Professional Documents
Culture Documents
2022 23 Foredom Catalog Web 1
2022 23 Foredom Catalog Web 1
2022-2023
www.foredom.net
Flex Shat Motors: Bench Lathes and Grinders By Handler Manufacturing 46-47
- SR Motor + Speed Control Combination - Hang up and Bench Style 4 Polishers and Trimmers By Handler Manufacturing 48-49
- SR Speed Control 5
- TX Motors + Speed Control Combination - Hang up and Bench Style 6 Dust Collection
- LX Motors + Speed Control Combination - Hang up and Bench Style 7 - Filter Hood 50
Tools
- TX and LX Speed Control 8 - Fishmouth 50
- On/Off Foot Switch 8 - Dust Hood 50
- MADC20 Cyclone & Collection Chamber 52
Handpieces
Key Tip Handpieces 9-11 Lighted and Jumbo Work Chamber 51
- General Use and 3-Jaw Chuck 9 Mobile Work Station 53
- Quick Change and Special Use 10
Dust Collection and Splash Hoods by Handler Manufacturing 54-55
- Duplex Spring and Adapters 11
Safety Products - Products for Protection and Visibility 56
Square Drive Handpieces 12
Rotary Accessories
Slip Joint Handpieces - Chuck Style, Collet Style and Quick Change 13
- Assortment Kits 57, 72
SR Motor Sets 14 - Shank Mounted Points 58
TX Motor Sets 15 - CeramCut Blue Stones 59
- Aluminum Oxide Abrasives 60
LX Motor Sets 15 - Plated Diamond Points 61
Motor Sets - Non-Conductive Shafting - 115V and 230V 16 - Diamond, Ruby and Other Abrasives 62
- Silicone Abrasive Mounted Points 63-64
Jewelers Kits 17-19 - Silicone Abrasive Unmounted Wheels 64
- SR Motor Jewelers Kits 17 - Rubber Abrasive Mounted Points 65
- TX Motor Jewelers Kits 18 - Unmounted - Cut Off Wheels, Disks and Brushes 66
- LX Motor Jewelers Kits 18 - Steel Step Drills 67
- Power Graver 18 - Carving Drills and Twist Drills (PRIMO®) 67
Additional Jewelers Kits - with SR, TX and LX Motors 19 - Hobby Grade Miniature Twist Drills 68
Woodworking Kits 20-21 - Assorted Abrascotch Non-woven mounted Abrasives 74
- SR Motor Woodworking Kits 20 - Mini Brushes - Vlies and Pli Brushes 74
- Additional Woodworking Kits - SR, TX and LX Motors 21 - Unitized and Satin Finishers 74
- Mounted Brushes - 3/32" and 1/8" Shank 75
Chisel Carving Kit 21 - Mounted Polishing Accessories 76-77
General Use Kits 22 Burs
- Carbide and Engraving Burs 68
Accessories
Wax Carver 43 Motor + Speed Control Combinations Include : Motor + Shafting + Speed Control
(Accessories and Handpiece sold separately). Pages 4-8.
Rotary Tumbler 43
Sets Include: Motor + Speed Control + Shafting + Handpieces (Accessories sold separately). Pages 15-16
Foredom Bench Lathe Kits Include: Motor + Shafting + Speed Control + Handpiece + Accessories. Page 17-22
- Sold Individually and Various Kits 44
Details about ordering, warranty policies and
- Tapered Spindles, Collet Holder, Chuck Arbor 45
- Mandrels, Adapters and Flexade 45 i contacting us are on page 98.
- Replacement Parts 45
What Makes Up A Foredom Flex Shaft Tool?
1- Motor Type and Speed Control + 2-Flex Shaft + 3-Handpiece
Foredom has Kits, Sets and Combinations to take the guesswork out of finding what works for you.
Motor Combinations Include : Motor + Shafting + Speed Control. Pages 4-8. (Accessories and Handpiece sold separately).
Sets Include: Motor + Speed Control + Shafting + Handpieces Pages 14-16. (Accessories sold separately).
Kits Include: Motor + Shafting + Speed Control + Handpiece + Accessories. Page 17-22.
Max Speed 18,000 RPM 15,000 RPM 5,000 RPM 2,800 RPM
Flex Shaft Motor
21CE, C.FCT-22CE
115V & 230V Single Phase 115V & 230V Single Phase 115V & 230V Single Phase
Voltage‡ 115V ONLY Single Phase
(See ‡ note) (See ‡ note) (See ‡ note)
115VAC: 1.7 Amps
115VAC: 3.5 Amps 115VAC: 1.2 Amps 115VAC: 1.2 Amps
Amp 230VAC: .9 Amps
230VAC: .6 Amps 230VAC: .6 Amps
Key Tip – standard Square Drive – heavier Slip Joint – European PowerGraver Sheath
– unique PowerGraver shaft notch
for the Motors listed above
85% of Foredom Flexible Shaft Machines Foredom motors equipped with square drive Slip Joint Shafts are mostly used in The PowerGraver is in a class of its
use a 39" long Key Tip Shaft. Foredom shafts and thicker protective sheaths have a Europe. Foredom motors equipped with own! It uses a standard 39" Key Tip
offers 19 handpieces to fit these shafts. letter ‘H’ added to the model name (SRH or Slip Joint Shafts and sheaths have a letter Inner Shaft (p/n S-93) but requires a
Flexible Shafts
Key Tip shafts are made to handle most TXH, etc.). The motor is identical. Square ‘J’ added to the model name (SRJ or LXJ, unique Neoprene Outer Sheath (p/n
types of work from jewelry fabrication and drive shafting is thicker, less flexible, usually etc.). The motor is identical. Since Fore- S-76N) for Connecting to a H.9D Pow-
woodcarving to industrial use. A Foredom 63" long and can connect to 5 Square Drive dom motors are used worldwide we offer erGraver Handpiece. As listed above,
motor is built to industrial standards and handpieces. Few applications require square shafting with this European-style connection it has 1/20 horsepower and runs at a
when compared to a hand-held grinder drive shafting with a torsional breaking point of method and a choice of 7 handpieces that maximum speed of 2,800 RPM.
or other Dremel®-type rotary tools, it 50 in.-lb. (compared with 24 in.-lb. for key tip connect with the slip joint.
consistently offers more power and shafting). For unusually large or difficult jobs,
performance. square drive shafting may be a good choice. For use on
For use on For use on For use on the Power
SR, TX, and SR, TX, and SR, TX, and Graver
2
Key Tip Shafting is compatible with Square Drive Shafting is compatible with Slip Joint Shafting is compatible with the PowerGraver Shafting is compatible with
the following Key Tip Handpieces: the following Square Drive Handpieces: following Slip Joint Handpieces: the following Handpieces:
Compatible
Handpiece
General Purpose: Page 9 Page 12 Page 13 This is the ONLY Shafting for the Power
H.30, H.30-C2, H.44T, H.44T-E, H.43T, H.28H, H.30H, H.43HT, H.44T, H.25H H.30SJ, H.8SJ, H.28SJ, H.44TSJ, Graver Handpiece H.9D. Page 18
H.28, H.8 H.20SJ, H.18SJ, H.15SJ
However all other KEY TIP Handpieces will
Quick Change: Page 10 work on the Power Graver Shafting
H.18, H.20, H.10
Special Use: Page 10
H.25, H.50, H.15
3
Powerful – 1/6 HP, ball bearing Series SR and SRH run up to 18,000 RPM with the Speed Controls for Series SR Motors – are on page 5.
power needed to accomplish most jobs on nearly any material – without stalling or *Some Bench-top models come with built in speed control
slowing down while under normal load.
Shafting – Different length shafting (shafts & sheaths), including non-conductive,
Reversible – for symmetry, left-handed users and maximizing longevity and various lengths and slip joint versions are available separately, see page 24-25.
usefulness of many rotary accessories. Not all rotary tools can run in reverse.
Handpieces –
Durable – Foredom motors and speed controls have a 2-year warranty and can last Key Tip shafting. Pages 9-11.
for decades. Supplies to maintain them are on pages 23-26. Square Drive Shafting. Page 12 .
M.SR - Hang-up Motor with Speed Control M.SRH - Hang-up Motor with Speed Control
Combinations with standard 39" long key tip Combinations with square drive 63" long,
shafting square drive shaft and heavier sheath
M.SRB - Bench Style with Speed Control M.SRBH - Bench Style with Speed Control
Combinations with standard Combinations with square drive 63" long,
39" long key tip shafting square drive shaft and heavier sheath
C.FCT-1 $44.44
115 V, 4 Amp, 60 Hz*
C.FCH-2 $44.44 C.FCT-21CE $86.48
230 V, 3 Amp, 50 Hz United Kingdom - 230 V, 3 Amp, 50 Hz
7-1/4" long, 4-1⁄2" wide, 2-1/2" high C.FCT-22CE $86.48
2 lb/1 kg packaged weight Continental European - 230 V, 3 Amp, 50 Hz
M.TX - Hang-up Motor with Speed Control M.TXH - Hang-up Motor with Speed Control
Combinations with standard Combinations with square drive 63" long,
39" long key tip shafting square drive shaft and heavier sheath
M.TXB - Bench Style with Speed Control M.TXBH - Bench Style with Speed Control
Combinations with standard Combinations with square drive 63" long,
39" long key tip shafting square drive shaft and heavier sheath
6
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Flex Shaft Motors – LX Series, Motor + Speed Control Combinations
Series LX has the most power at startup to 5,000 RPMs – its maximum speed.
Powerful – The 1/10 HP, ball bearing LX motor is a permanent magnet DC motor with Speed Controls – Permanent magnet motors require the either a C.TXR, C.SXR, or C.EMX
advanced rare earth magnets in place of wire wound fields in other motors. It is speed control. Damage will result if the motor is connected to any other control or directly
Foredom’s most powerful motor with better low-speed torque than either the M.SR or to the AC line. See Page 8.
M.TX. The LX motor’s maximum speed is 5,000 RPM. Ideal for low speed jobs like stone Shafting – Different length shafting (shafts & sheaths), including non-conductive,
setting, wax modeling, drilling and chisel carving. various lengths and slip joint versions are available separately, see page 24-25.
Durable – Foredom motors and speed controls have a 2-year warranty and can last Handpieces –
for decades. Supplies to maintain them are on pages 23-26.
Key tip shafting. Pages 9-11.
Motor – Speed Control Combination Prices are shown here. Square drive shafting. Page 12 .
*Some Bench-top models come with built-in speed control.
M.LX - Hang-up Motor with Speed Control M.LXH - Hang-up Motor with Speed Control
Combinations with standard Combinations with square drive 63" long,
39" long key tip shafting square drive shaft and heavier sheath
M.LXB - Bench Style with Speed Control M.LXBH - Bench Style with Speed Control
Combinations with standard Combinations with square drive 63" long,
39" long key tip shafting square drive shaft and heavier sheath
Foredom Permanent Magnet flexible shaft motors TX and LX require speed controls that convert AC
i current to DC. Damage will result if these motors are connected to a wall outlet or if other speed
controls – such as those for M.SR motors – are used.
C.EMX-1 $111.79
115 V, 3.5 Amp, 60 Hz for both Series TX or LX
C.EMX-2 $112.60
230 V, for Series LX Only 3 Amp, 50 Hz
-2 -21 -22 -26 -32 -34
5" long, 5-7/8" wide, 2-3/4" high North America United Kingdom Continental Australia Israel 230V Brazil
2 lb/1 kg packaged weight Europe -33
115V Brazil
C.EMXF-1 $130.49
115 V, 3.5 Amp, 60 Hz for Series TX only
H.30®
H.30® and H.30®-C2 - Foredom’s most popular handpiece, Precision geared 3-jaw #0
chuck accepts any size shank accessory or drill bit up to a 5/32"(4mm) diameter. H.30
Handpieces have permanently lubricated, shielded ball bearings, are used by most
jewelers and are versatile enough for anyone with a flex shaft motor.
A choice of bench top tools and attachments make use of the H.30 – Drill Press, 2" Angle
Grinder, Belt Sander, Wolf Wax Trimmers and Flex Shaft Handpiece Holder pages 31-33.
H.30-C2 H.30 / Silver $84.08
H.30-C2 / Blue $84.08
5-3/16" long, 1" diameter, 5.85 oz, 9.1 oz packaged weight
Includes: HPCK-0 chuck key with plastic grip.
Collet-Style Handpieces H.44T and H.43T - These COLLET-STYLE handpieces can hold burs with shank
sizes up to 1/4" in diameter. Each includes 3 different size collets, pin & wrench for
tightening and loosening.
H.44T $83.35
5-5/8" long, 1" diameter -center, 3/4" diameter -taper, 5.85 oz, 8.6 oz pkg. wt.
Includes collet sizes: 3/32" (2.35mm), 1/8" (3.18mm) & 1/4" (6.4mm) installed.
H.44T H.44T-E $85.69
Metric version of H.44T, 5-5/8" long, 1" diameter -center, 3/4" diameter -taper, 5.85 oz, 8.6 oz
or H.44T-E pkg. wt. Includes collet sizes: 6mm installed, 3mm & 2.35mm.
H.43T $85.53
4-5/8" long, 1" diameter -center, 3/4" diameter -taper, 4.9 oz, 7.75 oz pkg. wt. H.43T is
short enough to fit into some very tight spaces – like ski boots. Includes collet sizes:
3/32" (2.35mm), 1/8" (3.18mm) & 1/4" (6.4mm) installed.
H.43T
H.44T and H.44T-E can also be used in Foredom’s drill press, page 31.
More collet sizes are available in Collet Set HP440 and individually, page 27.
H.28 and H.8 - Slim, COLLET-STYLE handpieces are great for narrow areas or smaller
hands. Each includes 2 collets: 1/8"and 3/32", and a pin & wrench for tightening and
loosening.
H.28 H.28 $84.24
5-1⁄4" long, 23/32" diameter - center, 1/2" diameter -taper, 3 oz, 4.35 oz pkg. wt.
H.28 is a narrow version of H.44T.
Includes collet sizes: 3/32" (2.35mm) installed and 1/8" (3.18mm).
H.8
H.8 $128.90
6-1⁄8" long, 5/8" diameter -center, 3.55 oz, 5.1 oz pkg. wt.
H.8 has a chuck guard that slides back for collet changes.
Includes collet sizes: 3/32" (2.35mm) installed and 1/8" (3.18mm).
More collet sizes are available in Collet Set HP600 and individually, page 27.
Wrench Included with Collet Style Handpieces With a Collet Adapter you can change to a smaller shank size
$5.20 when purchased separately bur or drill without changing the collet – saving time & effort.
HP103117 1/2" Pin & Chuck Wrench Fits inside a collet and allows the use of smaller shank size accessories. $19.58 ea.
for H.44T, H.44T-E & H.43T HPL4-3233 3/32" to 1/16"
HP10588 11/32" Pin and Chuck Wrench for H.28 HPL4-3234 1/8" to 1/16"
HP10586 11/32" Wrench Assembly for H.8 HPL4-3235 3.0mm to 3/32"
HPL4-3236 1/8" to 3/32"
HPL4-3237 3.0mm to 1.6mm
9
* H.30® is a registered trademark of Blackstone Industries LLC.
Key Tip Handpieces – Quick Change & Special Use
Quick Change Handpieces: Have levers for changing burs rapidly.
Their collets hold only 2.3mm (3/32") burs. Preferred by users who make frequent bur changes.
H.10
H.10 - Slim, Quick Change handpiece’s lever rotates 180° to
insert an accessory, and locks the bur in when returned to its
original position. The H.10 requires lubrication after the first
2-3 months of continuous use. Comes with 2.35mm collet
(HP012.010) installed .
H.10 $335.14
7-3/8" long, 21/32" diameter, 4.55 oz, 5.5 oz pkg wt.
Special Use Handpieces: Extremely precise & durable for continuous production.
H.25 - All Foredom handpieces are made to industrial standards – H.25 has even
tighter tolerances. Run-out is 0.003" measured 3/4" out from end of chuck or collet.
This collet-style handpiece has aircraft-grade, double shielded ball bearings and a
heavier housing.
Other fractional and metric collets are available separately and in Collet Set
H.25 HP103000, page 27.
H.25 $198.52 5-1⁄4" long, 1-1⁄32" diameter, 7.15 oz, 9.6 oz pkg wt.
Includes collet sizes: 1/8" (3.18mm)–installed and 1/4" (6.4mm), and pin and chuck
wrench.
H.50 - Chisel: wood, plastic, plaster & soft carving stone. Reciprocating power
chisel handpiece has a stroke length of 1/8" (3.2mm) and requires only light pressure.
Textured plastic barrel & tapered aluminum front end. Use only at low speeds
H.50 (1000–8,000 RPM) in forward rotation.
Use MS10008 Handpiece Lube for periodic lubrication, page 23. Complete chisel
selection: page 92.
H.50C $99.70 with 6-Chisel Set AKHK550 (page 92)
H.50 $62.46 No Chisels 6" long, 1" diameter, 4.6 oz, 6.65 oz pkg wt.
10
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Key Tip Handpieces – Duplex Spring
Duplex Spring Handpieces provide extra flexibility for more
precise control of very delicate work.
We recommend that only experienced flex shaft users or those whose work demands
added flexibility consider this type of handpiece. The spring drive is made of special
double wound, tubular construction steel, with a protective flexible spring cover. i Duplex springs and duplex adapters should never be bent more than 30°.
Both are subject to breakage and not covered by warranty.
H.8D
H.8D has a chuck guard that slides back for collet changes. Includes collet sizes:
3/32" (2.35mm) installed and 1/8" (3.18mm) and Wrench Assembly.
H.8D $182.47 9-3/8" long, 5/8" diameter, 5.2 oz, 7.35 oz pkg wt.
H.10D H.10D Slim, Quick Change handpiece’s lever rotates 180° to insert an accessory,
and locks the bur in when returned to its original position. Favored by many stone
setters, H.10 requires lubrication after the first 2-3 months of continuous use.
Comes with 2.35mm collet (HP012.010) installed ONLY.
H.10D $365.17 10-3/4" long, 21/32" diameter, 5.95 oz, 7.4 oz pkg wt.
H.15D
H.15D Reciprocating handpiece makes a 1/32" hammer stroke. Impact force adjusts from
light to heavy by turning the silver knurled ring. Use only at low speeds (0-5,000 RPM) in
forward rotation.
H.15D $211.77 9-5/8" long, 1/4" diameter at tip, 5.2 oz, 7.15 oz pkg wt.
H.18D
H.18D Foredom’s premier Quick Change handpiece features a super slim grip and
lever that opens the collet when it is pressed and locks the collet when released.
H.18D $275.65 10-3/8" long, 19/32" diameter at tip, 5.3 oz, 6.85 oz pkg wt.
H.20D
H.20D Popular Quick Change handpiece with molded plastic front grip with tapered
sides for easy and close handling. The lever rotates 90° to insert an accessory and
locks the bur in when returned to its original position.
H.20D $140.54 10-1/8" long, 7/8" diameter at tip, 5.4 oz, 7.5 oz pkg wt.
HP775 - Key Tip Duplex Adapter converts any key tip style handpiece, including
H.30 and H.44T, into a duplex spring handpiece. Adapter works on these models:
H.30, H.30-C1, H.30-C2, H.44T, H.43T, H.28, H.8, H.10, H.15, H.18, and H.20.
HP775 NEVER use with Chisel Handpieces, Angle Grinder or Belt Sander Attachments.
HP775 $81.72 7-1/2" long, 5/8" diameter, 3 oz, 3.8 oz pkg wt.
HP776 - Slip Joint to Key Tip Duplex Adapter allows a slip joint handpiece to con-
nect to a key tip shaft, and adds a duplex spring to the handpiece. Adapter works on
these models: H.8SJ, H.28SJ. H.30SJ, H.44TSJ., H.18SJ. H.20SJ.
H.52SJ (discontinued), and H.15SJ and connects to a key tip shaft.
HP776 HP776 $133.60 8-1/2" long, 5/8" diameter, 3.8 oz, 5.2 oz pkg wt.
11
Square Drive Handpieces
For unusually large or difficult jobs, when a square drive shaft may For
be a better choice – these are the handpieces to use. Square Drive
Shafting
Foredom Motors sold with square drive shafts and thicker protective sheaths have a letter ‘H’ added to the model name (SRH or TXH, etc.) Square
drive shafting is thicker, less flexible, usually 63" long and can connect only to Square Drive handpieces.
Certain jobs may demand a torsional breaking point of 50lb-in (compared with 24lb-in for key tip shafting).
H.25H, H.30H, and H.44HT have locking rings.
Handpiece
locking
ring
Square drive Pull handpiece
tip on flex Proper connection
i
locking ring back of handpiece to
shaft and insert shaft tip Other fractional and metric collets are available separately page 27.
shaft
Collet-Style Handpieces
H.28H
H.28H - Slender, collet type with tapered front grip fits into narrow spaces.
H.28H $90.51
5-5/8" long, 23/32" diameter, 1/2" diameter at taper, 3 oz, 5 oz pkg. wt.
Includes collet sizes: 3/32" (2.35mm) installed and 1/8" (3.18mm).
H.43HT
H.43HT - Popular among woodworkers. Includes collet sizes: 3/32" (2.35mm), 1/8"
(3.18mm) & 1/4" (6.4mm) installed and pin and wrench
H.43HT $98.27 5-1/4" long, 1" diameter, 7.4 oz, 9.85 oz pkg. wt.
