Professional Documents
Culture Documents
Design of Slab (Two Way)
Design of Slab (Two Way)
(TWO WAY)
Short Span (Clear) 4.00 m
Long Span (Clear) 4.00 m
Live Load on the Slab (LL) 3.83 KN / sqm
Comp.stess of concrete M - 15 (fck) 15.00 N / sqm
Tensile stress of steel (fy) 415.00 N / sqm
Unit wt of concrete 25.00 KN / cum
Unit wt of floor finish 50 mm 24.00 KN / sqm
Clear concrete cover 19.00 mm
Bearing of slab 230.00 mm
Overall depth 133.33 mm
Provide Overall depth D 125.00 mm
Dia of bars for short direction 10.00 mm
Dia of bars for long direction 10.00 mm
Effective Depth d 101.00 mm
Loading on the slab
Dead Load of the slab (DL) 3.13 KN / sqm
Floor Finish 1.20 KN / sqm
Other Load 0.50 KN / sqm
Live Load on the slab 3.83 KN / sqm
Total Load on the slab (TL) 8.66 KN / sqm
Design Load = (Total Load x Load Factor i.e. 1.5) 12.98 KN / sqm
Effective Span lx 4.10 m
ly 4.10 m
Ratio ly/lx 1.000
From Table (26 or 27 of IS 456) BM Coefficients are as follows;
1.5 ax 1.75 ay
For negative moments (at top) 0.075 0.057 0.084 0.047
For positive moments (at botto 0.056 0.042 0.063 0.035
Calculated BM per unit width of slab are as follows;
Mx = ax w lx2 My = ay w lx2
For negative moments (at top) 12.45 10.26 KN-m/m
For positive moments (at bottom) 9.17 7.64 KN-m/m
BM are as follow;
s will be as follows;
ength 3600 mm
ength 3600 mm
SLAB DESIGN :-
TOILET AND BATH
(TWO WAY)
Short Span (Clear) 3.00
Long Span (Clear) 3.50
Live Load on the Slab (LL) 3.83
Comp.stess of concrete M - 15 (fck) 15.00
Tensile stress of steel (fy) 415.00
Unit wt of concrete 25.00
Unit wt of floor finish 50 mm 24.00
Clear concrete cover 20.00
Bearing of slab 230.00
Overall depth 100.00
Provide Overall depth D 125.00
Dia of bars for short direction 10.00
Dia of bars for long direction 10.00
Effective Depth d 100.00
Loading on the slab
Dead Load of the slab (DL) 3.13
Floor Finish 1.20
Other Load 0.50
Live Load on the slab 3.83
Total Load on the slab (TL) 8.66
Design Load = (Total Load x Load Factor i.e. 1.5) 12.98
Effective Span lx 3.10
ly 3.60
Ratio ly/lx 1.161
1.5 ax 1.75 ay
For negative moments (at top) 0.075 0.06280645 0.084 0.047
For positive moments (at bottom) 0.056 0.04651613 0.063 0.035
Calculated BM per unit width of slab are as follows;
Mx = ax w lx2 My = ay w lx2
For negative moments (at top) 7.84 5.86
For positive moments (at bottom) 5.80 4.37
KN / sqm
KN / sqm
KN / sqm
KN / sqm
KN / sqm
KN / sqm
m
m
My = ay w lx2
KN-m/m
KN-m/m
N-mm/m
x 0.48) x 62
62
Permitted S/d
6.37 x 1000000
100
Permitted S/d
Long Span
KN-m/m
KN-m/m
Long Span
mm2/m
mm2/m
Long Span
mm c/c
mm c/c
mm c/c
Nos. of Length 3100 mm
Nos. of Length 3100 mm
SLAB DESIGN :- 0
Edges conditions :- #REF!
8 mm dia.
7" c/c
8 mm dia.
9" c/c
8 mm dia.
6" c/c
UP
10 mm dia.
8" c/c
10 mm dia.
7" c/c
10 mm dia.
6" c/c
10 mm dia.
5" c/c
UP
748314294.xls[3] 30/32 04/25/2024[06:26:49]
SLAB DESIGN :- Study Room
Edges conditions :- (One long edge discontineous)
8 mm dia.
7" c/c
8 mm dia.
7" c/c
8 mm dia.
8" c/c
8 mm dia.
5" c/c