Professional Documents
Culture Documents
BEL8 S (3x2'') 450 5M
BEL8 S (3x2'') 450 5M
F/C 2"
15 PEAK BELL DIA.
16 17 216 (8.5 in)
BODY DIA.
(6.54 in)
FEED/CONC. PORT
in)
2" VICTAULIC DANGER
6
.9
HIGH PRESSURE
166
(7
.4
+0
(4.65 in)
G:\Yuri\QUALITY CONTROL\BLANK\ONLY BEL.JPG
(6.54 in)
SCREW HEX HEAD
DIN 933 OR
DIN EN 24017
M8x70
118
166
229 (9.02 in) 45 (1.77 in)
10(0.4in)max. 14
FEED/CONC. PORT
F/C 2" F/C 2" PERMEATE PORT
PORT SUPPORT SUPPORT PORT 2" VICTAULIC
3 SUPPORTS REQUIRED 1" BSP-FEMALE
TYPx2
13 12 11 10 9
This drawing is an integral part of
the general statement of use
and Technical Manual
30 (1.18 in)
Notes.
1. Certified drawing.
2. *ASME Parts 5096 (200.6 in) REF
Length for
3. Item 16 & 17 must be located on feed side
5 membrane 8
4. Weight, kg (lb): 90 (198.5). elements
5. Drawing units: mm (inches).
6. Saddles can be shimmed if required.
7. This vessel is supplied with two straps for external saddles.
8. Do not scale drawing, may be reprinted on any paper size or copied.
9. Top paint: White, RAL 9010 (standard).
10. Membrane element: Toray. 1 2 3 4 5 6 7
11. Installation & Storage: Indoor.
Warning. MODELO 8
1. Never pressurize a pressure vessel that was not loaded with membrane elements.
2. TITLE:
3. Max. allowable working pressure not to exceed 450 psi. (31 bar). DESIGN DMG 28/10/2016
BEL8-S-(3x2'')-450-5M
4. Permeate internal pressure not to exceed 125 psi. (8.6 bar). RO PRESSURE VESSEL CHECK MAF 28/10/2016
Rev. Changes: Drawn by: Check by: Approved by: Date REV.: 0