H.44HT
H.44HT - Includes collet sizes: 3/32" (2.35mm), 1/8" (3.18mm) & 1/4" (6.4mm) installed
and pin and wrench
H.44HT $97.70 6-1/4" long, 1" diameter, 7.4 oz, 9.85 oz pkg. wt.
H.25H H.25H - All Foredom handpieces are made to industrial standards – H.25H has even
tighter tolerances. Run-out is 0.003" measured 3/4" out from end of chuck or
collet. Collet-style handpiece has aircraft-grade, double shielded ball bearings and a
heavier housing. Plus, this one connects to a square drive shaft.
H.25H $203.72 6-1/8" long, 1-1/32" diameter, 8.7 oz, 11.35 oz pkg. wt.
Includes collet sizes: 1/8" (3.18mm)–installed and 1/4" (6.4mm), and pin and chuck
wrench.
12
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Slip Joint Handpieces – Collet Style and Quick Change
Chuck Style Handpiece Slip Joint Quick Change Handpieces
Collets hold only 2.3mm (3/32") burs which can quickly be changed with a lever.
H.30SJ - Chuck-style, precision geared 3-jaw #0 chuck with 0-4mm (5/32") capacity, i For all Quick Change handpieces, keep a bur in the
collet at all times to prevent damage to the collet.
H.30SJ Handpieces have permanently lubricated, shielded ball bearings and include
HPCK-0 chuck key with plastic grip. A choice of bench top tools and attachments be
used with the H.30SJ –page 31-33.
H.30SJ $86.00 146mm (5-3/4") long, 25.4mm (1") diameter, 183g, 271g pkg wt
Slip Joint Collet-Style Handpieces H.20SJ - Popular Quick Change handpiece with plastic front grip and tapered sides
Include metric collets and tools for tightening and loosening collets. for ease of handling. Lever rotates 90° to insert accessories and locks the bur in
when returned to its original position.
i Other fractional, metric and replacement collets are
available separately page 27. H.20SJ $115.72 152mm (6") long, 22mm (7/8") diameter, 84g, 150g pkg wt
H.8SJ -Includes 2.35mm (3/32") & 3mm collets, and chuck wrenches. 140mm (5-
1/2") long, 16mm (5/8") diameter, 99g, 132g pkg wt. Slender, collet type handpiece
with chuck guard fits into narrow spaces.
H.8SJ $137.34
H.18SJ - Foredom’s premier Quick Change handpiece has slim grip and lever that
opens the collet when it is pressed and locks the collet when released.
H.18SJ $226.52 162mm (6-3/8") long, 15mm (19/32") diameter, 102g, 139g pkg wt
H.28SJ -Includes 2.35mm (3/32") & 3mm collets, and pin & wrench. 133mm
(5-1⁄4") long, 18mm (23/32") diameter, 13mm (1/2") diameter at taper, 85g, 133g pkg
wt. Slip joint collet handpiece has tapered front grip. Special Use Handpiece
H.28SJ $85.68
H.15SJ -Reciprocating handpiece makes a 1/32" hammer stroke. Silver knurled ring
adjusts impact. Use only at low speeds (0-5,000 RPM) in forward rotation. Additional anvil
H.44TSJ -Includes 2.35mm (3/32"), 3mm & 6mm collets, and pin & wrench. points shown on page 91. Use MS10005 Handpiece Lube for periodic lubrication, page 23.
159mm (6-1/4") long, 25.4mm (1") center diameter, 19mm (3/4") taper diameter, 191g, H.15SJ $172.98143mm (5-5/8") long, 6mm (1/4") diameter at tip, 101g, 139g pkg wt
272g pkg wt. Larger collet capacity with slip joint connection can also be used in Comes with threaded anvil point and pin to tighten point.
Foredom’s drill press, page 31.
H.44TSJ $102.31
Foredom’s Slip Joint Handpieces fit on Plug Options for 230 Volt with power plugs for regions outside North America may be
ordered by adding the following numbers in red to the end of the part numbers:
European flex shaft machines with
"slip joint" connection.
Also available–Foredom motors with a slip joint connection:
UKCA & CE Compliant Hang-Up Motor with Slip Joint Shafting and
C.FCT-2CE Speed Control -2 -21 -22 Continental -26 -32 -34
North America United Kingdom Europe Australia Israel 230V Brazil
M.SRJ–21CE $330.33 (UK Plug) -33
CSA compliant or -21CE -22CE
M.SRJ–22CE $330.33 (Continental European Plug) UKCA & CE CE compliant 115V Brazil
M.SRJ-2 Motor Set with H.30SJ, Slip Joint Shaft & Speed Control Handpiece compliant Motor
End End
K.8309-2 $372.37 Slip Joint
M.SRJ-2–C.FCH-2–H.30SJ (not CE compliant) Outer Sheath
Motor
M.SRJ-2 Hang-Up Motor, C.FCH-2 Foot Control and a Slip Joint Connector
H.30SJ Chuck Handpiece (shown at left above). Motor Shaft Adapter
Inner Shaft
• Factory Pre-Lubricated Assembly.
• Components such as shaft, sheath and motor connector for Foredom slip joint style flex shaft motors.
115 volt for most usage in North America 230 volt for international use – specify power plug option
Sets with 39" Standard Key Tip Shafting Sets with 39" Standard Key Tip Shafting
Motor + Speed Control + Handpiece Set No. Price Motor + Speed Control + Handpiece Set No. Price
M.SR Hang Up Motor + Speed Control + Handpiece M.SR-2 Hang Up Motor + Speed Control + Handpiece
M.SR + C.FCT Foot Control + H.30 Chuck Handpiece K.8301 $372.37 M.SR-2 + C.FCH-2 Foot Control + H.30 Chuck Handpiece K.8301-2 $372.37
M.SR + C.SCT Metal Foot Control + H.30 Chuck Handpiece K.8302 $413.22 M.SR-2 + C.SCH-2 Metal Foot Control + H.30 Chuck Handpiece K.8302-2 $413.22
M.SR + C.FCT Foot Control + H.44T Collet Handpiece K.8303 $367.57 M.SR-2 + C.FCH-2 Foot Control + H.44T Collet Handpiece K.8303-2 $367.57
M.SR + C.FCT Foot Control + H.20 Quick Change Handpiece K.8304 $398.79 M.SR-2 + C.FCH-2 Foot Control + H.20 Quick Change Handpiece K.8304-2 $398.79
M.SR + C.SCT Metal Foot Control + H.44T Collet Handpiece K.8310 $408.41 M.SR-2 + C.SCH-2 Metal Foot Control + H.44T Collet Handpiece K.8310-2 $408.41
M.SR + C.SCT Metal Foot Control + H.8 Collet Handpiece K.8311 $424.03 M.SR-2 + C.SCH-2 Metal Foot Control + H.8 Collet Handpiece K.8311-2 $424.03
M.SR + C.SCT Metal Foot Control + H.20 Quick Change Handpiece K.8313 $439.64 M.SR-2 + C.SCH-2 Metal Foot Control + H.20 Quick Change Handpiece K.8313-2 $439.64
M.SR-2 + C.SCH-2 Metal Foot Control + H.43T Collet Handpiece K.8322-2 $408.42
M.SR + C.SCT Metal Foot Control + H.43T Collet Handpiece K.8322 $408.41
M.SR-2 + C.FCH-2 Foot Control + H.43T Collet Handpiece K.8323-2 $367.57
M.SR + C.FCT Foot Control + H.43T Collet Handpiece K.8323 $367.57
M.SR-2 + C.FCH-2 Foot Control + H.8 Collet Handpiece K.8324-2 $383.19
M.SR + C.FCT Foot Control + H.8 Collet Handpiece K.8324 $383.19
M.SR-2 + C.FCH-2 Foot Control + H.8D Duplex Spring Collet Handpiece K.8325-2 $420.42
M.SR + C.FCT Foot Control + H.8D Duplex Spring Collet Handpiece K.8325 $420.42
M.SR-2 + C.FCH-2 Foot Control + H.28 Collet Handpiece K.8327-2 $367.57
M.SR + C.FCT Foot Control + H.28 Collet Handpiece K.8327 $367.57
M.SRM-2 Bench Motor with built-in Speed Control + Handpiece
M.SRM Bench Motor with built-in Speed Control + Handpiece
M.SRM-2 + H.30 Chuck Handpiece K.8305-2 $419.22
M.SRM + H.30 Chuck Handpiece K.8305 $419.22
M.SRM-2 + H.44T Collet Handpiece K.8307-2 $414.80
M.SRM + H.44T Collet Handpiece K.8307 $414.41
M.SRM-2 + H.28 Collet Handpiece K.8328-2 $416.52
M.SRM + H.28 Collet Handpiece K.8328 $414.90
M.SRB-2 Bench Motor + Speed Control + Handpiece
M.SRB Bench Motor + Speed Control + Handpiece M.SRB-2 + C.FCH-2 Foot Control + H.30 Chuck Handpiece K.8331-2 $408.41
M.SRB + C.FCT Foot Control + H.30 Chuck Handpiece K.8331 $408.41
M.SRB-2 + C.FCH-2 Foot Control + H.44T Collet Handpiece K.8332-2 $403.60
M.SRB + C.FCT Foot Control + H.44T Collet Handpiece K.8332 $403.60
M.SRB + C.SCT Metal Foot Control + H.8D Duplex Spring Collet Handpiece Specify Plug Options for 230 Volt motor + control + handpiece sets or for use
K.8333 $497.30 outside North America. Plug Options for 230 Volt with power plugs for regions
outside North America may be ordered by adding the following to the end of the
part numbers in red. Example: K.8301-21 for United Kingdom
14
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
TX and LX Motor Sets
Motor +Speed Control + Handpiece 115 volt for most usage in North America
TX Motors are ONLY M.TX Sets with 39" Standard KEY TIP Shafting
available in 115 Volt
Motor + Speed Control + Handpiece Set No. Price
and have a speed range of
500 – 15,000 RPM. Detailed M.TX Hang Up Motor + Speed Control + Handpiece
information on TX Motor and
M.TX + C.TXR Foot Control + H.30 Chuck Handpiece K.8401 $456.46
Speed Controls are on
pages 6–8. M.TX + C.SXR Metal Foot Control + H.30 Chuck Handpiece K.8402 $492.49
M.TX + C.SXR Metal Foot Control + H.44T Collet Handpiece K.8405 $487.59
M.TX + C.EMX Dial Speed Control + H.44T Collet Handpiece K.8410 $487.69
M.TX + C.SXR Metal Foot Control + H.43T Collet Handpiece K.8424 $487.69
M.TXH + C.TXR Foot Control + H.30H Square Drive Chuck Handpiece K.8407 $492.49
M.TXH + C.SXR Metal Foot Control + H.30H Square Drive Chuck Handpiece K.8408 $528.53
M.TXH + C.SXR Metal Foot Control + H.44HT Square Drive Collet Handpiece K.8409 $528.53
Foot Control Metal Foot Control Dial Control
M.TXMH Bench Motor with built-in Speed Control + Handpiece
M.TXMH + H.44HT Square Drive Collet Handpiece K.8412 $608.22
Handpiece information on page 9 – 12 M.TXBH Bench Motor + Speed Control + Handpiece
M.TXBH + C.TXR Foot Control + H.44HT Square Drive Collet Handpiece K.8425 $528.53
H.30 H.44T M.TXBH + C.TXR Foot Control + H.30T Square Drive Chuck Handpiece K.8426 $528.53
Chuck Handpiece Collet Handpiece
H.43T H.28
115 volt for most usage in North America
Collet Handpiece Collet Handpiece M.LX Sets with 39" Standard KEY TIP Shafting
Hang Up Motor + Speed Control + Handpiece
H.8 H.20 M.LX + C.TXR Foot Control + H.30 Chuck Handpiece K.8501 $426.43
Collet Handpiece Quick Change Handpiece M.LX + C.EMX Dial Control + H.30 Chuck Handpiece K.8504 $462.46
H.30H
Square Drive
H.44HT
Square Drive 230 volt for most usage internationally – specify power plug option
Chuck Handpiece Collet Handpiece M.LX-2 Sets with 39" Standard KEY TIP Shafting
Hang Up Motor + Speed Control + Handpiece
M.LX-2 + C.TXR-2 Foot Control + H.30 Chuck Handpiece K.8502 $426.43
15
Motor Sets - Non – Conductive Shafting
Motor+ Speed Control Combinations OR Motor + Speed Control + Handpiece
Foredom Developed Non-Conductive Shafting for Stone Carving, EquineDental or Other Uses in Wet Environments Specialized standard length and longer key tip and square
drive inner shafts have plastic, non-conductive bushings that prevent the flow of stray current through the shaft and into the handpiece.
M.TX + C.SXR Metal Foot Control + H.44T Collet Handpiece K.8416 $502.11
$446.84 and C.SCT Cast Iron Speed Control in place of K.2820 Classic Jewelers Kit with C.SCT Cast
C.FCT Plastic Housed Speed Control $472.08 Iron Speed Control in place of C.FCT
Plastic Housed Speed Control
17
TX, LX & PGX Motor Kits – Jewelers Kits and Power Graver
Kits include – a motor, speed control, and handpiece plus an assortment of accessories (burs, bits, etc.).
Hammer Stone Setting Kit
K.2250 Hammer Stone Setting Kit with i M.TX, M.LX & M.PGX have permanent magnet motors
The PowerGraver Kit has 1/20 HP horsepower hang-up motor for slower speeds up to
The PowerGraver 2,800 RPM specially designed for stone setting and engraving. S-76N Neoprene Sheath
Specially designed with components only connects to H.9D handpiece, shown on left - part of a dedicated system ONLY runs
for stone setting such as bead, prong, at speeds up to 2,800 RPM. Available in 115 or 230 Volt.
channel, hammer and bezel settings,
engraving, and other decorative work. K.2293 PowerGraver Kit with Dedicated Components
$780.78 M.PGX Motor equipped with S-76N Neoprene Sheath
C.EMGX Dial Speed Control, C.FCGX On/Off Foot Switch
AK290 Accessory Kit in small round bur holder, page 57.
handpiece oil and flex shaft grease.
Includes: H.9D Handpiece $270.27
(Priced if sold HP10177P Non-Threaded Anvil Point $7.21
separately) HP10215 Non-Threaded Carbide Stylus $45.65
UPGRADES:
K.2291 PowerGraver Kit plus MAMH-1 Bench Clamp Motor Hanger
$852.42
K.2292 PowerGraver Kit plus MAMH-2 Base Mount Motor Hanger
$883.88
H.9D Handpiece K.2293-2 PowerGraver Kit 230V Kit, 11.25 lb, US Plug
$780.78
18
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Additional Kits – Jewelers Kits
Kits include rotary accessories and are the easiest and most affordable way to
get started with Foredom.
Kits include – a motor, speed control, and handpiece plus an assortment of accessories (burs, bits, etc.).
SR MOTOR KITS Kit Descriptions on page 17 TX MOTOR KITS 115 Volt ONLY Kit Descriptions on page 18
Description Kit No. Price
Description Kit No. Price
Classic Jewelers Kit with H.30 Chuck Style Handpiece 11.7lb K.2230 $406.01
High Torque Jewelers Kit with H.30® Chuck Style Handpiece 10.4 lb K.TX300 $499.70
Additional Options:
Additional Options:
Kit + Bench Clamp Motor Hanger, 14.6 lb K.2231 $464.86
Kit with Bench Clamp Motor Hanger, 13.3 lb K.TX301 $570.57
Kit + Base Mount Motor Hanger, 15.0 lb K.2232 $488.88
Kit with Base Mount Motor Hanger, 13.7 lb K.TX302 $594.59
Kit + Cast Iron Foot Pedal instead of C.FCT, 16.45 lb K.2830 $446.84
Kit + Cast Iron Foot Pedal instead of C.TXR, 12.15 lb K.TX380 $535.73
230V Kit, 11.7 lb, US Plug K.2230-2 $406.01
UKCA & CE Compliant 230V Kit, 11.9 lb, UK Plug K.2230-21CE $448.05
CE Compliant 230V Kit, 11.9 lb, Continental European Plug K.2230-22CE $448.05
LX MOTOR KITS Kit Descriptions on page 18
Jewelers Kit with H.20 Quick Change Handpiece 11.0lb K.2220 $431.23 Stone Setting Kit with H.18 Quick Change Handpiece 10.3 lb. K.2240 $541.74
Additional Options: Additional Options:
Kit + Bench Clamp Motor Hanger, 13.9 lb K.2221 $490.09 Kit with Bench Clamp Motor Hanger, 13.2 lb K.2241 $600.60
Kit + Base Mount Motor Hanger, 14.3 lb K.2222 $514.12 Kit with Base Mount Motor Hanger, 13.6 lb K.2242 $624.62
Kit + Cast Iron Foot Pedal instead of C.FCT, 16.20 lb K.2820 $472.08 Kit + Cast Iron Foot Pedal instead of C.TXR, 11.85 lb K.2840 $577.78
230V Kit, 11.0 lb, US Plug K.2220-2 $431.23 230V Kit, 10.3 lb, US Plug K.2240-2 $541.74
UKCA & CE Compliant 230V Kit, 11.2 lb, UK Plug K.2220-21CE $473.28
CE Compliant 230V Kit, 11.2 lb, Continental European Plug K.2220-22CE $473.28 Hammer Setting Kit with H.15 Hammer Handpiece 10.3 lb. K.2250 $516.52
Additional Options:
Kit with Bench Clamp Motor Hanger, 13.2 lb K.2255 $575.38
Deluxe Jewelers Kit with 2 Handpieces – H.30 and H.20 K.2200 $497.30 Kit with Base Mount Motor Hanger, 13.6 lb K.2256 $599.40
Additional Options: Kit + Cast Iron Foot Pedal instead of C.TXR, 11.75 lb K.2850 $552.55
Kit with Bench Clamp Motor Hanger, 14.2 lb K.2201 $556.16 230V Kit, 10.3 lb, US Plug K.2250-2 $516.52
Kit with Base Mount Motor Hanger, 14.6 lb K.2202 $580.18
Kit + Cast Iron Foot Pedal instead of C.FCT, 16.75 lb K.2800 $538.14 Deluxe Stone Setting Kit with 2 Handpieces– H.18 & H.15
10.7 lb, Kit Description on page 18 K.2245 $743.97
230V Kit, 11.3 lb, US Plug K.2200-2 $497.30 Additional Options:
Kit with Bench Clamp Motor Hanger, 13.6 lb K.2246 $815.84
UKCA & CE Compliant 230V Kit, 11.5 lb, UK Plug K.2200-21CE $539.34
Kit with Base Mount Motor Hanger, 14.0 lb K.2247 $847.30
CE Compliant 230V Kit, 11.5 lb, Continental European Plug K.2200-22CE $539.34
Kit + Cast Iron Foot Pedal instead of C.TXR, 12.15 lb K.2845 $783.31
Flex Shaft Kit with H.30 Handpiece & Jump Ringer 15.4 lb. K.8301-307 $494.89
i
Kit K.2230 is packaged in a 19" x 12-1/4" x 4-1/2" display box.
Additional Options: All other kits come in white box.
230V Kit, 15.4 lb, US Plug K.8301-307-2 $494.89 Kits with metal foot controls are packaged in a 17-3/4" x 24-1/4" x 4-1/2" white box.
230V Kit, 15.4 lb, UK Plug UKCA & CE Compliant K.8301-307-21CE $536.93
230V Kit, 15.4 lb, European Plug CE Compliant K.8301-307-22CE $536.93
C.EM Dial Speed Control – bench top control in plastic housing with H.28 Handpiece – slim, precision collet-style handpiece includes two collets:
variable speed dial makes it easy to maintain and return to a desired 3⁄32" (2.35mm) and 1/8" (3.18mm) installed, plus pin and wrench. 5-1/4"
speed. 5" long, 5-7/8" wide, 2-3/4" high Page 5 long, 23/32" diameter - center. Page 9.
C.FCT Foot Speed Control – Foredom’s most popular variable speed AKWK53 Accessory Assortment Kit with Rotating Bur Holder – 31-pc
control. Comes in sturdy plastic housing with wide footprint and non-skid Kit contains woodcarving accessories. That include Typhoon® Carbide Burs,
pads on the bottom for smooth control from low to maximum speed. Aluminum Oxide Mounted Points, Steel Cutter, Plated Diamond Point,
7-1/4" long, 4-1⁄2" wide, 2-1/2" high Page 5. Carving Drill, and Sandpaper Mandrel. $140.87 if purchased separately
AKWK50 Accessory Assortment Kit – This 12-pc Assortment contains
C.SCT Foot Speed Control – Offers the same electronics and smooth woodcarving accessories including. That include Typhoon® Carbide Burs,
control as the C.FCT, and housed in heavier cast iron. (7" long, 5" wide, Aluminum Oxide Mounted Points, Steel Cutter, Plated Diamond Point, Steel
2-1/2" high) Page 5. Carving Drill, and Sandpaper Mandrel.
AK52 Accessory Assortment Kit with Rotating Bur Holder– This13-pc
Motor Hangers suspend hang-up motors above the work bench. The MAMH-1 Assortment contains carving accessories. That include Typhoon® Burs, High
has a clamp mount and the MAMH-2 base mount attaches with screws. Both Speed Steel Engraving Burs, Steel Carving Drill, Brass Cleaning Brush, HPG-30
have a handpiece rest, safety clips, couplings and set screws. Page 30. Handpiece Grip, 3M Particulate Respirator. .
