk,
Notwithstanding any damages that customer might incur for any reason and (c) customer fully indemnifies Nexperia for any liability, damages or failed
whatsoever, Nexperia’s aggregate and cumulative liability towards customer product claims resulting from customer design and use of the product for
for the products described herein shall be limited in accordance with the automotive applications beyond Nexperia’s standard warranty and Nexperia’s
Terms and conditions of commercial sale of Nexperia. product specifications.
Right to make changes — Nexperia reserves the right to make changes Translations — A non-English (translated) version of a document is for
to information published in this document, including without limitation reference only. The English version shall prevail in case of any discrepancy
specifications and product descriptions, at any time and without notice. This between the translated and English versions.
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical Notice: All referenced brands, product names, service names and
systems or equipment, nor in applications where failure or malfunction trademarks are the property of their respective owners.
of an Nexperia product can reasonably be expected to result in personal
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved
Contents
1. General description...................................................... 1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking.......................................................................... 2
8. Limiting values............................................................. 3
9. Characteristics.............................................................. 4
10. Application information............................................. 6
11. Package outline.......................................................... 7
12. Soldering..................................................................... 8
13. Revision history..........................................................9
14. Legal information......................................................10
PRTR5V0U2X All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2023. All rights reserved