Professional Documents
Culture Documents
Sampler Temp Acc
Sampler Temp Acc
The Sample Heater / Cooler Temperature Accuracy test is a manual test that verifies the internal electronics which
drive the temperature inside the Sample Heater / Cooler to the set point defined by the instrument control software.
This verifies functionality of the Sample Heater / Cooler electronics, internal probe and control software. The
temperature is measured near to the internal temperature probe.
The test requires a calibrated temperature measuring device that is accurate to + or - 1.0°C. Two temperature
set-points per sensor zone are tested.
The Sample Heater / Cooler Temperature Accuracy test passes only if the recorded absolute temperature
inaccuracy is + or - 4.0°C from the set point.
Waters Project Name and Version: SQT_E_2695_2475 v4.00 © 2007 - 2017 Waters Corporation. All rights reserved.
Date: Monday, February 20, 2017
Printed: 11:04:39 AM US/Eastern Page: 1 of 1