20
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Additional Kits – SR, TX & LX Woodworking Kits
Kits include – a motor, speed control, and handpiece plus an assortment of accessories (burs, bits, etc.).
21
General Use Kits
Kits are an easy and more affordable way to get started with Foredom.
Kits include – a motor, speed control, and handpiece plus an assortment of accessories (burs, bits, etc.).
Industrial Kit with Square Drive 230V Industrial SRH Kit with Square Drive Shafting & Metal Speed Control, H.44HT Square Drive
K.SRH440 Industrial Kit with Square Drive Handpiece, 14.4 lb
$456.46 Shafting, Metal Foot Control & 230V Kit, 14.4 lb, US Plug or specify power plug. K.SRH440-2 $498.50
H.44HT Square Drive Handpiece
M.SRH Motor with / C.SCT Speed Control UKCA & CE Compliant 230V Kit, 14.6 lb, UK Plug K.SRH440-21C $489.50
H.44HT Handpiece / AKHK25 Accessory Assort- C.FCT-2CE Foot Control is substituted for C.SCT
ment Kit & flex shaft grease. CE Compliant 230V Kit, 14.6 lb, Continental European Plug K.SRH440-22CE $498.50
UPGRADES:
K.SRH441 K.SRH440 Industrial Kit plus
$515.32 MAMH-1 Bench Clamp Motor
Hanger
K.SRH442 K.SRH440 Industrial Kit plus
$539.34 MAMH-2 Base Mount Motor
Hanger
AKHK25 10-Pc Kit contains unmounted
and mounted accessories with 1/8" shanks
including a carbide bur, CeramCut Blue
M.TXH Motor Industrial Kit with Square Stones, cut off Wheel, mounted brush, rubber
Drive Shafting bonded abrasive wheels, and three mandrels.
K.TXH440 M.TXH Motor Industrial Kit See page 57
$550.15 with Square Drive Shafting,
Metal Foot Control and
H.44HT Square Drive Handpiece
M.TXH Motor / C.SXR Speed Control
H.44HT Handpiece / AKHK25 Accessory
Assortment Kit & flex shaft grease.
UPGRADES:
K.TXH441 K.TXH440 Industrial Kit plus
$609.00 MAMH-1 Bench Clamp Motor AK21 88-Pc Kit contains broad assortment of accessories with 3/32" & 1/8" shanks
Hanger including steel cutters, CeramCut Blue stones, aluminum oxide and plated diamond
points, mounted brushes, fluted engraving burs, V Stones, mounted & unmounted
K.TXH442 K.TXH440 Industrial Kit plus felt bobs, red rouge, mandrels, grinding stone, rubber bonded wheels, cotton buff,
$633.03 MAMH-2 Base Mount Motor and cut off disc. See page 57
Hanger
22
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Flex Shaft – Maintenance Supplies and Parts
Foredom machines are known to last for decades. Over the life of a machine, you can expect to clean, lubricate, replace shafts, sheaths, and
motor brushes. Bearings wear over time and may require replacement. Tiny screws roll off the table and disappear forever. You can install
new parts and do routine maintenance on your own without having to send the tool back to the factory, or replace it altogether.
UA113-4 $5.20 Set Screw for Motor Connector, 4-pack MP2019P $10.81 For 1/8HP Series SR, S, H & K Motors
MP119P $10.81 For CC, MM, DD Motors 115V ONLY
Lubrication Supplies MP117P $13.21 For R, RB, EE, MMG, GG and 230V CC Motors
MS10006 $4.20 Foredom Flexible Shaft Grease in 1 oz. tube MP229P $11.51 For discontinued Bench Grinders 1 & 5, and discontinued
Series F motors with slots.
MS10005 $5.40 Foredom Motor & Handpiece Oil (10 Wt.) in hypodermic
dispenser, 1/4 oz Motor Brush Caps sold individually
MS10008 $5.40 Foredom Grease in 1/2 oz tube for H.50 & H.50C Chisel Handpieces MP133 $5.20 For 1/6HP Series SR & SRH, Series TX, TXH, LX, LXH, PGX Motors
MP120 $5.20 For 1/8HP Series SR & S, Series CC, L, PG, Motors &
Arch Trimmers and older Series TX and LX motors with only one
Elma 85 General Purpose front label (no back label)
Ultrasonic Cleaning Concentrate MP273 $5.20 For M.BL, BL-1, BL-1A, BL-2 Bench Lathes
General purpose concentrate for all metal surfaces. Removes dirt, grease,
and polishing compounds. Free of alkaline and acid substances, biodegradable &
non-ammoniated. Combine concentrate with tap water. Used in ultrasonic Hang Up Motor Bales & Bale Screws
cleaners and rotary tumblers. UA1059 $5.20 Bale for Current Motors and S and 1/8HP Series SR Motors
DA10985 $46.85 (per quart) 1 Quart Yields 5 Gallons UA106-4 $5.20 per 4-pk Shoulder screws for attaching bales to SR & TX Motors
A-RT04 $21.89 (4 oz) 4 oz. Yields 2.5 Quarts
23
Shaft & Sheath Replacements – Key Tip and Flexade
Handpiece End Outer Sheath Motor End
S-96A $13.21 39-1/4" Key Tip Shaft for discontinued EE, GG, MMG S-77-66 $21.03 63-1/4" Optional Sheath. Use with Shafts S-93-66
motors, 975, 980W, 981W. Use with Sheath S-80 or S-93-NC-66
S-97 $21.25 33-1⁄2" Key Tip Shaft for discontinued F, JJ, JB motors. S-80 $22.41 37-1/8" Sheath for discontinued EE, GG, MMG geared
Use with Sheath S-82 motors, 975, 980W, 981W. Use with Shaft S-96A
S-82 $21.26 31-1/2" Sheath for discontinued F, JJ, JB motors.
Use with Shaft S-97
Key Tip - Factory Pre-Lubed Assemblies
S-93/77 $36.04 S-93 Shaft + S-77 Sheath Pre-Lubed Assembly
S-93/77-43 $38.43 S-93-43 Shaft + S-77-43 Sheath Pre-Lubed Assembly i Maintenance videos on foredom.net show you how to
properly clean, lubricate, adjust, and replace shafts & sheaths.
S-93/77-66 $45.65 S-93-66 Shaft + S-77-66 Sheath Pre-Lubed Assembly
Other Parts
UA112-4
$5.20 Set Screw 4-pk for all key tip shafts and
for all non-conductive shafts.
$5.20
SS87 Plastic Cup for Non-Conductive Motor
Coupling – Key Tip or Square Drive
24
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Shaft & Sheath Replacements – Square Drive, and Slip Joint
Square Drive Inner Shafts and Outer Sheaths for SRH, TXH, LXH Optional Lengths for SRH, TXH, LXH
S-10805 $22.83 45-3/4" Optional Square Drive Shaft. Use with S-10802TX
S-10823 $22.83 63-3/4" Square Drive Shaft - Supplied on motors SRH,
TXH and LXH. Use with S-10801TX. S-10802TX $65.03 45" Optional Square Drive Sheath Assembly. Includes
S-10801TX $73.79 63" Square Drive Sheath Assembly – Supplied on SS10822. Use with S-10805
motors SRH, TXH & LXH. Includes SS10819 Silencer Spring. SS10822 $18.02 41-1/2" Optional Silencer Spring
Use with S-10823.
S-10805-NC $25.22 45-3/4" Optional Non-Conductive Square Drive Shaft
SS10819 $20.65 59-1/2" Silencer Spring for motors listed above
S-10802-NC $67.17 45" Optional Non-Conductive Square Drive Sheath with
S-10801-NC $75.93 63-3/8" Optional Non-Conductive Square Drive Sheath SS10822
Includes SS10819 Silencer. Use with S-10827-NC.
S-10827-NC $28.83 63-3/4" Optional Non-Conductive Square Drive Shaft
Use with S-10801-NC. For Discontinued Series H Motors
S-10805 $22.83 45-3/4" Square Drive Shaft
Factory Pre-Lubed Assemblies S-10802A $84.68 44-3/8" Square Drive Sheath Assembly. Includes SS10822
S-10816TX $114.33 63-3/4" Square Drive Pre-Lubed Assembly: S-10823, SS10822 $18.02 41-1/2" Silencer Spring
S-10801TX with SS10819
S-10804B $106.65 45-3/4" Factory Pre-Lubed Assembly S-10805,
S-10816-NC $105.39 63-3/4" Non-Conductive, Pre-Lubed Assembly: S-10802A with SS10822
S-10827-NC, S-10801-NC, SS10819
S-10804TX $104.28 45-3/4" Optional Pre-Lubed Assembly: S-10805, S-10805/45 $43.89 Shaft for Older Series H Motors that had square drive
S-10802TX with SS10822 tips on BOTH ends and no coupling. Converts connection to
a current version with coupling. Use with S-10802A Sheath.
S-10804-NC $102.70 45" Optional Non-Conductive, Pre-Lubed Assembly:
S-10805-NC, S-10802-NC with SS10822 Set Screw Replacements
UA114-4
$5.20 Set Screw 4-pk for all standard
square drive shafts.
UA112-4
$5.20 Set Screw 4-pk for Non-Conductive
square drive shafts.
25
Flex Shaft Replacement Parts – Assorted
Speed Control Parts
Trigger Switches for Foot Operated Speed Controls
If your foot control starts running at full speed ONLY and loses variable speed functioning, try
Chuck Keys & Wrenches for replacing the trigger switch, which you can install yourself.
Handpieces and Attachments
HP72 $5.20 #0 Chuck Key for H.30®, H.30-C1, H.30-C2, H.30H, H.30SJ,
$13.21 each
H.25C, A-JCA-1, A-JCA-2 Chuck Arbors and H.MH-120 CP10857 For C.FCT-1/C.SCT-1, C.FCH-1/ C.SCH-1 (115V)
HPCK-0 $7.21 #0 Chuck Key with plastic handle for H.30®, H.30-C1, H.30-C2, CP11251-REP For C.TXR-1/C.SXR-1 (115V)
H.30H, H.30SJ, H.25C, A-JCA-1, A-JCA-2 Chuck Arbors and H.MH-120 CP11027 For C.FCT-2/C.SCT-2, C.FCH-2/ C.SCH-2 (230V).
HP10586 $5.20 11/32" Wrench Assembly for Handpieces H.8, H.8D. Also Right Also For C.TXR-2/C.SXR-2 (230V)
Angle Attachment A-69224
HP10588 $5.20 11/32" Pin & Chuck Wrench for Handpieces H.28, H.28H, H.28SJ
HP103117 $5.20 1/2" Pin & Chuck Wrench for H.35, H.35SJ, H.25, H.25H, H.43T,
Circuit Boards for Foot & Dial Operated Speed Controls
H.44T, H.44T-E, H.44HT, H.44TSJ If your foot control starts running at full speed ONLY and loses variable speed functioning, try
replacing the circuit board.
HP5238 $5.20 3/8" Wrench for H.52, H.52D, H.52SJ
CP10874 $34.65 For C.SXR-1 (115V) and C.SXR-2 (230V)
HP50012 $5.20 12mm Wrench for H.50 & H.50C Chisel Handpieces
CP10521 $23.42 For C.TXR (115V and 230V)
CP10495 $56.45 For C.EM-1 & C.EMX-1 (115V)
CP10495-2 $56.45 For C.EM-2 & C.EMX-2 (230V)
Handpiece Ball Bearings, Sheath Spring Clip, Catch Balls, CP10495-F $62.70 For Dual Range C.EMF-1 (115V)
Chuck Nuts, Duplex Springs CP10495-2F $58.28 For Dual Range C.EMF-2 (230V)
CP10495-XF $62.70 For Dual Range C.EMXF-1 (115V)
Ball Bearings
HP58
$9.61 Ball Bearing for H.8, H.8D, H.8SJ, H.28, H.28H, H.28SJ
$9.61 Ball Bearing for H.30®, H.30-C1, H.30-C2, H.30H, H.43T,
HP61
Fuses for Dial Operated Speed Controls
H.44T, H.44HT, H.44TSJ, H.44A, H.44B If your dial control stops running, the fuse may be blown. Fuse compartment and
supplied spare fuse are located below detachable power cord receptacle.
Spring Clip $5.20 each
HP43
$5.20 Spring Clip for ALL Handpieces EXCEPT Slip Joint CP10513 3 Amp fuse for C.EM-1, C.EMF-1, C.EMHF-2, C.EMX-2
CP10515 5 Amp fuse for C.EMX-1, C.EMXF-1, C.EMH-1
CP10511 1.5 Amp fuse for C.EM-2, C.EMG-1, C.EMG-2, C.EMGX-1 and C.EMGX-2
Catch Ball Older Dial Speed Controls
HP48-4
$5.20 Catch Ball, 4-pk for ALL Handpieces EXCEPT Slip Joint CP10543 1.5 Amp fuse for C.EM-1 with attached power cords
CP10586 5 Amp fuse for C.EMX-1 with attached power cords
CP10574 3 Amp fuse for older 115V M.BL Lathes, with attached power cords
Chuck Nuts
HP3426
$9.61 Chuck Nut for H.43T, H.44T, H.44HT, H.44TSJ, A-CHA-4 & A-CHA-5
HP2826
$12.31 Chuck Nut for H.28, H.28H, H.28SJ Handpieces,
A-69224 Right Angle Attachment Replacement Power Cords
HP103105
$11.96 Chuck Nut for H.25, H.25H, H.35, H.35SJ
HP44A
$5.20 Chuck Nut for H.8, H.8D, H.8SJ
Plug Detachable C7 Detachable Stripped & Tinned
End Part No. Price Part No. Price Part No. Price
Duplex Spring Parts US CP10831 $12.01 CP10595 $6.61 CP10541 $ 7.21
HP76
$15.02 Duplex Spring UK CP10834 $25.22 CP10834-C7 $24.72 CP10553
$19.22
HP76B $180.18 Duplex Spring, 12-pack Euro CP10835 $19.22 CP10835-C7 $19.06 CP10554
$14.41
HP10531
$1.10 Retaining Ring for Duplex Springs and Duplex Spring Adapters Australia CP10836 $19.22 CP10836-C7 $19.40 CP10556
$14.41
Israel CP10838 $19.22 CP10838-C7 $20.22 —
Brazil CP10843 $8.26 CP10842-C7 $19.06 CP10841 $8.26
India CP10839 $19.22 — CP10555 $19.22
Handpiece Grip
HPG-30 $5.20 1/8" thick rubber cushion adds layer of comfort to Handpieces
H.30®, H.30-C2, H.30H and H.30SJ. Grip slides on and holds
firmly. (Handpiece not included)
US / North UK / Euro / Australia Israel Brazil India
America United Continental
Kingdom Europe
26
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Handpiece Collets, Parts & Miscellaneous
Collets For Handpieces – H.8, H.8D, H.8SJ, H.28, H.28SJ, H.28H, H.9D,
Right Angle Attachment A-69224
HP600 $48.20 Set of 4 Collets– 1 of each below.
Individual collets $10.21 each
HP602 1/16" (1.6 mm) HP604 1/8" (3.18 mm)
HP603 3/32" (2.35 mm) HP605 3 mm
Collet Adapters for Collet Style Flex Shaft and Micromotor Handpieces
$19.58 ea
HPL4-3233 3/32" to 1/16" HPL4-3236 1/8" to 3/32"
HPL4-3234 1/8" to 1/16" HPL4-3237 3.0 mm to 1.6 mm
HPL4-3235 3.0 mm to 3/32
5" Screwdriver
Double ended screwdriver with 1/8" wide flat blade and Phillips tip. Fits many small screws
used on various Foredom products.
A-PS83 $5.90
27
Work Bench System
Foredom’s Work Bench System is a quality designed and manufactured
modular system.
The Work Bench System will help you organize your tools and accessories and
light your workspace. Components are made of brushed stainless steel and
anodized aluminum with uniform mounting brackets. Components sold separately
so you can customize your space. The MAMH-13 double
motor hanger with screw-
in base mount and spring
Dual Motor Hanger safety clips is the central
MAMH-13 $70.87 component of the system.
25-3/4" long x .875" diameter upright rod and height
adjustable angled extension rod with two spring hooks
can hold up to two motors. Attach it to any bench top
with Base Mounting Plate MABC-3 and supplied wood
screws. Height adjusts from 30" – 49". 4.3 lb pkg wt
Basic Components Sold Separately
25-3/4" Support Rod MAAM-L $50.45 Motors,
25-3/4" long x .875" diameter upright rod to hold handpieces
components of the Work Bench System. Includes and rotary
MABC-3 Mounting Plate and wood screws. Ideal for accessories
users who already have a motor hanger. NOT included
17-3/4" Support Rod MAAM-S $46.85
17-3/4" long x .875" diameter upright rod to hold
components of the Work Bench System. Includes LED Light Bar
MABC-3 Mounting Plate and wood screws. Ideal for MALB-1 $182.88
users who already have a motor hanger. Light up your work surface
with this 31-1/2" long light!
Base Mount for MAMH-13 MABC-3 $20.42 When it is horizontal it is
Screws to top of bench for permanent mounting. ‘ON’ – pivoted 90º upright,
Holds Work Bench support rods or other rods it turns ‘OFF’. Adjustable
height mounting bracket fits
the MAMH-13 Motor Hanger,
other separate vertical
support rods (below). Cord
set connects to an adapter/
transformer which plugs into
an electrical outlet.
Specifications:
31-1/2" (80cm) long, 700
MAMH-
Lumens, 18 Watt, 24 Volt DC,
MAAM-L MAAM-S 115 or 230 Volt 50/60 Hz, 8.5
lb pkg wt
Universal Voltage from 100V to 240V power can be used anywhere in the world.
Replacement Parts: MALB-1 includes a power plug for North American outlets. You can use your own
Description Part No. Price adapter in other countries or order the MALB-1 with power plug adapters packed in
Adapter Plug for light UAL018 $46.85 the box.
UK 3-prong plug adapter HPL4-506 $6.61 United Kingdom (3 prongs, UKCA) MALB-1-21 $199.45
Australia 2-prong plug adapter HPL4-507 $5.20
Europe (2 prongs, CE) MALB-1-22 $194.99
Europe 2-prong plug adapter HPL4-508 $5.20
Light Shade UAL013 $8.40 Australia (2 prongs) MALB-1-26 $194.24
LED Light Strip UAL007 $70.87
Spring Hook for Motor Hanger UAL015 $5.76
28
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Work Bench System––Component
Component Arms
Arms, Replacement Parts
Customize your space!
• Uniform mounting brackets attach customizable component arms to the MAMH-13 or
MAAH-B
an alternate .875" diameter support rod in the order that works best for you.
Bur Holder
• Arms average about 12" long and swing 180º horizontally, keeping small tools and Arm
accessories in reach when you need them and out of the way when you don't.
MABC-3
29
Flex Shaft Motor Hangers
Motor Hangers safely suspend hang-up motors above the work bench for ready access.
• Height adjusts to a maximum of 38" from bench top to cross bar, or 36-1/2" from bench to top of motor bale.
• 3-pc hexagonal solid steel support rods with couplings and top safety hook rods can hold up to two motors.
• Designed for easy assembly, they fit in a Foredom kit box or ship separately
MAMH-1 disassembled
30
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Drill Presses and Handpiece Holders
Foredom drill presses hold a handpiece vertically for drilling straight, accurate,
repeatable holes to specified depths.
They are ideal for modeling, spot-facing, countersinking and reaming in wood, wax, plastic, metal, glass and gemstone. High-speed steel, cobalt and diamond drills are most com-
monly used for drilling. Whatever accessory you use, let the speed of the tool do the work. Too much feed pressure can damage or break your drill or cause loss of control. Twist drills
are often used for drilling holes in metals, woods, and plastics. On work items with rounded surfaces such as rods or beads, it is a good idea to center punch a starting hole to keep
the tip of the drill from "walking" or wandering from the desired starting point. When drilling, raise and lower the drill frequently to clear away dust and debris.
Foredom P-DP30 converts your flexible Foredom P-DP70 Drill Press designed
shaft power tool into a precision drill press. for use with ONLY a H.MH-170 or
The sturdy, all metal stand is fully adjustable– H.MH-17018 Brush Type Rotary Micromotor
arm, table, etc. 2" throat capacity, up to 1-1/4" Handpiece (page 34) – Foredom’s most
stroke length. 4" wide x 5" deep x 15" tall widely used micromotor. It will NOT fit our
(to top of post), 10-1/2" of vertical travel (or other micromotor handpieces.
ultimate height of object you can work on) with It is the only drill press that works with a
table swung out of the way. .5 lb pkg wt micromotor handpiece. Burs, bits, drills and
other accessories can be switched out while
P-DP30 $203.01 the handpiece is mounted.
Micromotor 2" throat capacity, up to 1-1/4" stroke length.
Replacement 7/64" Allen Wrench for tightening not included 4" wide x 5" deep x 15" tall (to top of post),
H.30 in P-DP30 handpiece mounting. Not 10-1/2" of vertical travel (or ultimate height of
shown. DP10619 $5.20 object you can work on) with table swung out
of the way. 9.5 lb pkg wt.
