Professional Documents
Culture Documents
Datasheet For Control Valve - Ifb
Datasheet For Control Valve - Ifb
COVER ........................................................................................................................... 1
TABEL REVISI ........................................................................................................................... 2
DAFTAR ISI ........................................................................................................................... 3
DATASHEET ........................................................................................................................... 4
PENGADAAN 2 UNIT SEPARATOR, 1 UNIT KO DRUM, DAN 1 UNIT SCRUBBER
PACKAGE DI SP PUSPA ASRI FIELD JAMBI
8 Flow Temperature ⁰F 95 95 95
9 Cp/Cv Specific Heat Ratio - - 1.03 -
10 Molecular Weight - - 144.29 -
11 Density lb/ft3 - 53.513 -
12 Specific Gravity - 0.77 0.77 0.77
13 Viscocity cP 1.080 1.080 1.080
14 Vapor Pressure psia 14.688 14.688 14.688
15 Critical Pressure psig 552 552 552
o
16 Critical Temperature F 730 730 730
17 Required Cv - 16.746 20.966 25.273
18 Travel % 21 26 30
19 Noise Level dbA <50 <50 <50
20 Pipe Line Size In : 3" Sch. Std. Wt. 52 Type : Spring & Diaphragm
LINE
21 & Schedule Out : 3" Sch. Std. Wt. 53 Mfr./ Model No. : 667
22 54 Size/ Eff. Area : 40i
23 Type : Globe 55 On-Off / Modulating : Modulating
24 Body Size : 2" 56 Air Supply To Actuator : 0-33 psig
25 Rating and End Conn. : 150#, RF Flange 57 Spring Range : 1-1/8"
VALVE BODY / BONNET
ACTUATOR
26 Body & Bonnet Material : WCC (CS) / Carbon Steel 58 Actuator Orientation : Vertical Up
27 Bonnet Type : Plain 59 Handwheel Type : N/A
28 Packing Material : Single PTFE 60 Air Failure Valve : Fail Close
29 Bolt & Nuts Material : SA-193-B7 Studs/2H Nuts NCF2 61 Spring Action (Open/ Close) : Open on Level Rise
30 NACE Requirement : N/A 62 Colour : Manufacture Standard
31 Colour : Manufacture Standard 63 Air Regulator : Yes
32 Mfr./ Model : Manufacture Standard 64
33 Flow Direction : Down 65
34 Number : 29 66 Type : 3582
35 Characteristic : Linier 67 Mfr./ Model No. : Manufacture standard
36 Balanced / Unbalance : Balanced 68 Signal Input : 3 - 15 psig
37 Max. Rated Cv/ Fd : 207.69 69 Signal Output : 3 - 15 psig
POSITIONER
47 79
48 80
49 81
50 82
51 84
Notes :
PENGADAAN 2 UNIT SEPARATOR, 1 UNIT KO DRUM, DAN 1 UNIT SCRUBBER
PACKAGE DI SP PUSPA ASRI FIELD JAMBI
8 Flow Temperature ⁰F - 95 -
9 Cp/Cv Specific Heat Ratio - - 1.2 -
10 Molecular Weight - - 27.59 -
11 Density lb/ft3 - 0.187 -
12 Specific Gravity - - -
13 Viscocity cP - 1.0800 -
14 Vapor Pressure psia - - -
15 Critical Pressure psig - - -
16 Critical Temperature - - - -
17 Required Cv - - 27.730 -
18 Travel % - 69 -
19 Noise Level dbA - 62 -
20 Pipe Line Size In : 3" Sch. Std. Wt. 52 Type : Spring & Diaphragm
LINE
21 & Schedule Out : 3" Sch. Std. Wt. 53 Mfr./ Model No. : 657
22 54 Size/ Eff. Area : 40i
23 Type : Globe 55 On-Off / Modulating : Modulating
24 Body Size : 3" 56 Air Supply To Actuator : 0-33 psig
25 Rating and End Conn. : 150#, RF Flange 57 Spring Range : 1-1/8"
VALVE BODY / BONNET
ACTUATOR
26 Body & Bonnet Material : WCC (CS) / Carbon Steel 58 Actuator Orientation : Vertical Up
27 Bonnet Type : Plain 59 Handwheel Type : N/A
28 Packing Material : Single PTFE 60 Air Failure Valve : Fail Open
29 Bolt & Nuts Material : SA-193-B7 Studs/2H Nuts NCF2 61 Spring Action (Open/ Close) : Open on Pressure Rise
30 NACE Requirement : N/A 62 Colour : Manufacture Standard
31 Colour : Manufacture Standard 63
32 Mfr./ Model : Manufacture Standard 64
33 Flow Direction : Down 65
34 Number : 29 66 Type : 3582
35 Characteristic : Equal Percent 67 Mfr./ Model No. : manufacture standard
36 Balanced / Unbalance : Balanced 68 Signal Input : 3 - 15 psig
37 Max. Rated Cv/ Fd : 262.8 69 Signal Output : 3 - 15 psig
POSITIONER
47 79
48 80
49 81
50 82
51 84
Notes :
PENGADAAN 2 UNIT SEPARATOR, 1 UNIT KO DRUM, DAN 1 UNIT SCRUBBER
PACKAGE DI SP PUSPA ASRI FIELD JAMBI
8 Flow Temperature ⁰F 95 95 95
9 Cp/Cv Specific Heat Ratio - - - -
10 Molecular Weight - - - -
