Professional Documents
Culture Documents
FY Btech - EX - Electrical & Electronics Engineering - SEM - II - APR 2023
FY Btech - EX - Electrical & Electronics Engineering - SEM - II - APR 2023
FY Btech - EX - Electrical & Electronics Engineering - SEM - II - APR 2023
[1]
d) Two impedances of 20∠−45° Ω and 30∠30° Ω are [6] CO1 L3
connected in series across a certain supply and the
resulting current is found to be 10 A. If the supply voltage
remains unchanged, calculate the supply current when
the impedances are connected in parallel.
2 a) Each phase of star-connected load has a resistance of [8] CO3 L3
30 W and a capacitance of 50µF in series. Determine (a)
line current and phase current, (b) the total power
consumed (c) the kVA, when the load is connected to a
440 V, 3-phase, 50 Hz supply.
b) A delta-connected load draws a current of 15 ampere at [8] CO2 L3
a lagging power factor of 0.85 from a 440 V, 50 Hz, 3-
phase supply. Find the resistance and inductance of
each phase. Also calculate the power dissipation if
connected in star.
3 Solve any two
a) Output characteristics of common emitter configuration is [8] CO2 L3
shown in graph. Determine the ICsat, VCEsat, ICQ and VCEQ
referred to the graph.
[2]
b) Design a Power supply for powering circuit at fixed [8] CO3 L3
positive18Volt
Draw the circuit diagram with waveforms. -------4M
Give specification of transformer secondary and diode
selection with PIV justification. --------3M.
Calculate ripple factor of bridge rectifier capacitive filter
for 1000μF & load resistance 220Ω--------1M
c) Identify the circuit and Draw the output Vo of given circuit [8] CO3 L3
[3]