P-DP70 $206.51
*Designed for use with H.30®, H.30H, H.44,
i H.44T, and H.44HT Handpieces (not H.43T)
(page 9 – 13) with flex shafts.
Handpiece
not included i *Designed for use with H.MH-170
Micromotor Handpiece.
Handpiece Holders Mini Vises Zinc Die Cast Mini Vise firmly grasps small
work pieces for precision drilling on the table
Keep the handpiece steady while you bring the work piece to the tool. Handpiece can top. Horizontal and vertical 'v' grooves hold
be raised between 2-1/4" to 9-1/2" from the work surface (measured from center of small round pieces. Slots in base are for
handpiece). Includes handpiece mount, rod and MABC-1 clamp. mounting to drill press table slots. (Mounting
hardware included.)
4-1/4" long x 2-3/8" wide x 1-1/2" high.
Jaw Width: 1-1/4". Jaw Capacity: 1-1/2".
Jaw Height: 1/2". Mounting Slots 11/64"
wide x 1-7/8" long. Accepts #8 screws.
Long
Hub
Drive
Cup
i
A-3608 - Aluminum Oxide Sandpaper Disc, 400 grit A-69212L - Long Hub, 8mm high, 1-year limited warranty
A-3522 - Abrasive Pad, 80 grit 14mm long mounting screw
The Angle Grinder has a 1 to .75 gear reduction which
reduces motor speed by 25%.
NEVER use it in REVERSE rotation.
Additional Angle Grinder Accessories It is best to secure the work piece in a vise or clamp to allow
and Part - Available Separately for two handed operation of the angle grinder.
Page 87-90
5,000–15,000 RPM Optimum Operating Speed
18,000 RPM Max Speed for Short Intervals
A-69224 $57.66
Requires a Foredom H.30, H.30H, or H.30SJ Handpiece (pages 9 – 13), 2" Angle
Grinder Attachment, and Flexible Shaft Machine.
Attachment fits into spaces 4" or more in depth when mounted on an Angle Grinder
Attachment and an H.30 Handpiece.
Includes: collet holder, threaded connector, 2 collets for 3/32" and 1/8" shank Angle Grinder
accessories and 2 wrenches. 1/16" and 3mm collets are available separately and in
Collet Set HP600, page 27.
i Attachment,
Handpiece and bur
sold separately
32
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
H.30® Attachments – Belt Sander & Wolf Wax Trimmer
Belt Sander Attachment can sand & smooth narrow spaces Wolf Wax Trimmers are designed for jewelers to trim carving wax
and edges of metal, wood, acrylic and composite materials. and for doing inlay and channel setting accurately and quickly.
The aluminum head is quality-machined, sturdy and compact with 3 permanently Foredom and tool designer, jeweler and educator Kate Wolf have partnered to offer these
lubricated ball bearings. 500 – 4,000 RPM Optimum Speed. 5,000 RPM Maximum Speed tools! Kate Wolf has been carving wax and making award winning jewelry for 37
One-Year Limited Warranty years, teaching workshops throughout the United States for 25 years and continues
Length: 4-7/8" to develop tools for jewelers.
Width: 1-3/4" (at widest) Height: 2"
Wolf Trimmer A-WT1727
A-WT1727 $55.25
• Fits onto a Foredom H.30® handpiece, can
be hand held (against a table or benchpin)
Requires a Foredom H.30,
i
or placed in a GRS BenchMate bracket.
H.30H, or H.30SJ Handpiece
and Flexible Shaft Machine. • 3" diameter table for trimming wax or
plastic at a 90° angle. Use with a cylinder
bur (11mm diameter max.) or other burs.
• Add separating disc(s) to cut grooves in
metal for inlay or channel setting
All Grits:
3 each $16.34 / 18-Pk $12.62/ 18-Pk
100, 180, AK797539 AK797439*
240, 320,
600 and
1000 * 7mm Belts came installed on Older
Model Belt Sander Attachments with
Serial #'s from H11XXXXX
to H09XXXXX
33
Micromotor Comparison Chart
Voltage 115V/230V Selector Switch 115V/230V Selector Switch Universal Available 115V OR 230V 115V/230V Selector Switch 115V/230V Selector Switch 115V/230V Selector Switch
8 Ncm 6.53 Ncm 2.9 Ncm 7.8 Ncm 2.94 Ncm 2.94 Ncm
Torque 11.33 oz.-in 9.24 oz.-in 4.10 oz.-in 11.0 oz.-in 4.16 oz.-in 4.16 oz.-in
Handpiece Weight 8.9 oz. 18 oz. 6.46 oz. 8.4 oz. 7.3 oz. 13 oz. 13 oz.
Chuck
Collet Size 3/32” & 1/8”
0-5/32”
3/32”, 1/8” or 3mm 3/32”, 1/8” or 3mm 3/32”, 1/8” or 3mm Threded 3/32”, 1/8” or 3mm
H.MH-150, H.MH-15018
Compatible H.MH-120, H.MH-170, H.MH-120, H.MH-170, H.MH-120, H.MH-170,
H.MH-140, H,MH-14018 H.MH-120 only H.MH-130, H.MH-13018 H.MH-120, H.MH-170,
Handpiece* H.MH-17018, H.MH-110 H.MH-17018, H.MH-110 H.MH-17018, H.MH-110
H.MH-17018, H.MH-110
*Most Micromotor Kits include a compatible handpiece. Additional handpieces available for purchase separately.
Micromotor – Portable
K.1030 Portable Micromotor runs at speeds up to 30,000 RPMs.
Take this one with you! Perfect for working at multiple stations, craft or outdoor events, demonstrations or when power may not be available The K.1030 Micromotor with pocket-size
control unit has built-in lithium-ion rechargeable battery for portability. Control unit has a digital RPM display at the top and a dial on the front adjusts speed from 0–30,000 RPM.
Run time is approximately 6-7 hours, depending on whether the micromotor is in continuous use in battery mode. Plug it in for all day use. Battery charge time is 4 hours.
UKCA & CE Marked.
Dial
Speed
Control
Handpiece
Cradle
K.1040 $874.50
3/32" (2.35mm) collet plus additional 1/8" collet included
Kit includes:
Control Unit Handpiece Cradle
Handpiece Handpiece Holder
Variable Speed Foot Control Extra Fuse
• Brushless motor design – eliminating the need to replace carbon brushes
• Two speed settings:
Setting 1 - Full speed range 500 - 50,000 RPM.
Setting 2 - 500 RPM - 5,000 RPM.
• Maximum Torque – (11.3 oz-in / 8 N-Cm) or 160 Watts Output Power Specify Plug Options for 230 Volt
• Sealed housing eliminates dust, noise, and vibration Power plugs for regions outside North America may be ordered by adding the
following numbers in red to the end of the part numbers. For example: K.1040-21 for
• 115 or 230 Volt United Kingdom, UKCA & CE Compliant
• Two Year Warranty
• UKCA and CE Marked, double insulated
Low Speed – offers control and power for stone setting, milling anytime you need slow
steady and smooth!
-2 -21 -22 -26 -32 -34
The motor is in the handpiece. You never need to change brushes on this handpiece. North America United Continental Australia Israel 230V Brazil
Specs: 8.6 lbs. kit shipping weight, Shipping dimensions: 12˝ x 10-1/4˝ x 5-1/4˝ CSA compliant Kingdom Europe -33
UKCA CE compliant 115V Brazil
CE compliant
Components also available for purchase separately.
High Speed Brushless Rotary Handpiece
3/32" (2.35mm) collet + additional 1/8" collet included
6-1/2" long, 1/2" diameter at nosecone, 1-1/8" diameter at widest, 5´ long handpiece cord Parts for K.1040 Micromotor only
• Brushless motor design – eliminating the need to replace carbon brushes
Part No. Price Replacement Part / Supply
• Maximum Torque – (11.3 oz-in / 8 N-Cm) or 160 Watts Output Power
• Sealed housing eliminates dust, noise, and vibration HP6-994
$9.97 Nosecone Wrench
• Ergonomic, comfortable grip
• Easy bur changes – twist to release or lock bur HP6-993
$9.97 Collet Wrench
• Designed for simple collet changes to use 3/32" (2.35mm) or 1/8" shank burs
HP6-933 $6.61 Handpiece Cradle
• Permanently lubricated, shielded, long-lasting ball bearings
• Collet changing wrenches included HP6-610 $13.45 Handpiece Holder for side of control unit
H.MH-140 $576.35 if purchased separately HP6-101 $5.20 Fuse GDB 5 Amp, 250V, 5mm x 20mm
Control Unit HP6-117B $37.84 Collet for 1/8" diameter accessories
6" wide x 8" deep x 4-1/4" high, 6´ cord, 50/60 Hz, 250 Input Watts, 5.4 lb pkg wt
• Dial sets precise speed & selects a maximum speed for operation with foot control HP6-117 $37.84 Collet for 3/32" (2.35 mm) diameter accessories
• LED digital speed display HP6-117C $37.84 Optional Collet for 3 mm diameter accessories
• Select: Forward or Reverse rotation, dial or Foot speed control
• Voltage selector switch – 110/120V or 220/240 Volt. Specify power cord plug for 230 Volt.
• Built in overload protection
• Convenient handpiece holder with four (4) optional locations on control box
i Collet adapters available page 27
i
-2 -21 -22 -33 Runs at speeds up to
-26 -32 38,000 RPM.
North America United Continental Australia Israel 115V Brazil
CSA compliant Kingdom Europe 2-year limited warranty on
UKCA CE compliant micromotor kits
CE compliant
Components also available for purchase separately. Drill Press and Handpiece Holder available for K.1070
High Speed Rotary Handpiece: H.MH-170 2.35mm (3/32") collet installed Foredom P-DP70 Drill Press de-
$276.28 if purchased separately or H.MH-17018 1/8" collet installed signed for use with ONLY a H.MH-170 or
6.2" Long, 5/8" Diameter at grip, 1" at motor, 7.3 oz/208g. DC30V/1.2A, H.MH-17018 Brush Type Rotary Micromotor
4.2 oz-in or 29.4mNm Torque or 100W Max Watt Output Handpiece (page 34) – Foredom’s most
• Contoured grip rotary type handpiece has quick release collet for easy bur changes.
widely used micromotor. It will NOT fit our
other micromotor handpieces.
• Fan cooled, brush type continuous duty motor runs cool and vibration-free.
It is the only drill press that works with a
• Permanently lubricated, shielded ball bearings require no lubrication. micromotor handpiece. Burs, bits, drills and
• Spare motor brush pair and collet changing wrenches included. other accessories can be switched out while
• Coiled cord connects the handpiece to the Control Unit the handpiece is mounted.
• Works with HP4-917 ONLY. 2" throat capacity, up to 1-1/4" stroke length.
4" wide x 5" deep x 15" tall (to top of post),
10-1/2" of vertical travel (or ultimate height of
Control Unit HP4-917 $252.25 if purchased separately object you can work on) with table swung out
4-3/8" Wide, 5-3/4" Deep, 3-3/4" High Output: DC30V/5.0A of the way. P-DP30. 9.5 lb pkg wt.
Control Unit Features
P-DP70 $206.51
• Forward/Reverse rotation
• Manual/Foot Speed Control.
• An Overload Protection light and an alarm sound alerts you if the motor ever stalls. Handpiece holder for K.1070
• Voltage selector switch – 110/120V or 220/240 Volt Designed for use with H.MH-170
• Variable Speed Foot Control or Optional On/Off Foot Switch Micromotor Handpiece. Keep the
handpiece steady while you bring the
work piece to the tool. Handpiece can be
Variable Speed Foot Control HP4-960 $75.68 if purchased separately raised between 2-1/4" to 9-1/2" from
• Included with K.1070 and other Kits on these pages the work surface (measured from center
of handpiece). Includes handpiece
mount, rod and MABC-1 clamp.
Additional Items MAHH-70 $67.07
Handpiece Cradle HP4-933 $7.81
Spare Motor Brush Pair HP4-163 $20.42
Spare Fuse HP4-110 $5.20
Collet Changing Wrenches HP4-993 $7.21
37
Micromotor - Brush Type Kit – K.1080 - Hammer Handpiece
K.1080 Hammer Micromotor - Brush Type
For stone setting, channel setting, and engraving.
Hammer Handpiece has an adjustable impact force for excellent control.
K.1080 $807.35 6.0 lb pkg wt. UKCA & CE Marked
Kit includes:
Hammer Handpiece Adapter for Threaded Anvil
Control Unit Point (installed) HPH8-32
Foot Control Anvil Points (3)
Spare Motor Brush Pair Allen key
Spare Fuse Graver Holder
Wrenches
38
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Micromotor – Brush Type Kit - K.1020 - High Torque Chuck-style
Plenty of power/torque to accomplish most jobs that a flex shaft can do.
39
Micromotor - Brush Type Kit – K.1090 - Dual Handpiece
K.1090 Dual Handpiece Micromotor Kit:
a rotary handpiece for high speed work on precious metals + a hammer
handpiece for stone setting and texturing. Connect one handpiece at a
time using the outlet on the front of the Control Unit.
Kit includes:
Control Unit
Hammer Handpiece
High Speed Rotary Handpiece
Handpiece Cradle (2)
Adapter for Threaded Anvil Point (installed)
Anvil Points (3) with Threaded Shanks
Graver Holder
Spare Motor Brushes one pair each for H.MH-170
and one for H.MH-110
Spare Fuse
Collet Changing Wrenches Micromotor Comparison Chart
Foot Control Page 34
40
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Micromotor – Dual Port - K.1050
K.1050 High Torque/High Speed Dual Port Kits
50,000 RPM maximum speed, high torque micromotor. Digital RPM Display
Dial Speed Control
1st Port in back for
H.MH-150 Handpiece
Only
K.1050 $1079.88 K.105018 $1079.88
9.6 lb pkg wt with 9.6 lb pkg wt
2.35mm (3/32") collet installed with 1/8" collet installed
Kit includes:
Handpiece Cradle This unit has 2 handpiece ports.
Spare Fuse
Collet Changing Wrench i Port 1 in the back is for the included
H.MH-150 brushless handpiece.
Port 2 in the front is for optional brush
2nd Port for Optional
Brush Type Handpiece
Handpiece (H.MH-150)
Control Unit type handpiece.*
Foot Control Not for use with H.MH-140
Components also available for purchase separately. K.1050 Dual Handpiece Kits
Each kit listed below has both H.MH-150 or H.MH-15018 Brushless handpiece plus a
High Speed Rotary Handpiece: H.MH-150 2.35mm (3/32") collet installed Brush-style handpiece that comes with accessories: tools, spare motor brushes, adapters
$660.66 if purchased separately or H.MH-15018 1/8" collet installed and points that go with that handpiece. See previous pages for brush-type handpiece
6.3" Long, .75" Diameter at grip, 1.06" at motor, 8.4 oz/237.7g.
DC32V/3.4A, 10 oz-in or 70mNm or 100W Max Torque or Watt Output Kits with all components PLUS
• Sealed housing eliminates dust, noise and vibration. Brush Type Hammer Handpiece
• Permanently lubricated, shielded ball bearings require no lubrication. $1674.75
• Comes with spare fuse in fuse holder and collet changing wrench inside handpiece box. Collets K.1053 Brushless K.1050 with
can be installed and changed. 2.35mm (3/32") collet + Brush Type
High Torque Performance at All Speeds: H.MH-110 Hammer Handpiece with
High Speed for smooth, clean, and sharp detailing in metal and wood. Also great for bright
Accessories
cutting, grinding, finishing, texturing, and polishing. K.105318 Brushless K.105018 with
Medium Speed for effortless and fast stock removal in wood, diestone, or acrylic. 1/8" collet + Brush Type H.MH-
Low Speed for extra control and power for stone setting and milling.
110 Hammer Handpiece with
Control unit digital RPM display shows the speed as you work. The dial on the front
Accessories
adjusts speed from 0–50,000 RPM.
Kits with all components PLUS
Brush Type Chuck Style Rotary
Control Unit $420.42 if purchased separately Handpiece
115 Volt: HP4-817 $1,435.43
230 Volt: HP4-817-2 Specify power plug K.1055 Brushless K.1050 with
5.4" Wide, 9.1" Deep, 7" High, 50/60 Hz, 100VA 2.35mm (3/32") collet + Brush
• Dial sets precise speed • Speed x1000 RPMs is shown on digital display Type H.MH-120 Rotary Chuck Style
Handpiece
• Auto cruise setting for foot control • Forward / reverse rotation • Dial / foot speed control
• 2nd port in front of unit for connecting a brush type handpiece K.105518 Brushless K.105018 with
1/8" collet + Brush Type H.MH-120
• Built-in overload protection
Rotary Chuck Style Handpiece
• Ports in back of unit for connecting brushless handpiece and variable speed foot control.
Kits with all components PLUS
Variable Speed Foot Control HP7-7060 $72.07 if purchased separately Brush Type Rotary Handpiece
$1315.31
Kits K.1050 and K.1051018 Include: Priced if purchased separately K.1054 Brushless K.1050 with
Handpiece Cradle HP4-933 $7.81 2.35mm (3/32") collet + Brush Type
Spare Fuse HP4-110 $5.20 H.MH-170 Rotary Handpiece both with
Collet Changing Wrenches HP4-993 $7.21 2.35mm (3/32") collets
K.105418 Brushless K.1050 with
Specify Plug Options for 230 Volt 2.35mm (3/32") collet +
Power plugs for regions outside North America may be ordered by adding the following Brush Type H.MH-170 Rotary
numbers in red to the end of the part number. For example: K.1050-21 for United Handpiece with 1/8" collet
Kingdom, UKCA & CE compliant K.105419 Brushless K.105018 with
1/8" collet +Brush Type H.MH-170
Rotary Handpiece with 2.35mm (3/32")
collet
-34 K.105420 Brushless K.105018 with 1/8" collet +
-2 -21 -22 -26 -32 Brush Type H.MH-170 Rotary Handpiece with 1/8" collet
North America United Continental Australia Israel 230V Brazil
CSA compliant Kingdom Europe -33
UKCA & CE CE compliant 115V Brazil
compliant
41
Micromotor Components and Replacement Parts
Handpiece Cradle - all kits HP4-933 $7.81 Collets for handpieces: H.MH-140, H.MH-130, H.MH-13018, H.MH-170,
H.MH-17018, H.MH-150, H.MH-15018 with Serial # 811XXXX and above
Fuses (after 11/2008) Discontinued: H.MH-145A, H.MH-135:
Brush & brushless kits Type GDC-3.15
Not for K.1060 or K.1040 Brushless Micromotor HP4-110 $5.20 HP4-117 2.35mm (3/32")
Fuse GDB 5 Amp, 250V, 5mm x 20mm for HP4-117B 1/8" (3.18 mm) $37.84 each
K.1060 and K.1040 Brushless Micromotors ONLY HP6-101 $5.20
HP4-117C 3.0 mm
K.1040 Brushless 2.35mm (3/32") collet installed plus 1/8" collet included Older H.MH-130 and H.MH-13018 HP8-163 $20.42
H.MH-140 $576.35
H.MH-170, H.MH-17018, H.MH-110, Current H.MH-130 and H.MH-13018
HP4-163 $20.42
K.1050 type 115V Brushless HP4-817 $420.42 Collet Changing Wrenches for these handpieces:
K.1050 type 230V Brushless HP4-817-2 $420.42 H.MH-170 & H.MH-17018, H.MH-150 & H.MH-15018, HP4-993 $7.21
and discontinued H.MH-145A:
K.1040 type 2115V–230V Brushless HP4-417 $172.02 Discontinued H.MH-135, H.MH-145, and H.MH-145A:
HPJ15-001 $9.55 HPJ15-002 $5.20
42
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Wax Carver and Rotary Tumbler
Foredom's compact, precise Wax Carver Kit Foredom’s new direct drive rotary tumbler
is for jewelers and anyone who makes wax is excellent for burnishing gold, silver, and
models or carves wax. other metals.
Wax Carver
Precision heat control dial sets and maintains temperatures from 95ºF (35ºC) to 560ºF Rotary Tumbler RT101 $485.10
(294ºC). Keep it low for delicate work, turn it up for fast wax removal or vary the heat This efficient, compact rotary tumbler with programmable controls makes repeatable process-
with varying grades of wax. A flashing light shows heat intensity and indicates if the tool is es easy to select. Set the timer, choose the direction of rotation, and select from 20 levels of
unintentionally left on. It can also be wall mounted. All cords are removable for easy storage. speed control ranging from 5 to 100 % of maximum. Work cycle duration is 180 minutes long.
One Year Limited Warranty Direct drive means that there are never any belts to replace.
Lightweight Handpiece with cork insulation keeps fingertips cool while working. Not Included: Steel or stainless steel shot tumbling media is required to operate
Extremely flexible, detachable handpiece cord is perfect for fine details in wax. the tumbler. A non-foaming detergent solution is also recommended.
K.WC-1 $276.28 K.WC-3 $326.72 Dimensions: 9-3/4" high x 7" wide x 10-1/4" deep
Wax Carver Kit with tips A-WT-2, Wax Carver Kit with all 7 tips. Weight: 12 lbs. when empty. Shipping Wt: 14 lbs.