11 Density lb/ft3 - - -
12 Specific Gravity - 1 1 1
13 Viscocity cP 0.857 0.857 0.857
14 Vapor Pressure psia 14.623 14.623 14.623
15 Critical Pressure psig 4354 4354 4354
o
16 Critical Temperature F - - -
17 Required Cv - 6.849 8.675 10.585
18 Travel % 42 53 66
19 Noise Level dbA <50 <50 <50
20 Pipe Line Size In : 2" Sch. Std. Wt. 52 Type : Spring & Diaphragm
LINE
21 & Schedule Out : 2" Sch. Std. Wt. 53 Mfr./ Model No. : 667
22 54 Size/ Eff. Area : 30i
23 Type : Globe 55 On-Off / Modulating : Modulating
24 Body Size : 1" 56 Air Supply To Actuator : 0-33 psig
25 Rating and End Conn. : 150#, RF Flange 57 Spring Range : 3/4 Inch
VALVE BODY / BONNET
ACTUATOR
26 Body & Bonnet Material : WCC (CS) / Carbon Steel 58 Actuator Orientation : Vertical Up
27 Bonnet Type : Plain 59 Handwheel Type : N/A
28 Packing Material : Single PTFE 60 Air Failure Valve : Fail Close
29 Bolt & Nuts Material : SA-193-B7 Studs/2H Nuts NCF2 61 Spring Action (Open/ Close) : Open on Level Rise
30 NACE Requirement : N/A 62 Colour : Manufacture Standard
31 Colour : Manufacture Standard 63 Air Regulator : Yes
32 Mfr./ Model : Manufacture Standard 64
33 Flow Direction : Up 65
34 Number : 129 66 Type : 3582
35 Characteristic : Linier 67 Mfr./ Model No. : Manufacture standard
36 Balanced / Unbalance : Unbalanced 68 Signal Input : 3 - 15 psig
37 Max. Rated Cv/ Fd : 35.78 69 Signal Output : 3 - 15 psig
POSITIONER
47 79
48 80
49 81
50 82
51 84
Notes :
PENGADAAN 2 UNIT SEPARATOR, 1 UNIT KO DRUM, DAN 1 UNIT SCRUBBER
PACKAGE DI SP PUSPA ASRI FIELD JAMBI
8 Flow Temperature ⁰F - 98 -
9 Cp/Cv Specific Heat Ratio - - 1.190 -
10 Molecular Weight - - 27.9 -
11 Density lb/ft3 - - -
12 Specific Gravity - - -
13 Viscocity cP - 0.0110 -
14 Vapor Pressure psia - - -
15 Critical Pressure psig - - -
16 Critical Temperature - - - -
17 Required Cv - - 7.152 -
18 Travel % - 66 -
19 Noise Level dbA - 54 -
20 Pipe Line Size In : 3" Sch. Std. Wt. 52 Type : Spring & Diaphragm
LINE
21 & Schedule Out : 3" Sch. Std. Wt. 53 Mfr./ Model No. : 657
22 54 Size/ Eff. Area : 40i
23 Type : Globe 55 On-Off / Modulating : Modulating
24 Body Size : 2" 56 Air Supply To Actuator : 0-33 psig
25 Rating and End Conn. : 150#, RF Flange 57 Spring Range : 3/4"
VALVE BODY / BONNET
ACTUATOR
26 Body & Bonnet Material : WCC (CS) / Carbon Steel 58 Actuator Orientation : Vertical Up
27 Bonnet Type : Plain 59 Handwheel Type : N/A
28 Packing Material : Single PTFE 60 Air Failure Valve : Fail Open
29 Bolt & Nuts Material : SA-193-B7 Studs/2H Nuts NCF2 61 Spring Action (Open/ Close) : Open on Pressure Rise
30 NACE Requirement : N/A 62 Colour : Manufacture Standard
31 Colour : Manufacture Standard 63
32 Mfr./ Model : Manufacture Standard 64
33 Flow Direction : Up 65
34 Number : 129 66 Type : 3582
35 Characteristic : Equal Percent 67 Mfr./ Model No. : manufacture standard
36 Balanced / Unbalance : Balanced 68 Signal Input : 3 - 15 psig
37 Max. Rated Cv/ Fd : 57.4 69 Signal Output : 3 - 15 psig
POSITIONER
47 79
48 80
49 81
50 82
51 84
Notes :
PENGADAAN 2 UNIT SEPARATOR, 1 UNIT KO DRUM, DAN 1 UNIT SCRUBBER
PACKAGE DI SP PUSPA ASRI FIELD JAMBI
8 Flow Temperature ⁰F - 94 94
9 Cp/Cv Specific Heat Ratio - - - -
10 Molecular Weight - - - -
11 Density lb/ft3 - 47.110 47.110
12 Specific Gravity - - - -
13 Viscocity cP - 1.176 1.176
14 Vapor Pressure psia - 14.7 14.7
15 Critical Pressure psig - 552 552
o
16 Critical Temperature F - - -
17 Required Cv - - 0.002980 0.002980
18 Travel % - 10 10
19 Noise Level dbA - <50 <50
20 Pipe Line Size In : 2" Sch. Std. Wt. 52 Type : Spring & Diaphragm
LINE
21 & Schedule Out : 2" Sch. Std. Wt. 53 Mfr./ Model No. : 667
22 54 Size/ Eff. Area : 40i
23 Type : Globe 55 On-Off / Modulating : Modulating
24 Body Size : 1" 56 Air Supply To Actuator : 0-33 psig
25 Rating and End Conn. : 150#, RF Flange 57 Spring Range : 3/4"
VALVE BODY / BONNET
ACTUATOR
26 Body & Bonnet Material : WCC (CS) / Carbon Steel 58 Actuator Orientation : Vertical Up
27 Bonnet Type : Plain 59 Handwheel Type : N/A
28 Packing Material : Single PTFE 60 Air Failure Valve : Fail Close
