Professional Documents
Culture Documents
Canusa PDS A4 GTSPP100
Canusa PDS A4 GTSPP100
Canusa PDS A4 GTSPP100
GTS-PP-100
One-piece protective sleeve with pre-attached closure for
high operating temperature offshore polyolefin pipelines
Canusa-CPS is a leading manufacturer
of specialty pipeline coatings which, for
over 30 years, have been used for
sealing and corrosion protection of
NUSA-CPS
pipeline joints and other substrates. CA
Canusa high performance products are
manufactured to the highest quality
standards and are available in a number
of configurations to accommodate your
specific project applications.
Product Description
The GTS-PP-100 system provides
excellent adhesion and superior
corrosion protection to polyethylene Long Term Corrosion Protection Applications
and polypropylene coated pipelines
GTS-PP-100 provides superior
operating offshore up to 100°C (212°F)
corrosion protection because of the Oil & Gas
[onshore up to 80°C (176°C)]. GTS-
high performance system approach.
PP-100 sleeve has been designed with a
The PP backing/adhesive combination
unique crosslinked polypropylene
backing and a high performance
provides protection with the structural Offshore Pipelines
integrity of an extruded coating,
adhesive. The combination allows
resulting in excellent resistance to
sleeve installation and bonding to
polyethylene and polypropylene
cathodic disbondment and excellent Girth-Weld Joints
durability against abrasion and impact.
mainline coatings. Lower preheats are
The result is effective, long term
required versus other systems and
protection against corrosion. Polypropylene
superior bonding is achieved without
damaging the coating during
installation. Superior Shear & Impact Resistance Configurations
The GTS-PP-100 sleeve has superior
Features & Benefits impact and shear resistance by virtue of Wrapid Sleeve™
its polypropylene backing. The sleeve
Unique Adhesive Technology is particularly useful in offshore
Canusa's unique adhesive technology applications where in-service impact is 2-Layer
allows for lower installation pre-heats expected. The rapid cooling
and superior bonding to polyethylene characteristic of polypropylene allows
and polypropylene coatings. The better resistance to offshore laying Pipe Sizes
adhesive has been formulated to rollers.
effectively bond directly to the mainline 115 - 1220 (4” - 48”)
coating and the steel. The result is a Rapid & Reliable Installation
superior bond to both substrates with
quicker application. Lower pre-heat means less time Temperature Range
heating and improved production. The
pre-manufactured sleeve means less up to 100°C (212°F)
time in handling, positioning and
installation. The overall system
minimizes installation time and labour up to 80°C (176°F)
costs while promoting high production
rates onshore and offshore.
80º 176°
70º 158º
60º 140º
50º 122º
17
Volume Resistivity ASTM D257 ohm.cm 2 x 10
Low Temperature Brittleness @ -40°C (-40°F) ASTM D746 – pass
Stress Crack Resistance @ 50°C (122°F) ASTM D1693 hours 2000
L S
Sleeve Thickness (”as supplied”) mm 2.1 2.5
Sleeve Thickness (’fully recovered”) mm 3.0 3.5
How To Order:
Standard Ordering Options - GTS-PP-100
Dimensions & Ordering Info
sleeve
GTS-PP-100 915-450 BK/L L Thickness S Thickness width
Thickness L, S
Colour BK - Black CPS
USA-
CAN
Sleeve Width 450, 600 mm (18", 24")
pipe
Pipe Size 115 - 1220 mm (4" - 48") size
Adhesive (min. thickness as supplied) 1.1 mm (45 mils) 1.5 mm (60 mils)
Min. Sleeve Width =
Backing (min. thickness as supplied) 1.0 mm (40mils) 1.0 mm (40mils) Bare Steel Dimension + 50 mm (2")
on each side of the pipe joint.
Product Name GTS-PP-100
* Non-standard sleeve widths are available from 250mm up to 900mm
www.canusacps.com