A-WT-3 and A-WT-4. .2 lb pkg wt 1.3 lb pkg wt Barrel: 3.5" inner diameter at widest, 6" between rollers, 3-1/4" diameter door
opening, wt.: 2.12 lbs. Barrel capacity: 1.16236 qt. / 1.1 liter
Wax Carver Plug Adapters:
Plug Adapters are available at no added charge when ordering a Kit. Maximum Media Load: 1 kg. (2.2 lb.)
Maximum Work Piece Load: 0.2 kg. (7.04 oz.)
Universal Voltage United Kingdom Euro Plug Australia Plug
Wax Carver Kits work on any (3 prongs, UKCA) (2 prongs, CE ) (2 prongs) 100 – 240 Volt Universal Voltage Specify Plug option as shown below:
voltage from 100V to 240V. Add –21 Add –22 Add –26
to Part No. to Part No. to Part No.
Compact Control Box i The RT101 Rotary Tumbler has a 2 year limited warranty. It is designed for
burnishing or shot tumbling of gold, silver and other metals. Any application
A-WT-87 $62.46 if purchased separately other than the intended use may void the warranty. The Tumbler Barrel CPRT-
2-1/2" x 2" (64 x 51mm) 111 has a 1 year warranty and should never be used with ammonia, acetone,
trichloroethylene, gasoline or alcohol based cleaners or solutions which will
Replacement Parts: Replacement Plug Adapters void the warranty.
Handpiece Cord (41" from metal tip to tip)
A-WT-86 $28.23 UK 3-prong A-WT-UK $6.61 Power Plugs for regions outside North America may be ordered by
adding the following numbers in red to the end of the part numbers.
Handpiece A-WT-82 $123.73 Australia 2-prong A-WT-AUS $5.20
For example: RT101-21 for United Kingdom
Cork Cap for Handpiece A-WT-84 $13.10 Europe 2-prong A-WT-EU $5.20
K.3340
K.3390
Bench Lathe Kit with Filter Hood
Designed to work with the Bench Lathe, MAFH25 Filter Hood has strong suction power for
removing particles of dust and reclaiming precious metal. Made of powder coated, heavy
gauge steel, it has a removable metal water-tight tray, gooseneck mounted bright, long
lasting LED light, and clear acrylic shield. Comes with three easy to change filters (1ea
pleated, polyester and charcoal) that are easy to ship to a refiner. 21.1 lb pkg wt.
Kit Includes M.BL Bench Lathe with A-TM-5 and A-TM-6 Tapered Spindles, plus
MAFH25 Filter Hood
K.3280 $588.59
K.3280
Manufacturing, LLC
26
26A
26 $571.00
16B 16B-1
46
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Lathes and Grinders by Handler Manufacturing
18 Atlas Precision Chuck
The 18 Atlas chuck is a precise "Jacobs type" chuck for use with
chuck accessories having a diameter of .001" [0.03mm] to .250"
[6.4mm]. The 18 Atlas chuck attaches to the right shaft of a Handler
lathe with standard dental tapered shafts. Machined to precision
limits, the 18 Atlas provides the technician with concentricity
18 unmatched by any other adjustable chuck with no run-out and no
vibration. For Right shaft only.
Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 2 1/2" L x 1 1/4"
Shank Diameter [6cm x 3cm] 704
18 $154.40
7 704 Sani-Grinder
7L / 7R Tapered Steel Chuck • Built for shaping, grinding and polishing orthotic appliances.
The 7 tapered chuck is designed specifically for use with buffing • Low speed allows for shaping and reduction of plastics, foams
wheels, brushes and lead centered wheels. Precision manufactured of and leather.
alloy steel, this chuck is built for placement onto lathes and polishing • High speed provides polishing and faster reduction of orthotic
motors containing standard dental tapered shafts. For use with Handler appliances, podiatric and other materials.
Lathes.
• The integral rear suction filter bag is easily removed and emptied
Specify 7L (Left) or 7R (Right) when ordering. with the aid of an encased zipper.
Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8" Shipping Wgt.: 50 lbs [22.7 Kg].
Shank Diameter x 3 5/8" L [2cm x 9cm] Unit Dimensions: 15 1/2" L x 8" W x 9 1/4" H [39cm x 20cm x 23cm]
7L or 7R $14.58 704 $1156.64
7B
7BL / 7BR Tapered Brass Chuck
The 7B tapered chuck is designed specifically for use with buffing
wheels, brushes and lead centered wheels. The 7B Tapered chuck is
made of brass to provide easier on/off placement onto tapered dental
shafts, causing less shaft wear. For use with Handler Lathes.
Specify 7BL (Left) or 7BR (Right) when ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions: 5/8" Shank Diameter x 3 5/8" L [2cm x 9 cm]
7BL or 7BR $17.97
A.16 $571.00
P16-21H Mandrel (1/32) P16-20 Mandrel (1/64) P16-19 Stone Chucks P16-8 Collet Wrench
P16-15 Arbor Band Chuck P16-16 Spiral Tapered Chuck P16-10RW Clutch
Handler #16 Chuck Changer
– comes with accessories
47
Polishers and Trimmers by Handler Manufacturing
Manufacturing, LLC
575
575-0
Designed & Built by Handler in the U.S.A. Affordably priced significantly lower than other competitive units. Easy operation for dry grinding,
or polishing with pumice using the pumice pans. Powerful suction system protects user with safer, healthier environment. (Helps to meet
OSHA standards). 115V/60Hz.
Shipping Wgt: Sku 575 is 115 lbs (Shipped in two cartons), Sku 575-0 is 75lbs.
Unit Dimensions: 32" W x 16" H x 21" D
575 (Includes 26A Red Wing Lathe) $2256.05 575-0 (Does not include lathe) $1856.75
48
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Polishers and Trimmers by Handler Manufacturing
31 Model Trimmer
"The Professional" A 10" [25cm] diameter model trimmer powered by a full 1/3 HP ball bearing,
capacitor start motor. Features include a swing-open front housing for ease of cleaning and wheel
changing, internal gutter to facilitate water runoff, full wheel radius water spray for efficient wheel
cleaning, drain trough which completely surrounds the model tray to prevent water leakage, large
1" [2.5cm] diameter water exhaust, motor cover with removable top plastic utility tray. Unit shipped
complete, ready to use with minor set-up. Finished with a durable, baked coating. 115V/60Hz.
Shipping Wgt.: 48 lbs [21.8 Kg] Unit Dimensions: 16" D x 13" W x 12-3/4" H [41cm x 33cm x
32cm]
31 $970.30
60FC-TS
PTL-215SP
MADCH-6 $204.20
Elbow is
Foredom’s Fishmouth with bench included –
Comes with three filters pin, acrylic shield, and adjust- Hose is not
able arm rests attaches to the
workbench for dust control and debris
MAFH25 $359.16 removal. The exhaust port fits a 2-1/4"
hose and comes with an elbow to position a
The Filter Hood was designed to work with Foredom's M. BL Bench Lathe, larger lathes or dust collector hose as needed.
a flex shaft or micromotor handpiece. It is ideal for use in jewelry, dental labs, industrial, The curved acrylic shield gives a clear view of your work
or light woodworking to filter dust and larger particles from light grinding and polishing. and also helps keep particles away from your face. A mounting
The MAFH25 has a variable speed, universal voltage motor for either 110V or 220V and is bracket inside the Fishmouth holds the Wooden Bench Pin Assembly that
UKCA & CE compliant. comes with it.
Constructed of powder coated, heavy gauge steel, it has a removable metal water-tight Included: Fishmouth, Bench Assembly, Wooden Bench Pin, Elbow, Mounting Brack-
tray, gooseneck mounted bright, long lasting LED light, and a clear acrylic shield. Comes et and Acrylic Shield
with three filters (1ea pleated, polyester and charcoal) that are easy to change and ship to
a refiner. 2-Year Limited Warranty Excluding shield.
Fishmouth: 9-1/2" wide at back, 6" wide at front, Depth: 8-3/4" front to back,
2-Year Limited Warranty Excluding shield. Universal Voltage: Specify power plug. 9" high from bottom of metal exhaust port to back.
Dimensions without Lamp: 7-1/2" (19 cm) Cord Length: 67" Curved Shield: 8" wide at top, 5" wide at bottom, 10-1/2" high.
high, 6" (15.3 cm) wide, 12-3/4" (32.3 cm)
Gooseneck Lamp: 16-7/8" (424mm) long, Fishmouth with Bench Pin Assembly:
deep.
6.4 lb wt, 8 lb pkg wt, 13.75" long, x 13.25" deep x 8.5" high shipping dimensions.
Tray interior: 5-3/4" (146mm) long x 4-1/4"
i
Weight: 9.0 lb, 10 lb pkg wt,
(114mm) wide x 1/2" (12mm) high Fishmouth mounts with a GRS style mounting bracket.
Sound Level: 62 dBA
Filters: 5-13/16" (153mm) wide x 5-7/16"
Rating: 80 CFM
Dust Hood
MADCH-1 $61.26
MAFH25 Replacement Parts: Part No. Price Hood is made of heavy gauge sheet metal
Motor Brush Pair MP251P $10.81 construction with non-skid pads on the bottom
5A Fuse for older units with rocker switch & knob on top MAFH110 $5.20 and holes for mounting on workbench, (screws
NOT included).
3A Fuse for current units with one knob on top only CP10513 $5.20 2-1/4" (57 mm) elbow MA825 fits MADC20
Splash Tray MAFH105 $18.62 Dust Collector or other dust collection hoses.
5-pks of Filters: 6-1/2" (16.5 cm) high x 4-5/8" (11.7 cm) wide
Pleated Heavy Paper for fine particles: 14 Merv Rating, MAFH109-5 $26.42 8-5/8" (21.9 cm) deep, 1.85 lb pkg wt.
Traps & Holds 95% or more of particles 3.0-10 micron and 85% of 0.3-1.0 micron
2-Sided Carbon & Polyester on other side for fine to MAFH108-5 $10.21
medium particles: 13 Merv Rating, Traps & Holds 90% or better of particles 3.0-10
micron and less than 75% of 0.3-1.0 micron
100% Polyester on both sides for coarser particles: MAFH107-5 $8.40
Components also available for purchase separately.
8 Merv Rating, Traps & Holds 70%- 85% of particles 3.0-10 micron
5-pc Assortment 2 ea Poly and Poly/Carbon and MAFH120 $13.21 Wooden Bench 4-1/4"
one Pleated Paper Pin Assembly 3-1/8" Wooden Bench MABP $35.98
MABP Pin Assembly
Wooden Bench Pin A-WB $6.61
Specify Plug Options for regions outside North America Elbow fits any 2-1/4"
Add the following numbers in red to the end of the part numbers. For example: diameter hose MA825 $12.01
MAFH25-21 for United Kingdom, UK CE compliant 2-3/4"
1-5/8"
Mounting Bracket MA604 $21.63
Foredom’s Lighted Work Chamber is compact, semi-enclosed and designed for use
with our MADC20 or other dust collector and compressed air.
The chamber offers excellent visibility and keeps dust and debris contained when 21" high x 22-3/4" wide Elbow is
grinding, sanding, polishing and drilling small workpieces for dental and other lab 23" deep including hose port in back included –
technicians, jewelers, carvers, and fabricators. Hose is not
The compressed air nozzle swivels and air flow can be adjusted from low to high and
directed to funnel dust and debris away from the workpiece, through the back of the
Huge and semi-enclosed!
chamber and into a dust collection system. Use it with MADC20 Dust Collector or other dust collection system. It comes with a
bright LED light with magnetic base that can be repositioned in the work chamber.
2-Year Limited Warranty Excluding shields.
Easier to keep dust and debris under control when carving, grinding, sanding, polishing
and drilling. Large enough for Foredom's M.BL bench lathe to fit inside, it is also
Features: ideal for sifting enamel with the shield up and the dust collector set to low – medium
Pivoting LED Light vacuum speeds. Arm openings with padded arm rest offer easy access. Shield and
LED Light offer excellent visibility. Chamber ships in a flat box and is easy to assemble.
Compressed Air Nozzle varies the flow of air up to 90 PSI or 6
Bars. Angle it to blow dust and shavings off the workpiece. 2-Year Limited Warranty Excluding shield.
Vacuum Port has 2-1⁄4" diameter connection for hose to a Features:
MADC20 Dust Collector, shop vac or other device. MAML10 LED Light 200 lumen daylight
quality 5-bulb fixture on magnetic
Remote Switch with 2-pin style plug outlet for dust base. Magnetic On/Off remote
collectors with a remote on/off switch is located in the back. switch box can be placed outside the
Power Switch for the light at the front can also remotely chamber. Universal voltage, 7 Watts,
activate a separate dust collector if a remote is used. 50/60 Hz, CE
Universal Voltage 115V / 230V,
Acrylic Shields are hinged and adjustable.
Power plug part number options on
Magnetic Work Rest cylinder shaped rest with felt covered opposite page are for regions outside North America.
magnet at bottom, 1-1/2" diameter x 3/16" thick rubber insert Vacuum Port and Elbow fits a 2-1⁄4" diameter hose for
on top for workpieces. Includes 2 extra rubber inserts. right or left side hook up to a dust collection system.
1-5/8" diameter x 1-5/8" high overall dimensions.
Shield is hinged at the top and secured with magnetic knob
Magnifier – 2-1/2x with 10x insert for closer work is 5" in at the bottom.
diameter and hinged. A-MWR03 Magnetic Work Rest is cylinder shaped with
Watertight Tray is 10-1/4" x 6-5/8" with 5/8" lip is felt covered magnet at bottom, 1-1/2" diameter x 3/16"
removable for cleaning. thick rubber insert on top for workpieces. Includes 2 extra
rubber inserts. 1-5/8" diameter x 1-5/8" high overall
Outer Dimensions: 11-1/2" (29.21 cm) high, 11" (27.94 cm) dimensions.
wide, 10" (25.4 cm) deep, 11.0 lb, 14.25 lb pkg wt, Dimensions:
Inner Dimensions: 8" (20.32 cm) high, 10-1/4" (26 cm) wide, Outer: 21" high, 22-3/4" wide at bottom,
6-1/2" (16.51 cm) deep 12-5/8" wide at top, 23" deep including hose port in back
Inner: 20-1/2" high at front, 4-3/4" high at back,
Voltage: Dual 110 / 220V. Specify power plug. 20" wide at front, 3-3/4" wide at back
19-1/2" deep at center front to back
Wt: 19 lb including light, Pkg Wt 26.25 lb
MALC15 Lighted Work Chamber
Replacement Parts: Part No. Price Included: Priced if purchased separately
Elbow fits any 2-1/4" diameter hose MA825 $12.01 LED Light with MAML10 $118.92
magnetic base & cord
Magnetic Work Rest A-MWR03 $27.63
Replacement C7 Detachable cords are on page 28
Rubber Insert for top of A-MWD2 $5.20 Magnetic Work Rest A-MWR03 $27.63
Magnetic Work Rest, 1-1/2" diameter x 3/16" thick
Rubber Insert for top of A-MWD2 $5.20
4mm Air Hose, 10' long MALC220-10 $7.81
Magnetic Work Rest, 1-1/2" diameter x 3/16" thick
6mm Air Hose, 10' long MALC221-10 $9.67
Elbow fits any 2-1/4" diameter hose
4mm Hose Connector MALC219 $5.20 MA825 $12.01
6mm Hose Connector MALC218 $5.20
Union Reducer 6 mm to 4 mm MALC222 $5.90
51
Dust Collection - MADC20 Cyclone & Collection Chamber
MADC20 Dust Collector filters away dust & debris. Hose
It has a hepa filter, cyclone and collection chamber. Its great with Foredom work Port
chambers, dust hoods and most other work spaces with ports for a 2-1/4" hose.
Whether the work is grinding, sanding, buffing, filing or polishing on wood, stone, die-
stone, metal and plastic, this single station unit is whisper quiet, powerful and simple to
operate. The cyclone gives you ten times the filter bag life, minimizes maintenance
and improves the overall performance of the machine.
MADC20 $959.76
Cyclone
Features:
• Cyclone pre-filters 99% of all debris into the polycarbonate
collection chamber which is a clear container that is easy to empty
and re-install.
• 2 HEPA filters with Merv rating of 16 eliminate 99.98% of debris
down to 0.3 micron. Filters that meet the HEPA standard satisfy
certain standards of efficiency such as those set by the United Collection
States Department of Energy (DOE). 5′ Vacuum Chamber
• Whisper quiet sound level: 52dBA • Powerful suction at 115CFM Hose Assembly
• Variable Speed Dial controls the speed of the motor and power of the air
moving through the unit. The fan speed selected will depend on the job at hand.
• 5' Vacuum Hose is included. Additional extension hoses may be added, but longer
hose lengths will reduce the unit's suction.
• Top Connector is removable. • Deflector for aiming exhaust air.
• Remote Control with cord allows you to power on the dust collector without
reaching for the main power switch on the unit. The switch has a PSA backing for
positioning it conveniently within reach.
• 6' Power Cord
Power Inlet
• Move it where you need it with casters and top handle. with fuse
• 2-Year Limited Warranty
receptacle
Specifications:
Main Compartment: 19" high including Top Connector,
7-7/8" wide tower, 14-1/2" wide including Cyclone 14-5/8" deep.
Cyclone: 16-1/2" high, 7-1/2" diameter
Hose: 2-1/4" diameter, 5' Long
30-1/2 lb. wt, 40 lb pkg wt.
Shipping Dimensions: 20-1/4" x 20-3/4" x 23-1/4" Remote Cord
115 Volt / 6.5 Amp Remote for connecting Power
Switch to Foredom Cord
230 Volt CE / 3.2 Amp MALC15
with 9'
750 Watt / 115 CFM Cable or other
compatible
HEPA Filter: 16 Merv Rating, filters 99.8% of all particles 0.3 micron and larger. equipment
for remote
Included: Priced if purchased separately activation
Part No. Price
5' Vacuum Hose Assembly
with one coupling MADCVH-5 $31.23
HEPA Filter MADC205 $11.96
Canister Filter MADC208 $28.83
Motor Brush Pair, 115 Volt MP810P $24.02
Motor Brush Pair, 230 Volt MP820P $24.02
Specify Plug Options for 230 Volt
8 Amp Fuse for 115 Volt CP804 $ 5.20 Power plugs for regions outside North America may be ordered by adding the following
5 Amp Fuse for 230 Volt CP807 $ 5.20 numbers in red to the end of the part numbers. For example: MADC20-21 for United
Kingdom, UKCA & CE compliant.
52
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Mobile Work Station
Mobile Work Station with Powered Up/Down Motion Yoke mount
removed from
A footprint of only 16" x 22", makes the Mobile Work Station ideal for small Middle Shelf to
workspaces. Sturdy casters allow it to roll to where you need it. hold Micromotor
Foredom's Mobile Work Station helps fit a lot of functionality into small labs, studios and
workspaces. Its tower structure and built-in electrical outlets, allow multiple powered Mobile
devices to be in use. The motorized lift raises and lowers the top platform, for sitting, Work
standing or individual needs. It rolls on casters – wherever you need it. Station
Requires an electrical outlet for powering up the unit and connecting its 4-plug power MAWS10
strip. The unit comes assembled except for the middle shelf. The front pivoting 'kickstand'
enhances stability. 3-tiers offer multiple options for arranging your equipment. Top and $1079.88
bottom platforms, middle shelf and extension trays have a 1/4" lip to prevent tools from
sliding off.
• Top Work Platform is 14-3/8" square. It features extension trays that swing out to hold
workpieces and other small objects. Each tray is 8" x 4-1/4".
• Middle Shelf is 12-1/4" x 12-5/8". Includes a removable yoke for mounting a flexible
shaft motor. With the yoke removed, the shelf can hold micromotors and other tools.
• Lower Platform has a 15-5/8" x 9-3/4" tray for tools and storage. When removed,
it reveals holes designed to securely mount Foredom's MADC20 Dust Collector with its
casters removed.
2-Year Limited Warranty
Specifications:
Height from Floor to Top Work Platform: 43-3/4" at highest setting, Tray removed for
30-1/2" at lowest setting Lower Platform to
Footprint: 16" x 22" hold MADC20 Dust
Collector at left
Weight: 44 lb, Ship Weight: 53 lb via UPS
Shipping Dimensions: 34-1/2" x 22-1/4" x 20"
Heavy Duty
Power Cord: 6' Long Pivoting Casters
Power Outlets: 4 North American 3-prong outlets, max 9.6 Amps Kickstand
Top Work Platform
Universal Voltage: 110/220 Volt, 50/60 Hz
Extension Trays
Comes with US plug. Specify 220V power cord plug.
K.WS3
$2222.22
Mobile
Work Station Power On/Off Control Up/Down
equipped with:
MALC15 4 Power Outlets Use it while standing or sitting
Lighted Work
Chamber (page 51)
and MADC20
Dust Collector
opposite page
Flexible shaft machine
not included
53
Dust Collection and Splash Hoods by Handler Manufacturing
Manufacturing, LLC
54
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Dust Collection and Splash Hoods by Handler Manufacturing
550
52CSU
3M Particulate Respirators
A-6106-5 $28.16/5pk
Pack of five particulate respirators with metal
nose strip and elastic straps. Foredom Logo Apron
Comfortable, lightweight and convenient. Has W.Apron-F $24.02
Cool FlowTM Exhalation Valve for work in heat and Foredom’s full-size apron comes in deep navy
humidity. Not intended as a medical respirator. with a metallic silver logo has adjustable neck,
extra long 40" ties and divided pocket. Protects
your clothes from dirt and debris while working.