29 Bolt & Nuts Material : SA-193-B7 Studs/2H Nuts NCF2 61 Spring Action (Open/ Close) : Open on Level Rise
30 NACE Requirement : N/A 62 Colour : Manufacture Standard
31 Colour : Manufacture Standard 63 Air Regulator : Yes
32 Mfr./ Model : Manufacture Standard 64
33 Flow Direction : Up 65
34 Number : 152 66 Type : 3582
35 Characteristic : Micro-Flow 1 Deg ( Eq Pct ) 67 Mfr./ Model No. : Manufacture standard
36 Balanced / Unbalance : Unbalanced 68 Signal Input : 3 - 15 psig
37 Max. Rated Cv/ Fd : 0.0628 69 Signal Output : 3 - 15 psig
POSITIONER
47 79
48 80
49 81
50 82
51 84
Notes :
PENGADAAN 2 UNIT SEPARATOR, 1 UNIT KO DRUM, DAN 1 UNIT SCRUBBER
PACKAGE DI SP PUSPA ASRI FIELD JAMBI
8 Flow Temperature ⁰F - 94 94
9 Cp/Cv Specific Heat Ratio - - 1.2 1.2
10 Molecular Weight - - 22.75 22.75
11 Density lb/ft3 - - -
12 Specific Gravity - - -
13 Viscocity cP - 0.0110 0.011
14 Vapor Pressure psia - - -
15 Critical Pressure psig - - -
16 Critical Temperature - - - -
17 Required Cv - - 26.678 32.227
18 Travel % - 32 39
19 Noise Level dbA - 67 68
20 Pipe Line Size In : 4" Sch. Std. Wt. 52 Type : Spring & Diaphragm
LINE
21 & Schedule Out : 4" Sch. Std. Wt. 53 Mfr./ Model No. : 657
22 54 Size/ Eff. Area : 40i
23 Type : Globe 55 On-Off / Modulating : Modulating
24 Body Size : 2" 56 Air Supply To Actuator : 0-33 psig
25 Rating and End Conn. : 150#, RF Flange 57 Spring Range : 1-1/8"
VALVE BODY / BONNET
ACTUATOR
26 Body & Bonnet Material : WCC (CS) / Carbon Steel 58 Actuator Orientation : Vertical Up
27 Bonnet Type : Plain 59 Handwheel Type : N/A
28 Packing Material : Single PTFE 60 Air Failure Valve : Fail Open
29 Bolt & Nuts Material : SA-193-B7 Studs/2H Nuts NCF2 61 Spring Action (Open/ Close) : Open on Pressure Rise
30 NACE Requirement : N/A 62 Colour : Manufacture Standard
31 Colour : Manufacture Standard 63
32 Mfr./ Model : Manufacture Standard 64
33 Flow Direction : Down 65
34 Number : 29 66 Type : 3582
35 Characteristic : Equal Percent 67 Mfr./ Model No. : manufacture standard
36 Balanced / Unbalance : Balanced 68 Signal Input : 3 - 15 psig
37 Max. Rated Cv/ Fd : 197.5 69 Signal Output : 3 - 15 psig
POSITIONER
47 79
48 80
49 81
50 82
51 84
Notes :
PENGADAAN 2 UNIT SEPARATOR, 1 UNIT KO DRUM, DAN 1 UNIT SCRUBBER
PACKAGE DI SP PUSPA ASRI FIELD JAMBI
8 Flow Temperature ⁰F - 91 91
9 Cp/Cv Specific Heat Ratio - - - -
10 Molecular Weight - - - -
11 Density lb/ft3 - 47.999 47.999
12 Specific Gravity - - - -
13 Viscocity cP - 0.733 0.733
14 Vapor Pressure psia - 14.7 14.7
15 Critical Pressure psig - 552 552
o
16 Critical Temperature F - - -
17 Required Cv - - 0.371 5.554
18 Travel % - 10 75
19 Noise Level dbA - <50 <50
20 Pipe Line Size In : 2" Sch. Std. Wt. 52 Type : Spring & Diaphragm
LINE
21 & Schedule Out : 2" Sch. Std. Wt. 53 Mfr./ Model No. : 667
22 54 Size/ Eff. Area : 40i
23 Type : Globe 55 On-Off / Modulating : Modulating
24 Body Size : 1" 56 Air Supply To Actuator : 0-33 psig
25 Rating and End Conn. : 150#, RF Flange 57 Spring Range : 3/4"
VALVE BODY / BONNET
ACTUATOR
26 Body & Bonnet Material : WCC (CS) / Carbon Steel 58 Actuator Orientation : Vertical Up
27 Bonnet Type : Plain 59 Handwheel Type : N/A
28 Packing Material : Single PTFE 60 Air Failure Valve : Fail Close
29 Bolt & Nuts Material : SA-193-B7 Studs/2H Nuts NCF2 61 Spring Action (Open/ Close) : Open on Level Rise
30 NACE Requirement : N/A 62 Colour : Manufacture Standard
31 Colour : Manufacture Standard 63 Air Regulator : Yes
32 Mfr./ Model : Manufacture Standard 64
33 Flow Direction : Up 65
34 Number : 129 66 Type : 3582
35 Characteristic : Micro-Flow ( Eq Pct ) 67 Mfr./ Model No. : Manufacture standard
36 Balanced / Unbalance : Unbalanced 68 Signal Input : 3 - 15 psig
37 Max. Rated Cv/ Fd : 26.30 69 Signal Output : 3 - 15 psig
POSITIONER
47 79
48 80
49 81
50 82
51 84
Notes :
Product Bulletin
657 and 667 Size 30i - 76i 61.1:657 Size i
D104018X012 April 2020
Features
n Improved Ease of Use-- Integral mounting pad for
Fisher FIELDVUE™ DVC2000 and DVC6200 digital
valve controllers eliminates the traditional
mounting bracket and reduces the number of parts
required to mount.
