Professional Documents
Culture Documents
DNI Master AS Tech Pres
DNI Master AS Tech Pres
a scent of future
3,5
2,5
1,5
0,5
0
C12 C16 C20 C24 C26 C32 C36 C40
MASTER AS – Innovation
3D Space Movements
X Z
AS provides unprecedented
automation and greater flexibility in sample
capacity.
Solvent vials 5
Waste vials 5
MASTER AS – Syringe
The sample volumes, from 0.1
to 500 µl, are measured with
great accuracy and precision.
This guarantees repeatability
and linearity of the quantitative
data.
MASTER AS - Precision
Linearity of Syringes
600
y = 0,9762x
500 R2 = 0,9999
400
mg
300
200
100
0
0 100 200 300 400 500 600
ul
10 1.007 0,173
25 0.887 0,157
50 0.893 0,158
MASTER AS - Repeatability
Chromatographic Test
C8 C10 C12 C14
1 188,749 157,419 102,825 101,723
2 188,317 156,319 102,568 101,577
3 187,259 155,916 101,847 101,07
4 187,479 156,438 101,89 101,644
5 188,231 156,458 102,241 102,004
6 188,108 156,314 102,214 101,828
7 188,109 156,861 102,165 101,956
8 188,024 156,89 101,859 101,196
9 188,73 156,865 102,498 101,875
10 188,891 156,833 102,431 101,771
11 188,518 157,469 102,749 101,401
Media (mV.s) 188,220 156,707 102,299 101,640
SD 0,512 0,474 0,347 0,305
RSD% 0,272 0,303 0,339 0,300
Linearity of 500μL Syringe
600
500 y = 0,9733x
R2 = 0,9999
400
mg
300
200
100
0
0 100 200 300 400 500 600
ul
MASTER AS - Linearity
Configuration
Software
Touch Screen
MASTER AS – Configuration
Vial
&
Syringe
MASTER AS – Setup
Injection Mode
4 parameters
• Solvent plug
• Internal standard
• Sample
• Air plug
MASTER AS – Parameters
Solvent Plug
MASTER AS – Parameters
Solvent
&
Waste
It is possible to set
up to five solvents
and I.S. with five
wastes, to
eliminate the
possibility of
sample carry over
MASTER AS – Setup
Solvent
Wash
All, any or a
combination of pre
and post solvent
washes can be
programmed during
method setup
MASTER AS – Parameters
Injector
Up to three
injectors can be
selected for each
method
MASTER AS – Parameters
Sample
Sequence
MASTER AS – Sequence
Priority
Sequence
The possibility
during a analysis
of setting up a
sequence that
starts
immediately after
the end of the
current run
MASTER AS – Sequence
Software Setup
MASTER AS – Setup
Software Setup
MASTER AS – Parameters
Technical Specifications
MASTER AS - Specifications
Variable Injection Speed YES
Internal Standard Addition YES
Priority Sequence YES
Injection Positions 3
Repeatability RSD% < 0.5% (C12-C40)
MASTER AS - Specifications
What do you need for your
AS ?
MASTER AS - Consumables
Vials
VIALS for Liquid Autosamplers
Description Set of Code
Vial 12x32 mm - volume 100 µl 50 pieces 1262.011 004 MASTER AS - ALS1000 - HT300A - HT310A
Vial 12x32 mm - volume 100 µl 50 pezzi Sample
Vial 12x32 mm - volume 1,5 ml 50 pieces 1262.095 002 MASTER AS - ALS1000 - HT300A - HT310A
Vial 12x32 mm - volume 1,5 ml 50 pezzi Sample
Vial 23x50 mm - volume 10.5 ml - screw top + cap + septa TFE/SIL 5 pieces 1262.017 001 MASTER AS - ALS1000
Vial 23x50 mm - volume 10.5 ml - chiusura a vite completo di tappo e setto TFE/SIL 5 pezzi Solvent
Vial 23x50 mm - volume 10.5 ml - screw top + cap + septa TFE/SIL 5 pieces 1262.017 001 MASTER AS
Vial 23x50 mm - volume 10.5 ml - chiusura a vite completo di tappo e setto TFE/SIL 5 pezzi Waste
MASTER AS - Consumables
Septa and Crimps
Septa and Crimp for Liquid Autosamplers
Description Set of Code
Crimp seal for Vial 12x32 mm 100 pieces 1260.895 001 MASTER AS - ALS1000 - HT300A - HT310A
Capsula per Vial 12x32 mm 100 pezzi
Septa TFE/BUT for Crimp seal 100 pieces 1260.995 004 MASTER AS - ALS1000 - HT300A - HT310A
Setto TFE/BUT per Capsula 100 pezzi
Septa TFE/SIL for Crimp seal 100 pieces 1260.905 004 MASTER AS - ALS1000 - HT300A - HT310A
Setto TFE/SIL per Capsula 100 pezzi
Hand crimper for Crimp seal 1 piece 1343.000 006 MASTER AS - ALS1000 - HT300A - HT310A
Pinza Chiudi Vials per Capsula 1 pezzo
1343.000 006
1260.995 004
1260.895 001
MASTER AS - Consumables
Syringes
MASTER AS - Consumables
Conclusions
Combined with GC
it offers a complete system,
versatyle and reliable for
every injection type.
MASTER AS – Conclusions