Practical and attractive, Made of 65/35 poly
cotton twill – 7.5 oz. Washable
23" Wide x 34" Long.
Safety Glasses
A-SG3 $21.44
Clear polycarbonate glasses with a
contemporary style and unitary lens
design. Temples are length adjustable
with slotted ends.
Splashback Kit
AK103 $19.64
The Splashback Kit helps prevent water infiltration into the handpiece.
When drilling or grinding stone, glass, and ceramics with diamond points you must use a
coolant, such as water. If water gets into the handpiece the bearings will corrode, damaging
the handpiece and voiding your warranty. This simple, convenient kit includes the perfect
size O-rings (to fit both 1/8" and 3/32" shank burs) baggie, rubber band and instructions
for use. You should also use canned or compressed air after each use with water to dry the
handpiece. Bur and handpiece not included.
56
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Rotary Accessory Assortment Kits
Jewelers Kits i
*We reserve the right to substitution
Empty Bur Holders WITHOUT accessories on page 73
V Stones easily cut hard metals, tile, porcelain, stone, and wood. For: titanium, i Made in USA. 45,000 RPM Max Speed
chrome-cobalt, nickel-cobalt, tool steel, and stainless steel, and softer metals such
as lead, pewter, brass, and aluminum with minimal smearing and loading. Also: ce-
ramic tile, porcelain, wood, acrylic, glass, and marble. They can shape, texture, and CeramCut Blue Stones are widely used on wood, hard metals and porcelain. They have
provide detail to carvings. Their coarser grits make them more aggressive than our a unique ceramic and aluminum oxide grain structure. Excellent for hard metals, including
CeramCut Blue Stones. They are an economical alternative to plated and sintered hardened and mild steel, steel alloys, chrome cobalt, titanium, platinum, and other ferrous
diamond points. Made with a vitrified, self-sharpening, special aluminum oxide metals. CeramCut Blue Stones maintain their shape and hold their cutting edge longer
grain with a super hard porous bond, V Stones are the coolest running and longest than any standard abrasive stones. They are non-impregnating and non-contaminating.
lasting abrasive stones. 1/8" shank CeramCuts on facing page.
Part Price Head Overall
Grit No. Each Shape Diameter x Length Length
overall length overall length Shape Part Price Grit Head Overall
No. Each Diameter x Length Length
40/60 A-V326 $6.23
Bud 1/4 x 3/8" (6.4 x9.5 mm) 1-7/8" / 47.6mm Large
80 A-V327 $6.25
Ball A-CK300 $5.71 80 1/4 x 1/2" (6.4 x 13 mm) 2" / 50.8 mm
Nose
40/60 A-V336 $6.13 Medium
Ball 3/8 x 3/8" (9.5 x9.5 mm) 1-7/8" / 47.6 mm
80 A-V337 $6.13 Ball A-CK301 $5.71 120 3/16 x 1/2" (4.8 x 13 mm) 1-15/16" / 49.2mm
Nose
80 A-V397 $6.06 Flat top 1/4 x 1/2" (6.4 x 13 mm) 2" / 50.8 mm
Taper Large Inverted
Cone A-CK375 $5.49 120 1/4 x 1/4" (6.4 x6.4 mm) 1-3/4" / 44.5 mm
Ball A-CK332 $5.49 120 1/8 x 1/8" (3.2 x 3.2 mm) 1-5/8" / 41.3 mm
CeramCut Blue Stones 9-pc Kit Small A-CK352 $5.49 120 3/32 x 1/4" (2.35 x 6.4 mm) 1-3/4" / 44.5 mm
AKHK29 $33.03 Cylinder
3/32" (2.35 mm) Shank Tapered
Wheel A-CK360 $5.59 120 1/2 x 1/8" (13 x 3.2 mm) 1-3/4" / 44.5 mm
A-CK300 Lg Ball Nose Med
Large Flat
A-CK301 Med Ball Nose Fine Taper A-CK390 $5.71 120 1/8 x 1/2" (3.2 x 13 mm) 1-15/16" / 49.2 mm
A-CK302 Sm Ball Nose Fine
A-CK318 Flame Med Small Flat
Taper A-CK392 $5.62 120 3/32 x 3/16" (2.35 x 4.8 mm) 1-3/4" / 44.5 mm
A-CK322 Inverted Cone Fine
A-CK332 Ball Fine Round Top
Taper A-CK396 $5.54 120 1/8 x 1/2" (3.2 x 13 mm) 1-15/16" / 49.2 mm
A-CK342 Tapered Cone Fine
A-CK352 Sm Cylinder Fine Round Top
Taper A-CK398 $5.54 80 1/8 x 1/2" (3.2 x 13 mm) 1-15/16" / 49.2 mm
A-CK392 Sm Flat Taper Fine
58
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
CeramCut Blue Stones - 1/8" (3.18 mm) shank
Widely used on hard metals, porcelain and wood.
They have a unique ceramic and aluminum oxide grain structure. Excellent for hard metals, including hardened and mild steel, steel alloys,
chrome cobalt, titanium, platinum, and other ferrous metals. CeramCut Blue Stones maintain their shape and hold their cutting edge longer
than any standard abrasive stones. They are non-impregnating and non-contaminating.
3/32" (2.35 mm) shank CeramCuts on previous page.
Smaller heads:
1/8" (3.18 mm) shank mounted points
Flame A-CK8318 $5.39 80 5/32 x 3/8" (3.9 x9.5 mm) 1-7/8" / 47.6 mm
A-CK844 Taper Fine
A-CK852 Tree Fine
Small A-CK8332 $5.35
120 1/8 x 1/8" (3.2 x 3.2 mm) 1-5/8" / 41.3 mm A-CK890 Ball Nose Med
Ball
A-CK897 Flat Taper Fine
Flat A-CK897 $6.51
120 3/32 x 3/8" (2.35 x 9.5 mm) 1-7/8" / 47.6 mm
Taper
A-10065 $11.48
Ball A-CK890 $6.55 80 1/2 x 1/2" (13 x 13 mm) 2" / 50.8 mm 2" CeramCut Blue Cup Wheel with
Nose 3/8" arbor hole, 100 grit.
59
Aluminum Oxide Abrasives
Aluminum Oxide mounted points - 3/32" (2.35 mm) shank
$2.76 each Made in USA. 35,000 RPM Max Speed. Red Aluminum Oxide White Aluminum Oxide
Overall Length
Part
No. Grit Color / Grit
Head
Diameter x Length
Overall
Length
mounted points mounted points
Used for fast cutting on high tensile, Have extra fine abrasive grit (400) for
A-1 120 Red / Medium
1/8 x 7/32" (3.2 x 5.6 mm) 1-3/4" / 44.5 mm tough materials. extremely fine cutting and for high
A-71 400 White / Fine finishes on high tensile materials.
Use them on steel, malleable iron,
porcelain and glass. For medium to fine They work well on tough materials
A-2 120 Red / Medium
5/16 x 1/32" (7.9 x .79 mm) 1-3/4" / 44.5 mm finishing work. Be sure to specify Red including gemstone, stainless steel and
A-72 400 White / Fine Part Nos. when ordering. glass. Points hold their geometry well.
Be sure to specify White Part Nos. when
ordering.
A-3 120 Red / Medium
1/4 x 11/32" (6.4 x 8.7 mm) 1-7/8" / 47.6 mm
A-73 400 White / Fine Kits below contain one of each of the 18 points shown as left.
A-9 120 Red / Medium 3/8 x 3/64" (9.5 x 1.2 mm) 1-3/4" / 44.5 mm
A-79 400 White / Fine
Mandrel
A-10 120 Red / Medium
5/32 x 7/32" (4 x 5.6 mm) 1-3/4" / 44.5 mm required,
A-80 400 White / Fine not included.
Red Aluminum Oxide Unmounted Wheel
A-11 120 Red / Medium
1/4 x 5/64" (6.4 x 2 mm) 1-5/8" / 41.3 mm A-G27 $1.44 21,000 RPM Max Speed
A-81 400 White / Fine 80 grit, 3/4" (19 mm) x 13/64" (5.2 mm) with 1/16" arbor hole. Use for grinding,
cleaning & smoothing hard materials such as steel and malleable iron.
A-12 100 Red / Medium
13/64 x 13/64" (5.2 x 5.2 mm) 1-3/4" / 44.5 mm
A-82 400 White / Fine Use with Mandrels: A-M1, A-M6 (shown), A-M13, A-M15, A-M19.
See Page 84-85
i 20,000 RPM Max Speed • The diamond abrasive particles stay cool, preventing heat from melting the nickel
plating or binder which holds them on the accessory.
• It keeps the workpiece cool so that it does not fracture from the heat.
61
Diamond, Ruby and Other Abrasives
Diamond Hones Premium Ruby Carvers
Dress and reshape mounted abrasive points by lightly touching a rotating Have 2.35 mm (3/32") shanks and ruby crystals in fine or standard grit, bonded to
point to the diamond hone surface. the metal frame.
Also for hand smoothing and shaping glass, metal, stone, bone, and plastic. Long lasting Fine Grit Ruby Carvers provide a smooth finish on hard materials such as
Use for sharpening chisels and steel instruments. Made in USA. steel, porcelain, glass, acrylic, soft and precious metals, and wood. Standard (Coarser)
3/4" x 2" diamond pad on 6" plastic color coded handle. Grit Ruby Carvers provide faster material removal, leave a slightly rougher finish and are
well suited for woodcarving.
Part Price Handle
No. Each Color Grit / Description i Made in Switzerland. 35,000 RPM Max Speed
A-10342
$11.65 blue 1200 / Superfine Part Head Overall
No. Diameter x Length Length
A-10343
$11.65 red 600 / Fine overall length
Fine Grit: $14.53 each
A-10344
$11.65 purple 400 / Medium
A-RC15 4.5 x 4.5 mm 44.5 mm
A-10345
$21.44 black 250 / Coarse
A-RC19 3.3 x 8.0 mm 47.6 mm
A-RC20 4.0 x 10.0 mm 47.6 mm
Needle File Sets with plastic coated handles A-RC16C 6.5 x 12.0 mm 47.6 mm
come packed in a sturdy reusable
plastic case.
A-RC32C 5.5 x 10.0 mm 47.6 mm
Fine Point 5-Pc Set
A-F37352 $22.20
Set includes: Round Taper, Triangle Taper, Square Taper, Larger Round Taper, and A-RC34C 5.5 x 10.0 mm 47.6 mm
Half Round Taper.
A-RC36C 5.5 x 13.0 mm 47.6 mm
62
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Silicone Abrasive Mounted Points
Head Multi-Pack
Extra long-lasting polishing points have silicon carbide, silicon dioxide, and Fine Part No. Shape Diameter x Long Quantity / Price
aluminum oxide abrasive compound in a silicone binder. They leave a smooth
finish on precious metals, stone, and ceramics. Choice of seven different grits. A-MP309-24 Bullet 5 x 16 mm 24 pack / $24.98
2.35 mm (3/32") shanks for use in handpieces. A-MP316-24 Flame 4 x 12 mm 24 pack / $24.98
A-MP205-12 Wheel 12 x 2 mm 12 pack / $12.50 A-MP360-24 Flat Top Taper 6 x 16 mm 24 pack / $24.98
A-MP345-24 Ball Nose Taper 8 x 20 mm 24 pack / $31.25 A-MP312-24 Bullet 5 x 16 mm 24 pack / $24.98
A-MP319-24 Flame 4 x 12 mm 24 pack / $24.98
A-MP359-24 Flat Top Taper 6 x 16 mm 24 pack / $24.98
A-MP333-24 Flame 8 x 18 mm 24 pack / $24.98
A-MP186-12 Ball Nose 13 x 18 mm 12 pack / $31.25 A-MP361-24 Flat Top Taper 6 x 16 mm 24 pack / $24.98
A-MP380-12 Knife Edge Wheel 12 x 0.8 mm 12 pack / $12.50 A-MP375-24 Cylinder 8 x 20 mm 24 pack /$31.25
A-SW235-50
Head Multi-Pack Medium
Extra Coarse Part No. Shape Diameter x Long Quantity / Price
A-MP349-24 Ball Nose Taper 8 x 20 mm 24 pack /$31.25 Part No./Grit Use Rubber Bonded Abrasive (silicon car-
bide) Wheels for light de-burring, cleaning,
A-RWF-50 smoothing and polishing. Ideal for hard-to-
A-MP363-24 Flat Top Taper 6 x 16 mm 24 pack / $24.98 reach areas on ferrous and non-ferrous
Fine
alloys and other materials.
A-MP377-24 Cylinder 8 x 20 mm 24 pack / $31.25 $15.61 / 50 pack 1/16" Arbor Hole
A-RWM-50 22 mm (.866") diameter x 3 mm (.118") thick
A-MP190-12 Ball Nose 13 x 18 mm 12 pack / $31.25 Medium 1/16" arbor mandrels for rubber and
silicone abrasive discs
See page 84-85 for mandrel details.
A-MP385-12 Knife Edge Wheel 12 x 0.8 mm 12 pack / $12.50 A-M1
A-RWC-50 A-M6
A-MP211-12 Wheel 12 x 2 mm 12 pack / $12.50 Coarse
A-M13
A-M15
A-M19
A-RWEC-50
Extra Coarse
64
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Rubber Abrasive Mounted Points
Rubber Abrasive Mounted Points 12-pc Rubber Abrasive
Polishing points have silicon carbide, silicon dioxide and
aluminum oxide abrasive compound in rubber binder for a smooth finish on Polishing Assortment
precious metals, stone and ceramics. Available in four different grits with 2.35 mm AK11990
(3/32") shanks for use in handpieces. $19.06
i 5,000-12,000 RPM Max Speed
Sold in Multi-Packs as listed. Mounted Points have
2.35 mm (3/32") diameter shanks
Wheels: 23 x 1 mm (.905" x .039").
Flames and cylinders: 3 x 7 mm (.118" x .275").
Includes one of each shape per grit.
Grits are: Blue – Extra Fine, White – Ultra Fine, Brown – Fine, Black – Coarse
A-MP054-24 Inverted 9 x 8.5 mm 24 pack / $31.25 A-MP088-24 Inverted 9 x 8.5 mm 24 pack / $31.25
Cone Cone
A-MP063-12 Wheel 15 x 0.8 mm 12 pack / $15.61 A-MP097-12 Wheel 15 x 0.8 mm 12 pack /$15.61
A-MP071-24 Inverted 9 x 8.5 mm 24 pack / $31.25 A-MP105-24 Inverted 9 x 8.5 mm 24 pack / $31.25
Cone Cone
A-MP080-12 Wheel 15 x 0.8 mm 12 pack / $15.61 A-MP114-12 Wheel 15 x 0.8 mm 12 pack / $15.61
65
Cut Off Wheels, Unmounted Abrasive Discs and Brushes
Rubber Bonded Discs 2" Unmounted Nylon & Wire Brushes
Used for grinding, smoothing, and cleaning glass, high speed steel, and other for use in Handpieces or Bench Lathe
tough materials. Fiberglass Reinforced Cut Off Wheels are used to cut-off, groove,
and trim metal, wood, and ceramics.
Diameter
Part No. Price Grit x Thick
Arbor Max Speed
Hole RPM
i 18,000 RPM Max Speed
Made in USA
A-D1-5 $4.20/5-pk 90 7/8" x .023" 1/16" 30,000 Soft nylon Unmounted Brush is used at very low speeds for
cleaning up "fuzzies" left behind on delicate carvings without
Rubber Bonded Discs – Use Mandrel A-M1 or A-M6 in Handpiece
removing fine detail. Use with a mandrel on a handpiece or
mount directly onto tapered spindle of the BL Lathe. 3/16" arbor
hole.
A-D2-5 $4.47/5-pk 90 1-1/4" x .062" 1/16" 30,000 A-W301 $8.65
Rubber Bonded Discs – Use Mandrel A-M13 or A-M19 in Handpiece Steel Wire Brush is for texturing, removing rust and corrosion,
edge blending and polishing of cast or machined metal surfaces
or hard-to-reach areas. 1/4" arbor hole Use with mandrels in
flex shaft handpieces, see page 84 or A-WM-5, A-WM-6 Wheel
A-D6 $1.86 60 1-1/4" x .050" 1/16" 30,000 Mandrels on the M.BL Bench Lathe, see page 45.
Fiberglass Cut Off Wheel – Use Mandrel A-M13 or A-M19 A-W302 $14.41
in Handpiece
A-M83 1/8"
66
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Step, Twist & Carving Drills – Premium Grade
Head
Part No.Diameter
Steel Step Drills Wire Head PRIMO® mm
Part No. Gauge Length Cobalt Steel
2.35mm (3/32") shank Size mm A-8005 .5
45mm (1.8") Overall Length
Step Drills A-8006 .6
$3.85 each $10.10 each A-8007 .7
i
A-58005P 76 8.5 These solid cobalt A-8008 .8
30,000 RPM Max Speed
A-58006P 73 8.5 steel drills outlast A-8009 .9
A-58007P 70 8.5 high speed steel A-8012 1.2
Length
A-58009P 65 8.5 (HSS) bits 15 to 1. A-8014 1.4
Diameter 10mm head length A-8015 1.5
A-58010P 61 8.5
A-8016 1.6
30,000
i
Made from hardened tool steel. Use for A-58011P 57 10.5 A-8017 1.7
drilling all types of wood, precious metal, A-58014P 54 10.5
RPM Max
Speed A-8018 1.8
mild steel, bone, and mother of pearl. A-58015P 53 11.0 A-8021 2.1
See Wire Gauge Chart on right $4.02 each A-8022 2.2
A-58020P 47 11.0 A-8023 2.3
A-58022P 44 11.0 Head
Diameter
Part No.
Wire mm
Gauge A-8107 .7
PRIMO Diamond Plated
®
Part No. Size
PRIMO ®
A-8108 .8
Twist Drills $27.63/ 5-pack Diamond Plated A-8109 .9
A-8240 40
Wire gauge sizes #36 – #65 A-8245 45
Step Drills A-8110 1.0
$9.37 each A-8111 1.1
i
A-8247 47
20,000 RPM Max Speed A-8250 50 10mm head length A-8112 1.2
A-8251 51 Balance, precision A-8113 1.3
A-8252 52 and consistent A-8114 1.4
diamond coverage. A-8115 1.5
A-8251 A-8253 53
30,000 A-8116 1.6
A-8254
A-8256
54
56 i RPM Max
Speed
A-8117 1.7
A-8118 1.8
A-8265 A-8261 61 A-8120 2.0
A-8265 65 A-8121 2.1
2.35 mm (3/32") Shank $1.80 each 2.35 mm (3/32") Shank, 44.45 mm (1-3/4") Overall Length
44.45 mm (1-3/4") Overall Length $6.25 each Part Head
Part Head No. Shape Diameter x Length
No. Shape Diameter x Length A-203 Taper 1.19 x 4.37 mm
A-R2 Ball 1/32" / .79 mm A-208 Inverted Cone 1.6 x 1.6 mm
A-R5 Ball 1/16" / 1.6 mm A-240 Inverted Cone 2.35 x 1.6 mm
A-R7 Ball 3/32" / 2.35 mm A-204 Cylinder 1.6 x 4.37 mm
1/32" x 3/64"
A-P3 Inverted Cone A-207 Cylinder 1.6 x 4.37 mm
.79 x 1.19 mm
3/32" x 5/64"
A-P7 Inverted Cone
2.35 x 1.98 mm A-205 Ball Nose 1.19 x 3.97 mm
A-206 Ball Nose 1.6 x 3.97 mm
AK65 5-Pc Kit $16.86 Cross Cut
Includes one of each bur above. A-TR-5C Tree Point 2.35 x 6.35 mm
For etching, engraving, and other Cross Cut
fine details on metal, wood, glass,
ceramics, etc. Comes in small Carbide Ball Shape
Burs 39.69 mm (1-9/16") Overall Length
round bur holder with cover. Part Price Head
No. Each Diameter
A-212 $9.97 0.2 mm
AK212 15-Pc Kit
Miniature Twist Drills– Hobby Grade A-213 $9.97 0.3 mm Includes
$93.70
all ball shape burs
Miniature twist drills can be used in small pin vises that hold wire gauges or at slow
speeds in a rotary handpiece with A-M50 or A-MC2 micro chuck, see page 85. A-214 $6.25 0.4 mm
Wire gauge dimensions chart on previous page.
Speed Recommendations for Rotary Tools: Drilling speeds should be A-215 $6.25 0.5 mm
between 500 and 10,000 rpm. All drilling should be done with a lubricant. The
harder the material (metal) to be drilled and the larger the hole size, the slower A-216 $6.25 0.6 mm
the recommended drill speed.
A-217 $6.25 0.7 mm
Material RPM Range RPM Range
1 mm (1/16") Drill 2.35 mm (3/32") Drill
A-201 $6.25 0.8 mm
Aluminum 7,000 – 8,000 5,000 – 6,000
A-219 $6.25 0.9 mm AK211
7-Pc Kit
Mild Steel 3,000 – 3500 2,000 – 3,000 $44.81 Includes Carbide
Stainless Steel 1,000 – 2,000 500 – 1,000 Ball Shaped Burs: A-212,
A-220 $6.25 1.0 mm A-201,
A-215, A-217,
Brass, Silver, Copper 5,500 – 6,500 4,000 – 5,000 A-220, A-230, and A-202.