www.Fisher.com
Product Bulletin
61.1:657 Size i 657 and 667 Size 30i - 76i
April 2020 D104018X012
Specifications
Standard Operating Pressure Range(1) Volumetric Displacement
657 and 667: J 0.2 to 1.0 bar (3 to 15 psig) or J 0.4 See table 1
to 2.0 bar (6 to 30 psig)
657-4 and 667-4: 0.2 to 1.9 bar (3 to 27 psig) Signal Connections
667 Size 76i: J 0.4 to 2.0 bar (6 to 30 psig) or J 0 to
Sizes 30i - 60i and 667 Size 76i: 1/4 NPT internal
3.1 bar (0 to 45 psig)
Size 70i: 1/2 NPT internal.
Oversize signal connections available
Maximum Travel
See table 2 Effective Diaphragm Area
See table 2
Output Indication
Stainless steel disk or pointer and graduated scale Construction Materials (refer to figure 1)
Diaphragm Casing
Stroking Speed Sizes 30i - 76i: Steel
Diaphragm
Dependent on actuator size, travel, spring rate, initial Sizes 30i - 76i: J Nitrile on nylon, J Silicone on
spring compression, and supply pressure. If stroking polyester, J EPDM on aramid, J FKM on aramid
speed is critical, consult your Emerson sales office. Diaphragm Plate
657 Sizes 30i- 60i: J Cast aluminum
Maximum Allowable Thrust(2) 657 Size 70i: J Cast iron or J steel
See table 2 667 Sizes 30i- 60i and 76i: J Cast aluminum
667 Size 70i: J Cast iron or J steel
Actuator Spring: Steel
Operating Temperature Range(1) Spring Adjustor: Steel
Standard Construction (Nitrile Elastomers): -40 to Spring Seat: J Cast iron or J steel
82_C (-40 to 180_F) Actuator Stem: Steel
Optional Construction (Silicone Diaphragm) and Travel Indicator: Stainless steel
Ethylene Propylene (EPDM) or Fluorocarbon (FKM) O-Rings: , J Nitrile, J EPDM, or J FKM
O-rings): -40 to 149°C (-40 to 300°F) Seal Bushing
Optional Low Ambient Temperature Construction: 667 Sizes 30i- 60i: J Brass
-60 to 82_C (-72 to 180_F). Optional side mounted 667 Sizes 70i - 76i: J Glass-filled PTFE or J Brass
handwheel allowed. Stem Connector: Zinc-plated steel
This construction is suitable for cold climate regions Yoke
and compliant to GOST 15150, however, when Sizes 30i - 76i: Cast iron only
ambient temperature is below -50_C (-58_F), it is not
advised to operate the handwheel. Note that current Stem and Yoke Boss Diameters
SIL certification is only relevant for standard
See table 2
temperature construction. Contact your Emerson
sales office for details.
Maximum Valve Packing Box Temperature: 427_C Approximate Weight
(800_F) with cast iron yoke See table 3
1. The pressure and temperature limits in this bulletin and in any applicable standard or code limitation should not be exceeded.
2. Do not exceed the thrust limits in this bulletin.
Contents Tables
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Additional Specifications . . . . . . . . . . . . . . . . . . . . . . . 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Volumetric Casing Displacement . . . . . . . . . . . . . . . . 5
Available Configurations . . . . . . . . . . . . . . . . . . . . . . . 3 Approximate Actuator Weights (w/o handwheel) . . 6
Integral Instrument Mount . . . . . . . . . . . . . . . . . . . . . 3 Thrust Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Handwheel Specifications . . . . . . . . . . . . . . . . . . . . . . 9
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . 11 Adjustable Travel Stop Styles . . . . . . . . . . . . . . . . . . . 9
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2
Product Bulletin
657 and 667 Size 30i - 76i 61.1:657 Size i
D104018X012 April 2020
Direct Action
All 657 actuators are direct acting. Applying air
Accessories
pressure to the upper diaphragm casing forces the Handwheels
actuator stem downward. When this pressure is
reduced, the opposing spring force moves the Handwheels for diaphragm actuators are often used as
actuator stem upward. Should the loading pressure adjustable travel stops. They also provide a ready
fail, the spring forces the stem to the extreme upward means of positioning the control valve in an
position. This provides fail-open action for emergency. The specifications in tables 6 and 7 apply
push-down-to-close valves and fail-closed action for to handwheels on both 657 and 667 actuators. For
push-down-to-open valves. repeated or daily manual operation, the unit should be
equipped with a side-mounted handwheel.
