Professional Documents
Culture Documents
ABTEC A2 Audio Analyzer Introduction
ABTEC A2 Audio Analyzer Introduction
High-Performance
Key Function Measurement Item(Section)
● Level & Gain &Phase
• Powerful and Perfect Audio Test
● Level Ratio
• Support WIFI/Bluetooth Audio Test
• Frequency Response
• Support HDMI/SPIDF/AES/EBU/ASIO
● THD+N
• Signal-to-Noise Ratio
• Auto test,Comprehensive test in 3s
• Noise
• Support LabVIEW,VB.NET,C#.NET
• Crosstalk
• Auto Create and Save Test Report
• Interchannel Phase
• Measurement Recorder
• CMRR
A2 Audio Analyzer connect with PC via USB,it
● Multi-tone Analyzer
Specifications
Analogy Analyzer Performance
System Performance
Maximum Rated Input Voltage: 230Vpk
Residual THD+N(20 kHz BW): -105 dB
Maximum Bandwidth: >90kHz
Analogy Generator Performance
IMD Measurement Capability:
Sine Frequency Range:0.1Hz至80.1kHz
SMPTE,MOD,DFD
Frequency Accuracy:3ppm
Amplitude Accuracy(1kHz): ±0.05dB
IMD Test Signals:SMPTE,MOD,DFD
Amplitude Flatness(20 Hz-20kHz): ±0.01dB
Maximum Amplitude(Balanced):16Vrms
Residual Input Noise(20kHzBW): 1.3μV
Amplitude Accuracy: ±0.05 dB
Individual Harmonic Analyzer: d2-d10
Flatness(20Hz-20 kHz): ±0.01dB
Max FFT length: 1024K points
Digital Signal Source/Analyzer Performance
Support DC Voltage Measurement
Digital Output Simpling Rate:
Dimensions(W*D*H):425*307*89 mm
22kS/s--216kS/s
Weight : 5 kg
Bit Depth:24bit Power Supply: 100-240V / 90W 50-60Hz
Residul Dither:1.5ns
fect。Mechanical defects,such as
or manual detection。
Main Functions
SPL/THD measurement
PESQ is a widely used, enhanced perceptual measurement for voice quality in tele-
communications. It is licensed from OPTICOM GmbH and forms the basis of ITU-T Rec-
ommendation P.862. PESQ is specifically designed for testing voice quality on low band-
width devices, like mobile phones and smartphones.
reliable.
Codecs Supported:mSBC、SBC、aptX、CVSD