A-222 $6.25 1.2 mm
A-7145 $13.10 3/8" x 9/16" 1-1/2" A-CO-2 $13.70 Cone 1/8" x 5/8" 1-9/16"
A-7153 $15.38 3/8" x 1/16" 1-1/2" A-CO-3 $19.46 Cone 1/4" x 5/8" 2-1/8"
A-CP-1 $13.70 Cylinder 3/32" x 7/16" 1-9/16"
Carbide Cutting, Carving & Sanding Accessories Square
DuraGrit accessories are coated with super strong and long lasting tung- A-CP-3
$19.46 Cylinder 1/4" x 1/2" 2"
sten carbide grit that will not tear loose. Square
• Edges stay sharp and are thin enough for cut off applications.
A-CR-1
$13.70 Cylinder 3/32" x 7/16" 1-1/2"
• Use to cut, carve, sand and shape on wood, plastic, laminates, fiberglass, ceramic tile, Radius
kevlar, leather, rubber and styrofoam.
A-6613 A-CR-2
$13.70 Cylinder 1/8" x 9/16" 1-1/2"
AK6600 4-Pc Dura Grit Set $72.07 Cutting Wheel $21.63 Radius
Includes all four Duragrit burs in small square 1-1/2" diameter, 1/8" arbor
bur stand with clear cover. hole, 60 grit. Perforated A-CR-3
$19.46 Cylinder 1/4" x 1/2" 2"
surface for cool running Radius
– reduces clogging. Has
A-6611 thin kerf for deep, clean A-F-1 $13.70 Flame 1/8" x 1/4" 1-9/16"
Sanding/Shaping cuts in: wood, MDF &
Wheel $21.63 pine moulding, fiberglass, A-IC-1
$13.70 Inverted 1/8" x 3/16" 1-1/2"
1-1/4" diameter, 1/8" ABS plumbing, PVC pipe, Cone
arbor hole, 46 grit. rubber hose, laminate
For fast material flooring, etc. A-IC-2 $19.46 Inverted 1/4" x 1/4" 1-3/4"
removal, sculpt- Cone
ing, and sanding.
Mushroom shape can A-OV-1
$13.70 Oval 1/8" x 7/32" 1-1/2"
produce compound
curves.
A-OV-2
$19.46 Oval 1/4" x 3/8" 1-7/8"
A-TP-1
$13.70 Tree 1/8" x 1/4" 1-9/16"
Point
A-6621 A-6624
Hollow Cylinder $19.22 Tapered Point $15.62 A-TP-2
$13.70 Tree 1/8" x 3/8" 1-9/16"
1/8" diameter, 80 grit. Point
1/2" diameter, 60 grit. Can create Ideal for drilling in curved
channels, bevels and corners or surfaces and for detail
smooth rough surfaces. Like a 1/2" A-TP-3
$19.46 Tree 1/4" x 1/2" 2"
work in carving, modelling Point
sanding band but doesn't need a and general crafts.
mandrel. Has coarse grit on the
edge – doubles as a hole saw. A-TR-2
$13.70 Tree 1/8" x 1/2" 1-1/2"
Radius
A-TR-3
$19.46 Tree 1/4" x 1/2" 2"
Radius
69
Tungsten Carbide Burs – 3/32" and 1/8" Shanks
Typhoons have unique structurally aligned tungsten
carbide points that are long lasting and do not load quickly. 1/8" (3.18 mm) shank
Use BLUE fine grit for general shaping and sanding and RED coarse grit for even more rapid Blue Grit– Fine Red Grit– Coarse
and aggressive shaping and roughing out work. Ideal for use on hard and soft wood, acrylic,
plaster, hard rubber, fiberglass, and die stone in the dental lab industry. Part Price Head Overall
No. Each Shape Diameter x Length Length
i Made in USA.
35,000 RPM Maximum Speed A-KB18314 $23.23 Ball 5/16" x 5/16" 1-1/4"
A-KB18315
2.35 mm (3/32") shank, Blue Grit– Fine
Individual Burs $31.98 each
A-KB18338
$23.23 Ball 7/16" x 7/16" 1-3/8"
Part Head Overall A-KB18339
No. Shape Diameter x Length Length
A-KB32315 Ball 5/16" x 5/16" 1-7/16" A-KB18118 $25.76 Long Taper 3/16" x 3/4" 1-1/2"
A-KB18119
A-KB32119 Long Taper 3/16" x 3/4" 2"
A-KB18114 $23.23 Taper 5/16" x 1/2" 1-1/2"
A-KB32915 Taper 7/16" x 5/8" 1-3/4" A-KB18115
A-KB18834
$23.23 Rotor saw 11/16" x 3/16" 1-1/8"
A-KB18835
A-KB14734 $34.68 Ball 13/16" x 1-1/4" 2-1/2" A-KB14158 $26.47 Taper 9/16" x 1" 2-3/8"
A-KB14735 Nose A-KB14159 15º
without
Mandrel
3-Pc Typhoon Kit A-KB43544 $33.04 15/16" (3/4") x 1"
AK490 $87.10
1/4" shanks: A-KB14979 - large flame, A-KB14712 - with 1/4" shank
small ball nose, and A-KB14533 - smooth end cylinder. Mandrel A-SD144
A-KB43545 $36.03
with 6 mm shank
Mandrel A-SD662
A-KB43546 $35.82
71
Rotary Accessory Assortment Kits – 3/32" (2.35 mm) shank mounted
Developed and tested by Foredom.
These new assortments provide superb quality for polishing, buffing, grinding and cleaning on a wide variety of materials.
i 25,000 rpm
Max. Speed
i 10,000 rpm
Max. Speed
i
20,000 rpm Max. Speed
Forward Rotation ONLY
i 10,000 rpm
Max. Speed
92-pc Radial Disc Assortment (at left)
Discs, with thin bristles for hard to reach areas, do not require compounds. Abrasive
grains throughout the discs clean metal surfaces, remove light fire scale and oxide, finish,
blend, texture, pre-polish and polish precious and non-precious metal, acrylics, and
ceramics. Diameters are 25, 20 & 15 mm (.984", .787", .59") with 6 discs of each listed
below.
i
Includes 2— 3/32" shank Foredom A-M1 screw mandrels.
AK11986M $68.15
20,000 rpm Max. Speed
Color and grit listed below: *If you mount them
Forward Rotation ONLY
25 mm Dark green – 80 grit 20 mm Lavender – 600 grit in reverse
25 mm Dark blue – 120 grit 20 mm Light green – 1000 grit
on a left handed
mandrel (NOT
25 mm Red – 220 grit 20 mm Gray – 2500 grit included) they can
20 mm Dark green – 80 grit 20 mm White – 5000 grit be run in reverse.
20 mm Dark blue – 120 grit 15 mm Light green – 1000 grit
20 mm Red – 220 grit 15 mm Gray – 2500 grit
20 mm Brown – 320 grit 15 mm White – 5000 grit
72 20 mm Blue Gray – 400 grit
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Bur and Tool Holders
Large Bur and Tool Holders (No accessories)
Woodworkers Rotating Bur and Tool Holder
For 1/8" & 1/4" Shank Burs, Drill Bits 1/16"– 5/32"
Woodworkers Rotating Bur and Tool Holder organizes up to 112 accessories.
Stores: 92 – 1/8" shank & 13–1/4" shank burs. Has 7 marked holes for drill bits 1/16"
to 5/32". 3" deep x 2-3/4" diameter center cup holds small tools such as files and
screwdrivers.
A-10082 $27.36
Measures: 6-1/2" wide x 4" high (165 x 102mm). Burs not included.
i
For use in Handpieces
25,000 RPM Max Speed
i For use in Handpieces
25,000 RPM Max Speed
Wire Head Package
Head Part No. Bristle Diameter Quantity / Price
Part No. Bristle Type Diameter Price
Wheel-Shape - Wheel-Shape
A-MB22-12 White Goat 22 mm 12 pack / 7.72 A-MB27-12 Brass 19 mm 12 pack / $10.80
A-MB21-12 White Horse 14.2 mm 12 pack / 9.26
A-MB62-12 Brass 22 mm 12 pack / $11.85
A-MB23-12 White Horse 19 mm 12 pack / 7.72
i
metals, metal plate, precious metals, plastics, wood, acrylic, and painted surfaces. 25,000 RPM Max Speed / 5,000 RPM Optimum Speed
Made in Germany
Part No. Price Dimensions
10 x 20 mm
A-MS17-24 5 mm Bullet 24-pack / $21.88
Head Package
Part No. Diameter Quantity / Price
76
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Mounted Polishing Accessories and Compounds
Use 1/8" (3.18mm) shank mounted felt bobs for buffing and polish- Individual 1/8" (3.18mm) shank mounted felt bobs
ing with compounds on hard and soft metals, metal plate, precious
metals, plastics, wood, acrylic, and painted surfaces. Medium Hard
Density Price Density Head Overall
i 20,000 RPM Max Speed
Made in USA overall length
Part No. Each Part No. Diameter x Length Length
Emery (Black)
Contains coarse grit to remove surface imperfections, scratches,
rust, and burrs from iron, steel and other hard metals.
6.5 oz. bar A-4001 $3.37 19 oz. bar A-5001 $11.53
Tripoli (Brown)
Most popular compound for blending and contouring. Also for general cutting down, Emery Tripoli White
Diamond Red
scratch removal, and buffing on acrylics and non-ferrous metals such as zinc die Rouge
castings, brass, copper, aluminum castings and sheets. Rouge Platinum
Blue Platinum
4.5 oz. bar A-4002 $3.37
White
White Diamond Rouge Carnauba
Fast cutting on hard metals. Made with fine abrasive powder that produces a final
satin finish on chrome, stainless steel, carbon steel, brass, and aluminum. Also use to Select the right compound, for the material being worked to
remove rust, scale and carbon deposits on produce the desired finish. Polishing compounds come in standard
metal surfaces.
5.5 oz. bar A-4003 $3.37 17 oz. bar A-5003 $11.53 size bars.
Red Rouge
Produces a high luster on gold, silver, pewter, nickel plating and
plastics for final polishing.
5.75 oz. bar A-4004 $3.37 17 oz. bar A-5004 $11.53
Platinum Blue
For pre-polishing and cutting down of platinum and other metals.
5 oz. bar A-4007 $7.81 Platinum White and Red Rouge also
come in small tubes that are sized
Platinum White and priced right for trying out a
Unique formulation - only available from Foredom, for final polishing. Produces a deep new compound.
luster high color final polish on platinum, gold, silver, and all metals. Also for final
polishing on flexible partial material and acrylic.
5.75 oz. bar A-4006 $11.06 1 oz. tube A-40061 $3.00 Zirconia Polishing Compound
Carnauba The hardest natural wax available. Non-tacky and highly regarded for Mega - Dia-Z High gloss polishing compound for Zirconia as well as
its tough and wear resistant qualities. It is especially good for producing a high all ceramic materials. Not for oral surgery. Made in Germany
luster on wood and painted surfaces. 30 gram / 1.06 oz. jar A-4030 $155.93
2 oz. bar A-4008 $11.06 77
3M Scotch BriteTM Radial Bristle Discs – 9/16", 3/4", 1" diameter
Scotch-Brite Radial Bristle Discs have thin flexible bristles that get into
hard to reach areas without removing detail or making flat spots. No i Made in USA
30,000 RPM Max Speed in
compound needed. 3M Cubitron™ and aluminum oxide grains, embed- Forward Rotation ONLY*
Recommended Operating
ded throughout the bristles enable them to work faster and last far lon- Speeds:
ger than rubber wheels, regular brushes, buffs, or conventional sanders, For most applications is
generating little or no dust or heat. 3,000 – 18,000 RPM
For Woodcarving 5,000
Slower speeds allow greater flexibility and a softer touch with the bristles. Use the RPM
tips of the bristles with light pressure to extend the life of the accessory and achieve
more subtle results. Higher speeds provide more aggressive material removal.
For Jewelers and Dental Labs 3/4" diameter 1" diameter
These non-contaminating discs are ideal for cleaning metal surfaces, removing light with 1/16" arbor hole with 1/8" arbor hole
fire scale and oxide, finishing, blending, texturing, pre-polishing and polishing all 6-Pk 6-Pk $16.34
precious and non-precious metals, dental acrylics, flexite, and ceramics.
For Woodcarvers
Scotch-Brite Radial Bristle Discs are superior to sandpaper, flap wheels, or other
types of sanders, brushes, or abrasive wheels for many woodworking applications. 80 grit/yellow 36 grit/brown
Their flexible bristles can sand areas with detail, irregular, curved, or flat surfaces on A-4511-6
A-4532-6
soft or hard woods. Carvers can remove the "fuzzies" left behind without harming $12.97
any underlying fine detail. Coarser grits can be used to carve and texture, while the
finer grits will smooth, burnish, and polish.
*If you mount them in reverse on a left handed mandrel they can be run in reverse. 120 grit/white
A-4512-6
$12.97
50 grit/green
A-4533-6
9/16" diameter
with 1/16" arbor hole 220 grit/red
6-Pk A-4513-6
$12.97
Stack 6 or more
discs onto a mandrel
120 grit/white to make a brush.
A-4522-6 80 grit/yellow
Discs are not used
$12.97 individually 400 grit/blue A-4534-6
except when A-4514-6
working in very $12.97
220 grit/red
A-4523-6 narrow channels.
$12.97 See page 84 for
complete mandrel
information. Pumice
400 grit/blue (1,200 grit) pink
A-4524-6 A-4516-6 120 grit/white
$13.07 $12.97 A-4535-6
1/16" arbor mandrels
for 9/16" and 3/4" discs
Pumice see page 84
(1,200 grit) pink 6 micron
A-4526-6 (3,000 grit) peach
A-4517-6
$13.07
A-M1 $12.97
1" Assortment Kits
3/32" shank with Mandrels
6 micron
(3,000 grit) peach
A-4527-6
1 micron AK4530 25-pc kit $64.32
A-M6 (14,000 grit) 6 discs each of 36, 50, 80, & 120 grit
$13.07 1/8" shank light green + A-M20 (1/8") mandrel.
1 micron A-4518-6
(14,000 grit) A-M15
$12.97 AK4539 10-pc kit $24.93
light green 1/8" shank 3 discs each of 36, 80, and 120 grit
A-4528-6 3/4" Assortment Kits + A-M20 (1/8") mandrel
$12.97 with Mandrels
1/8" arbor mandrels for 1" discs
AK4510 38-pc kit $78.68 see page 84
6 discs each of 80, 220, 400, Pumice,
6 micron, and 1 micron + A-M1 (3/32") A-M2
9/16" Assortment Kit with Mandrel and A-M6 (1/8") mandrels 3/32" shank
AK4520 37-pc Kit $77.36
6 discs of each of 120, 220, 400, AK4515 26-pc kit $49.93
Pumice, 6 micron, & 1 micron + 6 discs each of 80, 120, 220, 400, and + A-M14
A-M1 mandrel (3/32") A-M1 (3/32") and A-M6 (1/8") mandrels 1/8" shank
i
2" Discs 30,000 RPM Max Operating Speed
Recommended Speed for most applications is 3,000–18,000 RPM
3" Discs 20,000 RPM Max Operating Speed
Recommended Speed for most applications is 2,000–18,000 RPM
120 grit
Made in USA white
A-4543-6 120 grit
white
with Handpieces use 1/4" shank mandrels: A-4553-6
see page 84
220 grit
red
A-4554-6
400 grit
blue
A-4545-6
6 Micron
3,000 grit
peach Pumice
A-4547-6 1,200 grit
pink
A-4556-6
1 Micron
14,000 grit
light green
A-4548-6
6 Micron
3,000 grit
peach
A-4557-6
1 Micron
14,000 grit
light green
A-4558-6
79
Sanding Papers and Sticks
Wet/Dry Micron Graded Polishing Papers Sanding Sticks $7.16 each
Sanding sticks (9-7/8" long x 3/4" wide) with 5" x 3/4" sanding surfaces. Each stick has
3M Wet/Dry Micron Graded Polishing Papers have super 10 strips of quality sandpaper (5 on front - 5 on the back) attached in layers, sturdy plastic
flexible non-woven backings for easy polishing of construction and non-slip grip. Tear layers off to expose new sanding surfaces.
soft materials with flat or contoured surfaces such as
precious metals, aluminum, acrylic, polyurethane, solid Part No. Grit
surface composites, fiberglass, and finished wood. Made
in USA A-SS0120 180
These very fine polishing paper sheets measure 8-1/2" x A-SS0121 240
11" (21.59 x 27.94 cm) and may be used with or without A-SS0122 320
water. For best results work in sequence from the A-SS0123 400
coarsest to the finest grade.
A-SS0124 600
Use on sanding sticks – cut into strips and attach. To make
loops for finger sanders, tape or glue the strips to the right A-SS0125 800
length. A-SS0126 1000
Use with Rotary Tools– Cut into small strips or pieces, A-SS0127 1500
wrap, glue, and mount on Drum Mandrels–page 85 or Split
Mandrels– page 84. Polishing papers can also be used with
Disc Mandrels– page 86 with adhesive backed Velcro® discs. Assortments
A method for this is shown on page 86. Part No. Grit
Price
Comes in 6 micron grades from: 1 (finest) to 30 AKSS0128 Coarse
(coarsest) microns in packs of 10 per grade or a 6-pc $27.72 180, 240, 320, 400
assortment.
AKSS0129 Fine
Micron Price/
$27.72 600, 800, 1000, 1500
Grade Grit / Color Abrasive Part No. 10-Pk
1 10,000 / White Aluminum Oxide 37-941 $26.88 AKSS0130 Complete Assortment
$40.43 1 of each listed
2 6,000 / Aqua Aluminum Oxide 37-942
3 4,000 / Pink Aluminum Oxide 37-943
9 1,200 / Lt. Blue Aluminum Oxide 37-944 37-772 holds sandpaper
15 800 / Gray Silicon Carbide 37-945 1/2" or 5/8" wide
30 400 / Green Silicon Carbide 37-946
6-Pc Assortment (1 each grade) 37-948 $16.02 each
Super Bond Film Tape 1" x 36 Yards 37-959 $34.27 each
Use for making belts for hand sanders
37-752 holds sandpaper
1" wide
A-SS26 Round
8" long Sanding Sticks $15.68 each
1/4" x 5/16" Sanding sticks (10-1/2" long) with molded plastic handles and adjustable metal clamps
come in two widths to hold 1/2", 5/8" or 1" wide x 11" long strips of abrasive paper. Both
are packed with an 11" long, 120 grit cloth back sandpaper strip.
Sandpaper is available in packs of 10 per grit or assortment packs with 2 of each grit.
A-SS27 Square
8" long 3/8" x 3/8" 3M Micron Graded Wet/Dry Polishing Papers cut into strips from 8-1/2" x 11" sheets
work well (for fine polishing on smooth surfaces).
Emery paper cut from 11" sheets or 1" and wider rolls can also be used with the sticks.
Sandpaper Holders $6.27 each
Sandpaper Holders are made of lightweight aluminum with plastic coated handles.
Choose from round or square shape to hold sanding paper, cloth, or other abrasive paper.
3M Micron Graded Wet/Dry Polishing Papers cut into smaller sheets work well (for fine
polishing on smooth surfaces).
1/2" wide Cloth Backed 1" wide Cloth Backed
Sandpaper for 37-772 Sandpaper for 37-752
Ideal for sanding, filing and polishing small or concave workpieces. Hinged at the end, Sanding Stick $6.86/10-pk Sanding Stick $8.12/10-pk
each can hold abrasive sheets that are 1-1/2" x 3-1/2". After opening the hinge, wrap
the sheet around the stick, tuck the ends inside and close the hinge to hold the abrasive 37-786 80 coarse 37-766 80 coarse
surface in place.
37-787 120 medium 37-767 120 medium
37-788 180 fine 37-768 180 fine
37-789 220 extra fine 37-769 220 extra fine
37-785 400 ultra fine 37-765 400 ultra fine
37-782 Assortment $6.86 37-762 Assortment $8.58
2 each of above 2 each of above
80
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Sandpaper Rolls & Assortments
Sandpaper Rolls in Packs of 12 each
From 180 grit all the way up to super fine 5000 grit, mounted on 3/32" (2.35 mm) shanks, these sandpaper rolls of premium quality
sandpaper are excellent for many types of sanding and pre-polishing.
As the abrasive wears, simply peel the paper back and tear it off to expose fresh abrasive. The roll is made up of 1" wide x 10" lengths of high-quality abrasive paper.
Overall length of accessory is 2-1/4" (57 mm).
i
5,000 Max Speed
STARCKE® Matador®
Made in Germany
Grit Part No. 12-Pack Price Grit Part No. 12-Pack Price
81
Sandpaper Roll Assortments
Sandpaper Roll Assortments
3/32" (2.35 mm) shanks hold 1" x 10" long rolls of premium quality
wet/dry sandpaper. Abrasive grit is marked on each roll.