657—A direct-acting actuator used on sliding-stem Top-Mounted Handwheels—Typical 657 and 667
valves. Available in sizes 30i through 70i. See figure 1. actuators with handwheels mounted on the
diaphragm casing are shown in figure 5. On the 657
657-4—A 657 actuator in size 70i, designed with 102 actuator, the handwheel can be set to limit the travel
mm (4-inch) travel. in the upward direction; on the 667 actuator, travel in
the downward direction can be restricted. A P-2 travel
stop (figure 5) is available for a 667 actuator, sizes
Reverse Action 45i-60i to limit travel in either the upward or
downward directions. An actuator with a P-2 travel
All 667 actuators are reverse acting. Applying air stop is limited to a maximum travel of 19mm (0.75
pressure to the lower diaphragm casing forces the inch).
actuator stem upward against the opposing spring
force. When this loading pressure is reduced, the Clockwise rotation of the handwheel on the 657
spring moves the actuator stem downward. Should actuator moves the actuator stem downward,
the loading pressure fail, the spring forces the stem to compressing the spring. Spring action returns the
the extreme downward position. These actuators stem as the handwheel is turned counterclockwise.
provide fail-closed action for push-down-to-close With the 667 actuator, counterclockwise rotation
valves and fail-open action for push-down-to-open moves the stem upward, and spring action returns the
valves. stem on clockwise rotation.
Side-Mounted Handwheels—Figure 3 shows the
667—A reverse-acting actuator used on sliding-stem side-mounted handwheels (designated by the letters
valves. Available in sizes 30i through 76i. See figure 1. MO) available in sizes 34i through 60i on 657 and 667
actuators. Size 30i actuators do not have a
667-4—A 667 actuator in size 70i, designed with 102 side-mounted handwheel available.
mm (4-inch) travel.
All side-mounted handwheels can be used to stroke
the valve in either direction at any point in the actuator
stem travel. Unlike the top-mounted handwheel, the
side-mounted handwheel can be positioned to limit
travel in either direction, but not both at the same
Integral Instrument Mount time. With the handwheel in the neutral position,
automatic operation is possible throughout full valve
Fisher 657 and 667 size 30i through 76i actuators travel. In any other position, valve travel will be
feature an integral mounting pad for the DVC2000 and restricted. The handwheel is furnished with a
DVC6200 (see figure 1). Only a few parts are required spring-loaded ball detent which prevents vibration
to mount these FIELDVUE instruments to the size i, from changing the setting.
resulting in a fast and simple mounting procedure.
3
Product Bulletin
61.1:657 Size i 657 and 667 Size 30i - 76i
April 2020 D104018X012
the up, down, or up and down directions. Figure 7 transmitters, air relays, volume boosters, switching
illustrates the different constructions. Table 5 defines valves, lockup valves, limit switches, and solenoid
availability of the different style constructions with valves are also available for actuator mounting. They
actuator type and use. are described in separate publications. Contact your
Emerson sales office for details.
Other
Accessories such as transducers, positioners, position
DIAPHRAGM
DIAPHRAGM
PLATE
ACTUATOR SPRING
ACTUATOR STEM
SPRING SEAT
SPRING ADJUSTOR
STEM CONNECTOR
INTEGRAL
TRAVEL INSTRUMENT PAD
INDICATOR DISK
TRAVEL
INDICATOR DISK
INDICATOR SCALE
X1185 X1177
4
Product Bulletin
657 and 667 Size 30i - 76i 61.1:657 Size i
D104018X012 April 2020
X1178 X1214
Table 1. Volumetric Casing Displacement for Fisher 657 and 667 Actuators
CLEARANCE TRAVEL, mm
ACTUATOR
VOLUME(1) 11 16 19 29 38 51 76 102
SIZE
cm3 Casing Volume(2), cm3
30i 540 918 1080 1180 --- --- --- --- ---
34i and 40i 934 1470 1700 1850 2330 2790 --- --- ---
45i and 50i 1560 --- 2790 3000 3720 4420 5410 --- ---
46i, 60i, and 76i(3) 2180 --- 3880 4210 5280 6340 7740 --- ---
70i 3490 5240 5950 6420 7830 9240 11110 14880 18570
TRAVEL, INCH
Inch3 0.4375 0.625 0.75 1.125 1.5 2 3 4
Casing Volume(2), Inch3
30i 33 56 66 72 --- --- --- --- ---
34i and 40i 57 90 104 113 142 170 --- --- ---
45i and 50i 95 --- 170 183 227 270 330 --- ---
46i, 60i, and 76i(3) 133 --- 237 257 322 387 472 --- ---
70i 213 320 363 392 478 564 678 980 1133
1. Clearance volume indicates casing volume at zero travel.
2. Includes clearance volume.
3. For 667i only.
5
Product Bulletin
61.1:657 Size i 657 and 667 Size 30i - 76i
April 2020 D104018X012
6
Product Bulletin
657 and 667 Size 30i - 76i 61.1:657 Size i
D104018X012 April 2020
Table 4. Thrust Capabilities(1) by Input Signal Range Figure 3. Typical Side-Mounted Handwheel
THRUST
PRESSURE RANGE TO CAPABILITIES
TRAVEL ACTUATOR ACTUATOR DIAPHRAGM(2)
