Professional Documents
Culture Documents
Mechanical Behaviour of Materials - Iv-Btech - Mid Ii Exam
Mechanical Behaviour of Materials - Iv-Btech - Mid Ii Exam
0/1
MECHANICAL BEHAVIOUR OF 2. What is the nature of the curve of a viscous creep?
ROLL NUMBER
1/1
temparature
SECTION time
A cycle
None of above
HCF
Impact strength
LCF
fatigue strength
Option 5
All of the above
12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM 12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM
5.Nabarro-Herring creep predicts a strain rate which is a function of _____ 1/1 8.Notch of fatigue strength is depends on 1/1
D type of load
D-2 application
6.Which of the following isn’t a stage of creep? 0/1 9.Low cycle fatigue is used for 1/1
Primary turbines
Correct answer
Tertiary
10.According to miners rule, the mean stress is 0/1
1.5
7.Mechanical pre stressing is used for 1/1
1.2
gear 1
spring 0
11.After which point is necking observed? 1/1 14.Which of the theory is related to brittle fracture? * 1/1
12.Which of the following is not a mode of application of force for crack 1/1 15.Notch sensitivity factor for ductile materials * 1/1
propagation?
0.85
rolling mode
0.72
sliding mode
1
tearining mode
0.92
openining mode
fatigue 0.55
12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM 12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM
17.Grain size effect was clearlly observed in * 1/1 20.According to miners rule, the mean stress is * 1/1
HCF 0.85
LCF 0.75
18.Fatigue performance improved by * 1/1 21. Diffusion creep is a type of creep. The slope of a strain-time graph *1/1
increases with the ______________in temperature.
Nitriding
Increses
flame hardening
decreses
carburizing
constsnt
All of the above
all of the above
Aluminium
Grain boundary
steel
slip
copper
twinning
alloy
all of the above
Correct answer
Correct answer
alloy
all of the above
23.In _____ creep, atoms diffuse along grain boundaries and grains *1/1 26.Fatigue crack nucleation form in twin boundaries are * 1/1
elongate in stress axis.
hexogon
dislocations
square
corle
circle
narrow bong
all of the above
all of the above
1
increses
0.58
decreses
0.62
constant
0.95
all of the above
12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM 12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM
fatigue
creep
fracture
increses
decreses
constant
Correct answer
Forms
12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM 12/24/22, 11:37 AM MECHANICAL BEHAVIOUR OF MATERIALS_IV-BTECH_ MID II EXAM