82
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Sanding Bands
83
Screw, Tapered, Split Mandrels & Adapters
Made in USA and Germany Arbor Max A-M22 3/32" 5/32" 3/4" x 1/32" 2-3/8" $2.29
Part Hole Overall Head Price Speed 1/16" at tip
No. Shank Capacity Length Diameter Each RPM
A-M23 3/32" 5/32" 3/4" x 1/32" 2-3/8" $2.29
A-M1 3/32" 1/16" 1-3/4" 3/16" $1.56 40,000
A-M24 3/32" 3/32" 3/4" x 1/64" 1-3/4" $1.56
A-M10 3/32" 1/16" 7/8" 3/16" $2.29 40,000
A-M24LG 3/32" 3/32" 1/2" x 1/64" 2-3/16" $1.56
A-M13 3/32" 1/16" 1-7/8" 5/16" $2.89 30,000
A-M84 1/4" 1/8" 2-1/8" 7/16" $3.00 20,000 A-M16 1/8" 1/8" 2-3/4" $6.09 18,000
For use with cartridge rolls
For use with 1", 2" and 3" A-M89 1/4" 3/8" 2-3/4" $13.21 18,000
A-M30 1/4" 3/8" 1-5/8" 3/4" $4.02 25,000 buffs, see page 96-97.
i Made in USA
3/32" and 1/8" shank Head Head Total Max 3/32" shank 1/8" shank
Diameter Length Length Speed RPM Part No. Price Each Part No. Price Each
1/4" 1/2" 2-1/4" 15,000 A-SD40 $5.24 Not Available in 1/8" shank
3/4" 1/2" 1-7/8" 20,000 Not Available in 3/32" shank A-SD189 $6.68
A-SD661 6 mm
1/2" x 1" $7.45 20,000
i 40,000 RPM Max Speed
Arbor Hole Overall Price
Part No. Capacity Length Each
A-M1L 1/16" 1-3/4" $2.89
A-SD143 1/4" 3/4" x 1/2" $5.76 20,000
A-M7L 1/8" 1-3/4" $2.29
Head
Diameter Overall Price
A-SD144 1/4" Part No. x Length Length Each
3/4" x 1" $5.90 15,000
A-SD662 6mm A-SD324L 1/4" x 1/2" 1-3/4" $10.33
1/16" shank
A-M52 3/32" 1-3/4" friction grip $11.41 20,000
burs 85
Rubber Sanding Disc Mandrels and Screw-Lok Dics
Rubber Sanding Disc Mandrels Screw-Lok & Velcro®- Type Mounting Options
i Made in USA Screw-Lok Mounting Options for adhesive backed or Velcro-backed accessories
Run in Forward Direction ONLY such as those on page 88
Part
No.
Shank Diameter
Overall Price
Length Each
Max
Speed i 10,000 RPM Max Speed
A-M4 1/8" 1/2" 1-1/2" $8.16 15,000 Velcro® Type Hook Disc
Use with 1/2" and 3/4" sanding discs Mandrel for 2" Angle
Grinder (page 32)
A-69222 $7.57
A-M338 1/8" 1-3/4" 2" $17.71 10,000 Has 8mm x 1.0mm thread. Use
with PSA Velcro Loop Discs that
Use with 2" sanding discs come in packs of 5 (A-10041-5).
Front Back
Front Back
Front Back
Screw-Lok Accessories are similar to the 3M Roloc , and are used in industrial, automotive, boating, and crafts. They have plastic Screw-Lok
™
backs that easily attach to the A-69225 Screw-Lok Plastic Disc Mandrel which works with the 2" Angle Grinder Attachment. Screw-Lok backed discs also work on a 1/4"
shank A-M36 Mandrel (on facing page) in a handpiece, bench lathe, or other rotary tool.
Angle Grinder Head
2" Abrasive Pads
With Screw-Lok backs are long lasting, aggressive pads for tough blending and Complete
finishing such as de-burring, oxide and fire scale removal, cleaning, blending and 2" Angle
smoothing. Layered, durable unitized or non-woven construction with Screw-Lok Grinder Kit
backing for secure and easy attachment to A-69225 Screw-Lok Mandrel or 1/4" is shown
shank A-M36 Mandrel for use in handpieces. on page 32
A-3522 A-69225
i
Abrasive Screw-Lok
10,000 RPM Max Speed Pad with Disc Mandrel
Screw-Lok
Back
Part No. Price Thick Color Grit/ Type
2" Aluminum Oxide Sandpaper Discs with
Screw-Lok backs have holes that help prevent clogging. The edges
A-3512 $6.30 9/16" Black Ultra Rough overhang their Screw-Lok plastic backing for smoother contours.
Unitized Available individually and in Assortment Packs from 24 to 600 grit.
Use with A-69225 Screw-Lok Mandrel or 1/4" shank A-M36 Mandrel
for use in handpieces, on facing page.
A-3514 $6.30 19/32" Purple Rough
Unitized i 10,000 RPM Max Speed
$1.32 each
A-3522 $2.76 5/32" Brown 80
Non-Woven Part No. Grit Part No. Grit
A-3601 24 A-3606 240
A-3524 $2.76 5/32" Red 120 A-3602 40 A-3607 320
Non-Woven A-3603 80 A-3608 400
A-3604 120 A-3609 600
A-3526 $2.76 5/32" Green 240
Non-Woven AK3600 $21.02 Assortment, 16-Pc 2 each of grit
AK3610 $13.82 Coarse Assortment, 8-Pc: 2 each of 24, 40, 80 & 120 grit discs
A-3527 $2.76 5/32" Blue 320 AK3620 $13.76 Fine Assortment, 8-Pc: 2 each of 240, 320, 400 & 600 grit discs
Non-Woven
3/8" Arbor Hole Discs for the 2" Angle Grinder i 10,000 RPM Max Speed
3/8" Arbor Hole Coarse Unitized Wheel Knife Edged Felt Wheel
Use with A-69212L Long Hub (shown) on Use with A-69212L Long Hub (shown) on
2" Angle Grinder. Long Hub is NOT included. See page 89. 2" Angle Grinder. Long Hub is NOT included. See page 89.
A-10055 $13.10 1/4" Dark Coarse A-KE6 $6.96 Knife Edge, Hard
Thick Green Unitized
A-69225 Screw-Lok Mandrel with Velcro® Surface: Use A-3705 or A-3702 Discs with
Velcro® Hook Fronts and Screw-Lok backs along with A-10041 Velcro® Loop Discs to abrasive
attach 2" Sanding Discs to A-69225 Screw-Lok Mandrel. disc A-10041 A-69222
PSA Velcro® Velcro®
A-3704 Screw-Lok Discs with Plain Surface: adds screw-lok back without using Loop Disc Hook Disc
Velcro® to attach 2" Sanding Discs to A-69225 Screw-Lok Mandrel. For harder surfaces. Complete 2" Angle
Grinder Kit is shown attaches to Mandrel
on page 30. hook surface Screws onto
Angle Grinder
i
Disc attaches screws onto Mandrel screws onto Angle
10,000 RPM Max Speed to hook Mandrel Grinder
surface
{
{
you need!
A-69212L
Long
sanding A-10041 Hub A-10044
disc PSA Velcro® Foam Head
Loop Disc with Velcro®
attaches to Hook Surface
Hook surface sanding A-69222
disc A-10041 A-10048 Velcro®
i
PSA Velcro® Foam Head Hook Disc
20,000 RPM Max Speed Loop Disc with Velcro® Mandrel
attaches to Surfaces Screws onto
Hook Angle Grinder
Use A-10041 PSA Velcro® Loop Discs to attach sanding surfaces
discs to these Foam Heads. 3/8" arbor holes for mounting
on the Angle Grinder with A-69212L Long Hub.
A-10043 Velcro® Hook on one side and Velcro®
They can also be used with a handpiece with Screw
Loop on other: Attach to A-69222 Velcro®
Mandrels A-M30 and A-M31 page 84 holding the A-10047 Hook Surface Mandrel OR Use A-3705 Disc
handpiece at a 90° angle to the work piece.
with Velcro® Hook (previous page) front
Attach with A-69212L Long Hub on Angle Grinder or use and Screw-Lok back with A-69225 Screw-Lok
a handpiece with Screw Mandrels A-M30 or A-M31. Mandrel on the Angle Grinder.
Part No. Price Each Hardness / Thick Part No. Price Each Hardness / Thick
A-10043 $13.93 Extra Firm - 3/16" A-10047 $5.58 Soft - 1/4"
A-10046 $16.34 Soft - 5/8" A-10048 $5.71 Soft - 1/2"
A-10046
A-10048 89
Angle Grinder Accessories - Assortment Kits, Accessories and Parts
3M 2" Scotch-Brite™ Radial Bristle Discs Angle Grinder Accessories and Parts sold individually
with 3/8" arbor holes for Foredom's Angle Grinder 5mm Short Hub for mounting installed Flap Wheel and other 2" and smaller
accessory wheels and discs: Typhoon® Discs, Radial Bristle Discs, Cut Off and
i 30,000 RPM Max Speed
Made in USA
other Flap Wheels. A-69212 $4.81
Use them on metal, acrylic and ceramics for: cleaning, removing light fire scale and oxide, finishing, 8mm Long Hub for mounting Velcro® Sanding Heads, stacks of 3 to 4 Radial
blending, texturing, pre-polishing and polishing. On wood: they work better than many sanders, Bristle Discs, and other wheels
brushes or wheels. The flexible bristles can sand areas with detail, irregular, A-69212L $4.81
curved, or flat surfaces on soft or hard woods. Inner Wheel Arbor for attaching 3/8" arbor hole accessories
They remove the "fuzzies" left by A-69213 $4.81
carving without harming any
underlying detail. Coarser
grits can carve and
texture,while the finer grits Screw-Lok Disc Mandrel A-69225 $6.01
will smooth, burnish, and
polish. Molded plastic Velcro® Hook Disc Mandrel A-69222 $7.57
discs are embedded with Face Spanner Wrench A-69217 $4.20
3M Cubitron™ and aluminum
oxide mineral. The abrasive filled Open End Wrench A-69218 $4.20
bristles apply a continuous supply of 3mm Hex Key A-69219 $5.20
fresh mineral eliminating the need for
compounds. Varying speeds produce different finishes. Mount 1-2 discs on Short Hub and Drive Cup A-69210 $6.01
3–4 on Long Hub. Radial Bristle Discs can also be used with mandrels in Flexible Shaft
Handpieces or with adapters for use with M.BL Bench Lathe.
$28.59 per 6-Pack
90
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Hammer Handpiece and H.9D Handpiece Accessories
Hammer Handpiece Accessories H.9D PowerGraver Handpiece Accessories
PowerGraver Kit is on page 18.
Gravers for H.9D PowerGraver Handpiece $22.70 each
i A-G91 Graver, GRS #52 Round
2-3/16" long x 1/4" wide x 3/32" at thickest
0-2,500 Strokes per
Minute Max Speed
Made in S. Korea A-G92 Graver, GRS #3 Onglette
2-1/8" long x 1/4" wide x 3/32" at thickest
91
Chisels - H.50 Handpiece and other Reciprocating Power Chisels
Pre-sharpened, quality made steel chisels are excellent for Foredom’s H.50 reciprocating chisel handpiece and other power chisel tools, including Proxxon and
WeCheer. They are recommended for use on wood, soft stone, plastic, and die stone casting investments, but NOT for use on metals.
Page 21 lists kits that include chisels, chisel handpieces and dial speed controls which are recommended for maintaining optimal speeds for chisel carving.
#2 x 14 mm $11.41 55 mm
A-KC512 AKHK570 #11 x 3.5 mm A-KC505 $9.01 55 mm AKHK550
20º Sharpening Angle AK510
Fluteroni
70º, 75º, 110º Parting Tools
8 mm A-KC515
$11.41 55 mm AKHK570
AK510 70º x 5.5 mm A-KC506 $9.01 55 mm AKHK550
25º Sharpening Angle AK510
70º x 8 mm A-KC507 $11.41 55 mm AKHK560
#3 and #7 Sweeps 20º Sharpening Angle K510
#3 x 9 mm A-KC503 $9.01 55 mm AKHK550
AK510
110º x 7 mm A-KC516
$9.01 55 mm AKHK570
20º Sharpening Angle
#3 x 14 mm A-KC501 $11.41 55 mm AKHK560
AK510 110º x 11 mm A-KC513 $11.41 55 mm AKHK570
18º Sharpening Angle
92
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
M.BL Bench Lathe Accessories
Bench Lathe is listed on page 44
2-1/2" diameter Eve Wheels 2" Abrasive Wheels
$22.70 each 1/4" Arbor Holes for use on M.BL
3/8" thick with 1/4" arbor hole. Use Lathe with A-WM-5 and A-WM-6
with Wheel Mandrels on M.BL. Wheel Mandrels.
Silicone for smoothing, grinding
and polishing precious and Use A-10072, A-10074,
non-precious metals. Platinum A-10073 and A-10076
for platinum, stainless steel and on any metal.
chrome-cobalt. Pumice for finishing Use A-10078 for smeary
and polishing metals already set metals like aluminum
with natural and man-made and pewter.
gemstones. A-10075 and A-10077
are for ferrous alloys.
i 8,000 RPM Max Speed
i
11,000 RPM
Max Speed
Part No. Application Grit Part No. Application Grit
A-5541 Universal Coarse A-5546 Platinum Fine Part No. Price Material Color Diameter Thick Grit
A-5542 Universal Medium A-5547 Pumice Medium
A-10072 $6.01 Aluminum Oxide Dark Gray 1-3/4"
3/8" 60
A-5543 Universal Fine A-5548 Pumice Fine
A-10073 $6.01 Aluminum Oxide White 1-7/8"
1/4" 400
A-5545 Platinum Medium
A-10074 $6.01 CeramCut Blue Blue 2" 1/4" 120
A-10075 $6.01 Salt & Pepper Salt & Pepper 2" 1/4" 46
4" diameter Foam Sanding Wheel – choice of 1" wide Sanding Belts
4" x 1" Foam Rubber Wheel has a 1/4" continuous rubber rim over a foam core. Sanding belts A-10078 $8.16 Silicon Carbide Green 2" 1/4" 100
fit on the wheel which is then mounted on the tapered spindle of the M.BL Bench Lathe. Great A-10076 $6.01 V Stone Varied Gray 2" 1/4" 46
for quick shaping and smoothing all metals, composites and wood. Ideal for jewelers, knife A-10077 $6.01 Silicon Carbide Solid Gray 2" 1/4" 100
makers, gunsmiths and woodworkers. Sanding belts are sold separately (see below).
$8.16 each
Double ply wheels with canvas reinforced arbor holes mount onto tapered spindles of the
M.BL Lathe for soft, medium, or coarse finishes on metal. All grades are handy at removing
firescale from sterling silver and copper and can also be used to prepare pieces for polishing.
Wheels give a uniform finish and are good for contoured surfaces. Cotton and Felt Buffs
Part No. Grit Cotton Buff A-CB1 can also be used on a flex shaft handpiece with mandrels A-M78 or
A-5534 Extra Fine A-M89. Felt Buff A-W305 can mount on a handpiece with mandrels A-M8 or A-M85.
See mandrels on page 84. 10,000 RPM Max Speed
A-5535 Fine
A-5536 Medium Part No. Price Material Diameter Thick Hole
A-5537 Coarse A-CB1 $3.85 Cotton, 16 ply 2-1/2" 1/2" Pin
A-W305 $5.29 Felt 2"
3/8" 1/4"
i 8,000 RPM Max Speed
94
Always Wear Eye, Dust and Hand Protection While Using Tools | Foredom.net
Dental - Polishing Accessories For the Bench Lathe
Alcontura Lathe Buffs Gypsiform Lower Jaw Inserts
for Dental Labs $56.50 / per package of 50
Alcontura is a specialized high quality rubber This unique dental lab product is for the production of lower jaw models.
backed cotton. This material produces hardly It saves working time and saves on materials – both plaster and tools. When making a
any lint or debris saving the time and expense lower jaw model take the Gypsiform Insert and press it into the model - with pegs down into
needed to clean or replace filters in dust collection the lower jaw model and fill with plaster to make the model. After curing, you can remove
equipment. Alcontura buffs are used with polishing the Gypsiform Insert which may be reused several times.
compound, produce a high-gloss surface on Made in Germany
plastics and metals and last 3 times longer than
standard buffs.
A-94621 Small 50-pieces A-94622 Large 50-pieces
Made in Germany
i 7,000 RPM Max Speed
3,000 -5,000 RPM Optimum Speeds
A-94623 Assortment – small and large, 25 of each.
A-FM1-6 6-pack / 20 mm x 75 mm
$24.98 13/16" x 3"
A-FM3 each / 51 mm x 51 mm
$26.04 2" x 2"
Foredom’s complete line
Bracelet Buff of Polishing Compounds
are on page 77
95
Cotton and Felt Polishing Buffs Made in USA
97
Product Repairs Warranty Policies
Authorized repair service is available at the Foredom factory in Bethel, CT. 2-Year Limited Warranty
Please call 203-792-8622 or email customerservice@blackstoneind.com to All Flexible Shaft Motor and Speed Control Combinations in this Catalog including:
request a RMA number (Return Material Authorization Number) prior to Series SR, SRH and SR CE Motor
returning. Repairs will not be accepted without an RMA number. Enclose the Brush Type and Brushless Micromotor Kits
and Speed Control Combinations,
item(s), a packing list, your address, phone number, email address and a Sets and Kits Series: Bench Lathe and Bench Lathe Kits
description of the problem or repairs required and a RMA number from customer TX and TXH Motor and Speed Control Filter Hood
service. Estimates of repair cost will be made upon request. If the cost (labor plus Combinations, Sets and Kits Dust Collector
parts) is more than fifty percent of the price for a new replacement we will contact Series LX and LXH Motor and Speed Work Chambers and Fishmouth
you and recommend a trade-in offer. Control Combinations, Sets and Kits
Please retain your proof of purchase for warranty repairs. Rotary Tumbler
FOREDOM
16 Stony Hill Road, Bethel, CT 06801
® Foredom Electric Company
choice of handpiece. For example: M.SR-FCT + H.30®. We’ll ship an M.SR Hang-Up
style motor (shaft and sheath are included) with an C.FCT-1 foot operated variable speed
control and a H.30® handpiece. Add the price of the motor–control to the price of the
Email: customerservice@blackstoneind.com handpiece to calculate the total price.
Phone: 203-792-8622 / 800-272-2885 Prices Effective 7/1/2022 and
Live Chat: Available at foredom.net
Monday – Friday, 8:30 am – 4:45 pm (ET) Subject to Change Without Notice
Every effort is made to present our products accurately in this catalog. This edition introduces several new items. We are not responsible for typographical errors. Changes, improvements, additions and dele-
tions may take place after this catalog is printed– for the most up to date information, including specifications and pricing, please visit our website.
Leading brands offering access to complete solutions. Quality brands providing precision tools and serving artisans worldwide.
FOREDOM®
foredom.net zonatool.net olsonsaw.net handlermfg.com edgefinisher.com
Foredom is the leading manufacturer of flexible shaft rotary power tools in the world. From flex shaft machines, to specialized motors,
handpieces and bench top attachments and accessories, Foredom tools set the standard in quality, power and performance.
Foredom tools are used in jewelry manufacturing, industrial and machine shop operations, woodcarving and wood working, dental, optical and scientific labora-
tories, art studios, home/shop hobby applications, nail salons and wherever precision and reliability are valued.
Foredom flexible shaft power tools are used for many different applications such as hand grinding, deburring, carving, sanding, cleaning, buffing and polishing
on all types of materials –wood, metal, plastic, glass and stone.
Photo Credits: Special thanks to the following individuals and businesses for the photos throughout this and owner of Wolf Tools, milling wax on our Drill Press. Carpenter and woodcarver, Ted Knapp, is hollowing out
catalog: C. Wheeler, of Danbury, CT, at the Mobile Work Station using a flex shaft handpiece for grinding a duck decoy using the Angle Grinder. David Clayton of Gems & Jade is polishing California jade with the Angle
inside the Lighted Work Chamber. Lessley Burke, goldsmith, enamelist, owner of The Guilded Lynx, using Grinder. Donald Nadeau of Manchester Molding & Manufacturing is using the K.1020 Chuck Style Micromotor.
the Fishmouth and Dust Collector to collect particles from grinding a small silver workpiece. Pete Cortez, of Mike Milici wearing the apron and Mike Dickey, master jeweler, using the wax carver and changing out a
Quality Gem, cutting the seat in a prong with our K.1050 Brushless Micromotor. Frank Stetson using our Chisel brass tip at his bench. Mark Mann, Master Jeweler & GIA Dir. of Global Jewelry Mfg. Arts, using accessories on
Handpiece on relief carvings. Jeweler from Jewelry Designs, Danbury, CT polishing a gold bangle bracelet. the BL Bench Lathe to polish a gold ring. Karl Wagner, of Wagner Dental Lab, Inc. using our BL lathe with Filter
Lessley Burke using various tools including the Duplex Adapter to drill pearls in the Lighted Work Chamber, the Hood and grinding stone in the Lighted Work Chamber to grind down chrome cobalt on a dental bridge, and
K.1030 Battery Operated Micromotor at an outside event with Patty Segar, adding detail to a silver pin with the finally Piro Zisi holding an H.30 handpiece. Quality Gem in Bethel, CT with the K.1040
K.1070 Rotary Micromotor, sifting enamel in the Jumbo Work Chamber. Kate Wolf, metalsmith, jeweler, teacher * H.30® is a registered trademark of Blackstone Industries LLC.