SIZE 657 667
mm Bar N
0.2-1 2250 1840
30i
0.4-2 3890 3270
19
0.2-1 3380 3380
34i
0.4-2 5830 5530
0.2-1 3380 2760
40i
0.4-2 5530 3680
0.2-1 4670 4670
29 45i
0.4-2 8410 8870
0.2-1 6940 6250
46i
0.4-2 13190 11800
0.2-1 5140 3740
50i
0.4-2 8410 7010
38
0.2-1 6940 4860
60i X1213
0.4-2 13190 8330
0.2-1 7830 7830
51 70i
0.4-2 18590 13700
Inch Psig Lb Figure 4. Typical Side-Mounted Handwheel for Fisher
30i
3-15 506 414 657 and 667 Actuators
6-30 874 736
0.75
3-15 759 759
34i
6-30 1311 1242
3-15 759 621
40i
6-30 1242 828
3-15 1050 1050
1.125 45i
6-30 1890 1995
3-15 1560 1404
46i
6-30 2964 2652
3-15 1155 840
50i
6-30 1890 1575
1.5
3-15 1560 1092
60i
6-30 2964 1872
3-15 1760 1760
2 70i
6-30 4180 3080
1. For size 76i 667 actuators, contact your Emerson sales office.
2. Consult Fisher 657 and 667 instruction manuals (D100306X012, D100307X012,
D100310X012, and D100311X012) for additional information on maximum pressure
limitations. 667 SIZES 34i THROUGH 60i
W0369-2
W0368-2
7
Product Bulletin
61.1:657 Size i 657 and 667 Size 30i - 76i
April 2020 D104018X012
X1332
40A38A1211-E
40A8764-E
8
Product Bulletin
657 and 667 Size 30i - 76i 61.1:657 Size i
D104018X012 April 2020
9
Product Bulletin
61.1:657 Size i 657 and 667 Size 30i - 76i
April 2020 D104018X012
Table 8. Dimensions
ACTUATOR SIZE
DIMENSION
30i 34i 40i 45i 46i 50i 60i 70i 76i
REFERENCE
mm
657, -4 0 25 25 38 38 38 38 38 ---
B
667, -4 38 38 38 38 38 38 38 38 38
C 289 333 333 406 473 406 473 536 473
D 54 54 71 71 71 90 90 90 90
657 440 498 548 659 656 722 722 840 ---
657-4 --- --- --- --- --- --- --- 994 ---
657MO(1) 440 498 548 659 656 722 722 --- ---
E
667 478 573 594 768 748 784 784 933 881
667-4 --- --- --- --- --- --- --- 1070 ---
667MO(1) 478 573 594 768 748 784 784 --- ---
657 121 164 164 202 202 202 202 313 ---
Hc
667 119 121 137 159 159 159 159 286 159
Hs --- 284 286 375 375 378 378 292 222
Jc 171 222 222 222 222 222 222 356 356
Js --- 305 305 356 356 356 356 432 432
657, -4 213 222 272 291 291 354 354 406 ---
K
667, -4 194 224 244 310 310 325 325 375 375
657, -4 --- 226 248 306 306 370 370 446 ---
M
667, -4 --- 214 248 362 362 378 378 446 446
Inches
657, -4 0.00 1.00 1.00 1.50 1.50 1.50 1.50 1.50 ---
B
667, -4 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50
C 11.38 13.12 13.12 16.00 18.62 16.00 18.62 21.12 18.62
D 2.125 2.125 2.8125 2.8125 2.8125 3.5625 3.5625 3.5625 3.5625
657 17.31 19.62 21.56 25.94 25.81 28.44 28.44 33.06 ---
657-4 --- --- --- --- --- --- --- 39.12 ---
657MO 17.31 19.62 21.56 25.94 25.81 28.44 28.44 --- ---
E
667 18.81 22.56 23.38 30.25 29.44 30.88 30.88 36.75 34.70
667-4 --- --- --- --- --- --- --- 42.12 ---
667MO 18.81 22.56 23.38 30.25 29.44 30.88 30.88 --- ---
657 4.75 6.44 6.44 7.94 7.94 7.94 7.94 12.31 ---
Hc
667 4.69 4.75 5.38 6.25 6.25 6.25 6.25 11.25 6.25
Hs --- 11.19 11.25 14.75 14.75 14.88 14.88 11.50 11.50
Jc 6.75 8.75 8.75 8.75 8.75 8.75 8.75 14.00 8.75
Js --- 12.00 12.00 14.00 14.00 14.00 14.00 17.00 17.00
657, -4 8.38 8.75 10.69 11.44 11.44 13.94 13.94 16.00 ---
K
667, -4 7.62 8.83 9.62 12.19 12.19 12.81 12.81 14.75 14.75
657, -4 --- 8.88 9.75 12.06 12.06 14.56 14.56 17.56 ---
M
667, -4 --- 8.44 9.75 14.25 14.25 14.88 14.88 17.56 17.56
1. MO = Manual operator.
10
Product Bulletin
657 and 667 Size 30i - 76i 61.1:657 Size i
D104018X012 April 2020
Jc
Hc
B
E
JS
K
K M
GE79206_Rev1
D
HS
657, 667, 657-4, AND 667-4
657 AND 667, 657, 667, 657-4, AND 667-4
SIZES 30i THROUGH 76i (667)
SIZES 34i THROUGH 60i SIZES 70i AND 76i (667)
Ordering Information
When ordering, specify: Actuator
Be sure to specify: actuator type number; whether a
Application top-mounted handwheel is required; and whether an
1. On-off or throttling service adjustable up or down travel stop is required. Refer to
the Specifications section. Review the information
2. Input signal range under each specification and in the referenced tables
3. Maximum supply pressure and figures. Specify the desired choice wherever there
is a selection to be made.
