Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Contents

BRIGHTER C
5
00
40
00
: 00
SN

Brighter C User Manual x1 Micro USB to L shape Allen key Converter,


Type A cable for charging x1 for converter x1 M14(-) to M11+ x1

English Features
User Manual • Brighter C is compact and lightweight tracer, suitable for water BB and tracer BB

• Patented design without switch, power on by shaking, enter sleep mode while not in use.
中文版
日本語 5
40
00 • Can be used as tracer module, and put into silencer.
00
: 00
SN

Instruc�ons
www.acetk.com
User Manual
Charging the ba�ery
• Rotate the lid counter clock wise to remove, use Mico USB
cable to recharge. (Figure 1)

Safety and Precau�ons


• Charge at least 3 hours for the first �me to ensure best USB power
To avoid the risk of high voltage circuit electrical shock, do not disassemble Brighter C. performance of the ba�ery.

Do not look into the gun barrel to avoid accidental discharge of BB. • Indicator breaths during charging, and goes off when Charging
charging is completed. (Figure 1) cable

Charge the ba�ery at least every 2 months when the tracer is not used to avoid
2
M
completely discharging the ba�ery. Defect of completely discharging the ba�ery is not
covered by warranty. • Breathing light reflects progress of charging:
Red: 0% ~ 30%
With the lid �ghten, Brighter C is with IP64 ra�ng, dust and splash proof, suitable for
IP64 outdoor use. Orange: 30% ~ 60%

Green: 80% ~ 99%

Suitable for green tracer BBs,


• Remove the charging cable and lock the lid back by rota�ng
NOT for red tracer BBs. clockwise, Brighter C turns on automa�cally. (Figure 2)

• When ba�ery is low, the LED flashes red, and Brighter


* All the specifica�ons and contents in this manual are subject to change without no�ce. (Figure 2)
* All the specifica�ons and contents are only for reference, please make the object as the standard. turns off; please recharge Brighter as soon as possible
to avoid completely discharging the ba�ery.
Power On and Off Indica�on Chart
• Power On: Shake the Brighter, a short Beep will indicate the power is on. LED and Beeps Symbol Status
(Figure 1)
1 second beep, green light 1 sec Power On
• Sleep mode: Brighter enters sleep mode automa�cally when idle for over (Figure 1) 2 sec
3 short beeps every2 second Barrel covered the sensor
5 minutes, and return to standby mode when there is vibra�on. (Figure 2)
3 short beeps 5 consecu�ve �mes ( )x5 Power off complete
• Power off: Insert a pen or s�ck with diameter around 10mm into 5Min

Brighter for 2 seconds, wait for 3 short beeps for 5 consecu�ve �mes Red light flash, 5 short beeps Ba�ery too low, force shutdown
to complete the shutdown. (Figure 3) Red breathing light Ba�ery 0%~30% charged
(Figure 2)
Orange breathing light Ba�ery 30%~60% charged
• Low ba�ery force power off: the LED flashes red, and 5 short beeps to Green breathing light Ba�ery 80%~99% charged
indicate the ba�ery level is too low and shutdown.
LED turn off a�er Green breathing light Charging complete
(Figure 3)
3 short beeps 3 short beeps
A�er self-test, green light, 1 second beep 1sec Self-test success
Installa�on
A�er self-test, red light, 3 short beeps Self-test fail
• Please make sure the barrel length a�er the screw thread is less than 10mm

10mm, or the barrel will cover the sensor of Brighter and cause
malfunc�on. (Figure 1)
• When the sensor is covered by barrel for over 2 seconds, there will be Specifica�on
(Figure 1)
warning of 3 Beeps every 2 seconds, please check the installa�on.
• Dimension: Length 57mm, Diameter 28mm.

• When installing on pistol with M11+ screw thread, please use the • Weight: 32g (without converter)
converter, and �ghten with the Allen key. (Figure 2) • Burst Speed: Up to 35PRS
(Figure 2)
• Cer�ficates: FCC CE ROHS
• Please make sure Brighter and the silencer are coaxial when using it BB

as module, miss alignment might damage Brighter. (Figure 3) • Ba�ery: Li-Ion, charging �me 2.5 hours, last for 20,000 shots.
(Figure 3) • BBs: Supports green tracer BBs and water BBs, not support red tracer BBs.
• Make sure the installa�on direc�on of Brighter is correct inside the
silencer, to ensure Brighter works properly. (Figure 4)

Warranty
• Standard One year manufacturer warranty.
(Figure 1) X
• Warranty does not include damage from incorrect usage, external force, or liquid intruding
Self-Test Mode inside the product.
• Insert a pen or s�ck with diameter around 10mm into Brighter for 2 seconds, wait for 3 short • Warranty does not include ba�ery damaged by complete discharging, please recharge at least
beeps, take out the pen or s�ck, Brighter enters self-test mode, and indicates the result by LED every 2 months when not in use.
and Beeps.
• Normal: LED indicates green, with 1 second Beep. 1 sec

UM050001
• Fail: LED indicates red, with 3 short Beep.
R0136

You might also like