Professional Documents
Culture Documents
Ee8511 C&i Lab R-2017
Ee8511 C&i Lab R-2017
College Code& Name : 9112 & Mahath Amma Institute of Engineering and Technology
Subject Code & Name: EE8511–Control and Instrumentation Laboratory
Branch : Electrical and Electronics Engineering
Year & Semester : III / V
DATE / SESSION:
LAB SCHEDULE
NAME OF THE NO OF
S.NO DATE &TIME REG NO
LAB CANDITATES
1
EE8511 –
Control and
Instrumentation
2 Laboratory
College Code& Name : 9112 & Mahath Amma Institute of Engineering and Technology
Subject Code & Name: EE8511–Control and Instrumentation Laboratory
Branch : Electrical and Electronics Engineering
Year & Semester : III / V
DATE / SESSION:
MARK STATEMENT
ALLOCATION OF MARKS
Aim/Principle/Apparatus 20
required/Procedure
Tabulation/Circuit/ 40
Program/Drawing
Viva-Voce 10
Record 10
(Regulations2017)
Date: Session: FN / AN
20 40 20 10 10 100
1. Determine the steady step response of the given system using P, PI controllers.
G(s)= 1
S+3
2. Demonstrate Analyze the performance of the given system using ramp input
(i) PI controllers
3. Perform suitable experiment to find the stability of linear systems which is used to rectify the
steady state error.
5. Carry out suitable tests to Analyze the characteristics of linear variable displacement transducer
and plot the graph.
6. Draw the characteristics of the given LDR and RTD using optical sensor.
7. Design and implement a lag- lead compensator and draw the frequency response plots from the
measured value.
8. Design and implement a lead and lag compensator and draw the frequency response plots from
the measured value.
9. Find the angular position and plot the performance characteristics of the given servo motor.
10. Demonstrate and Analyze the performance of Synchro transmitter and receiver which is used for
automatic control system.
11. Find the response of the first order transfer function with analog controllers using MATLAB
software tool.
12. Find the response of the second order transfer function with analog controllers using MATLAB
software tool.
16. Measure and plot the characteristics of suitable transducer which helps to regulate cold and heat.
17. Measure and plot the characteristics of suitable transducer which is used to measure the strain.
18. Draw the characteristics of the strain gauge and to obtain error.
19. Calibrate the energy meter and find the error, percentage error for Lamp load.
20. Calculate the percentage error of the given Wattmeter by direct loading.
21. Design and plot the characteristics of the amplifier which is used to amplify very low level
signals.
22. Design a digital to analog converter by R-2R ladder network and weighted resistor network.
24. Using MATLAB software tool design a closed loop system and analyze the characteristics.