4. Valve body type and size with which the actuator
will be used
5. Valve plug travel Valve Body, Instruments, and
6. Actuator thrust required with actuator stem both Accessories
fully retracted and fully extended
Refer to the separate valve body bulletin, instrument
7. Stroking time requirements, if critical
bulletins, and bulletins covering accessories for
8. Ambient temperature range ordering information.
11
Product Bulletin
61.1:657 Size i 657 and 667 Size 30i - 76i
April 2020 D104018X012
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher, FIELDVUE, and easy-e are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson
Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their
respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
E
122015, 2020 Fisher Controls International LLC. All rights reserved.
Product Bulletin
3582 and 3582i Positioners 62.1:3582
D200062X012 November 2019
www.Fisher.com
Product Bulletin
62.1:3582 3582 and 3582i Positioners
November 2019 D200062X012
Specifications
Note: Specifications for 3582 positioners include Maximum Steady-State Air Consumption(2)
3582A, 3582C, 3582D, 3582G, and 3582NS unless 3582:
otherwise indicated 1.4 bar (20 psig) Supply: 0.38 normal m3/hr (14.0 scfh)
2.0 bar (30 psig) Supply: 0.48 normal m3/hr (18.0 scfh)
2.4 bar (35 psig) Supply: 0.54 normal m3/hr (20.0 scfh)
Available Configurations
3582i:
Refer to Type Number Description on page 7 1.4 bar (20 psig) Supply: 0.46 normal m3/hr (17.2 scfh)
2.0 bar (30 psig) Supply: 0.57 normal m3/hr (21.4 scfh)
2.4 bar (35 psig) Supply: 0.64 normal m3/hr (23.8 scfh)
Input Signal
Maximum Supply Air Demand(2)
3582
J 0.2 to 1.0 bar (3 to 15 psig), J 0.4 to 2.0 bar 1.4 bar (20 psig) Supply: 4.4 normal m3/hr
(6 to 30 psig), or J split range, see table 2. (164.5 scfh)
3582i 2.0 bar (30 psig) Supply: 6.7 normal m3/hr
4-20 mA DC constant current with 30 VDC maximum (248.5 scfh)
compliance voltage, can be split range, see table 2. 2.4 bar (35 psig) Supply: 7.7 normal m3/hr
(285.5 scfh)
2
Product Bulletin
3582 and 3582i Positioners 62.1:3582
D200062X012 November 2019
Specifications (Continued)
Operative Temperature Limits(1) Hazardous Area Classifications for 3582
Standard Construction 3582 valve positioners comply with the requirements
3582 and 3582i: -40 to 71_C (-40 to 160_F) of ATEX Group II Category 2 Gas and Dust
3582NS: -40 to 82_C (-40 to 180_F) with EPDM
elastomers Ex h IIC Tx Gb
High-Temperature Construction(3) Ex h IIIC Tx Db
3582A and C Only: -18 to 104_C (0 to 220_F) without
Maximum surface temperature (Tx) depends on
gauges
operating conditions
Electrical Classification for 582i Gas: T4, T5, T6
CSA— Intrinsically Safe, Explosion-proof, Type n, Dust: T85...T104
Dust-Ignition proof, Division 2,
FM—Intrinsically Safe, Explosion-proof, Type n,
Non-incendive, Dust-Ignition proof, Meets Customs Union technical regulation TP TC
ATEX—Intrinsically Safe, Type n, Flameproof 012/2011 for Groups II/III Category 2 equipment
IECEx—Intrinsically Safe, Type n, Flameproof (Gas II Gb c T*X
Atmospheres Only) III Db c T*X
Note: These classifications also apply to the 3582i
Note: These ratings do not apply to the 3582i
positioner
positioner
Housing Classification for 582i
CSA—Type 3 Encl. Construction Materials
FM—NEMA 3, IP54
ATEX—IP64 Refer to table 3
IECEx—IP54
Mount instrument with vent on the side or the Pressure Gauges
bottom if weatherproofing is a concern. 40 mm (1.5 inch) diameter with plastic case and brass
Note: These classifications also apply to the 3582i connection
positioner J triple scale (PSI, MPa, and bar) or
J dual scale (PSI and kg/cm2)
Other Classifications/Certifications for 582i
CUTR— Customs Union Technical Regulations (Russia,
Kazakhstan, Belarus, and Armenia) Pressure Connections
INMETRO— National Institute of Metrology, Quality, 1/4 NPT internal
and Technology (Brazil)
KGS— Korea Gas Safety Corporation (South Korea)
NEPSI— National Supervision and Inspection Centre Electrical Connection for 3582i
for Explosion Protection and Safety of 1/2-14 NPT conduit connection
Instrumentation (China)
Contact your Emerson sales office for
classification/certification specific information Maximum Valve Stem Travel
Note: These classifications also apply to the 3582i 105 mm (4.125 inches); adjustable to obtain lesser
positioner travel with standard input signal
- continued -
3
Product Bulletin
62.1:3582 3582 and 3582i Positioners
November 2019 D200062X012
Specifications (Continued)
Characterized Cams Options
See characterized cams section J Instrument, output, and supply pressure gauges;
automotive tire valves; or pipe plugs (see Type
Number Description section) J Bypass valve (only for
Approximate Weight direct-acting, 3582 positioners using a full input
3582: 2.5 kg (5-1/2 pounds) signal range) J Characterized cams B and C
3582i: 3.6 kg (8 pounds) J Connectors for diagnostic testing J High vibration
NOTE: Specialized instrument terms are defined in ANSI/ISA Standard 51.1 - Process Instrument Terminology.
1. The pressure and temperature limits in this document and any applicable standard or code limitation should not be exceeded.
2. Normal m3/hr--normal cubic meters per hour (0_C and 1.01325 bar absolute); Scfh--standard cubic feet per hour (60_F and 14.7 psia).
3. Not available with bypass or pressure gauges.
4
Product Bulletin
3582 and 3582i Positioners 62.1:3582
D200062X012 November 2019
60 Ohms
5.6V 5.6V 5.6V
60 Ohms
21B2335-D
W8152 A6012
5
Product Bulletin
62.1:3582 3582 and 3582i Positioners
November 2019 D200062X012
Figure 3. Fisher 582i Electro-Pneumatic Converter Figure 4. Fisher 3582 Pneumatic Valve Positioner
Mechanism BYPASS
LEVER
ADJUSTING
NOZZLE
SCREW BELLOWS
ROTARY
SHAFT
ARM
OPERATING
CAM
FLAPPER SCREENED
W6120
VENT
W6366
6
Product Bulletin
3582 and 3582i Positioners 62.1:3582
D200062X012 November 2019
7
Product Bulletin
62.1:3582 3582 and 3582i Positioners
November 2019 D200062X012
RELAY
INSTRUMENT
BELLOWS
PIVOT
ACTUATOR
VALVE STEM NOZZLE
CONNECTION
FLAPPER
INPUT AXIS
CAM
22A7965-A
A2453-2
BEAM REVERSE ACTION QUADRANT
4-20 MILLIAMPERE -
INPUT SIGNAL +
PNEUMATIC SIGNAL
FROM CONVERTER
BELLOWS
582i
CONVERTER
FEEDBACK
SUPPLY AXIS
OUTPUT TO NOZZLE
ACTUATOR BEAM
RELAY
DIRECT ACTING
QUADRANT
ROTARY
SHAFT ARM INPUT AXIS
CAM
PIVOT
REVERSE ACTING
FLAPPER ASSEMBLY QUADRANT
A4818-2
8
Product Bulletin
3582 and 3582i Positioners 62.1:3582
D200062X012 November 2019
POSITIONER
POSITIONER
REVERSE
ACTING
ACTING
DIRECT
VALVE PLUG AT CONSTANT
PRESSURE DROP
Because 3582 positioners mount the same way on
either direct-acting or reverse-acting diaphragm CK4835-A
A1415-1
20
20
PERCENT INSTRUMENT PRESSURE SPAN
CAM CAM
30 C A
30 CAM
40 CAM B
A 40
50 CAM
B 50
60
60 CAM
CAM A
70 C
70 CAM
B
80
80
90 NORMALLY
90 OPEN
100 VALVE
100
POSITIONER
POSITIONER
PERCENT FLOW
POSITIONER
ACTING
ACTING
DIRECT
0 PERCENT CORRESPONDS TO
REVERSE
ACTING
ACTING
DIRECT
CK4832-A
A1413
CK4833-A
A1414
9
Product Bulletin
62.1:3582 3582 and 3582i Positioners
November 2019 D200062X012
6. Input signal
Application Construction
1. Positioner type number. When ordering a 3582i
electro-pneumatic positioner, specify: J supply and Refer to the specifications. Carefully review each
output pressure gauges, J automotive tire valves, specification; indicate your choice whenever a
or J pipe plugs selection is offered.
10
Product Bulletin
3582 and 3582i Positioners 62.1:3582
D200062X012 November 2019
Figure 10. Valve Positioner Dimensions and Connections (see table 4 for the X dimension)
1/2-14 NPT
CONDUIT
CONN
11.44
30_ MAX (291)
30_ MAX
3/8-18 NPT
VENT CONN
1/4-18 NPT
OUTLET CONN 1/4-18 NPT 1/4-18 NPT
OUTPUT CONN 1/4-18 NPT
11B6519-G
PLUGGED SUPPLY CONN OPTIONAL OUTPUT
FISHER 3582i CONN PLUGGED
141 140
CL OF ACTUATOR (5.50)
(5.56) 0.34 ∅ HOLES
SPACED 0.69 57.2
127
APART (2.25)
(5.00)
X 12.7
261 7.9 (0.50)
(10.26) (0.31)
1/4-18 NPT
INSTR CONN
30_ MAX
205
(8.06)
30_ MAX
3/8-18 NPT
1/4-18 NPT VENT CONN
OUTLET CONN
PLUGGED 1/4-18 NPT 1/4-18 NPT
SUPPLY CONN OUTPUT CONN
11B6520-F FISHER 3582
B2211-3
(DIMENSIONS FOR 3582A, C, D, AND G ARE THE SAME) mm
(INCH)
Table 4. Dimensions
X
STEM TRAVEL
9.5 mm (0.375 inch) Stem 12.7 mm (0.50 inch) Stem 19.1 mm (0.75 inch) Stem
mm Inch mm Inch mm Inch mm Inch
29 or less 1.125 or less 81 3.19 87 3.44 100 3.94
38 1.50 90 3.56 97 3.81 109 4.31
51 2 102 4.00 108 4.25 121 4.75
64 2.50 113 4.44 119 4.69 132 5.19
76 3 124 4.88 130 5.12 143 5.62
89 3.50 135 5.31 141 5.56 154 6.06
102 4 146 5.75 152 6.00 165 6.50
11
Product Bulletin
62.1:3582 3582 and 3582i Positioners
November 2019 D200062X012
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher and FlowScanner are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson
Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their
respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
E
121989, 2019 Fisher Controls International LLC. All rights reserved.