Professional Documents
Culture Documents
Exercise 23
Exercise 23
Test Systems
Exercise 23
1. Start Revit 2019
5. All warnings are negligible except of the hot water at end of the Ladies room
6. Go to 3D Plumbing view. Locate the pipe, take it out from the T fitting, and
return it back using object snap. The warning should disappear
7. For any other open end, right-click the open end, and select Cap Open End.
You will see that the warning will disappear.
9. You will find the two water closet in the Ladies room has two warnings, which
means there is a problem with the connection with the cold water system
10. Go to 3D Plumbing, delete all pipes and fittings connecting the two water closet
to the cold water pipe, and use Connect Into button to rightly connect them
11. Start Show Disconnects command, and deselect the Pipe option and click OK
13. Select the one of the sinks in the Ladies room. From context tab, click System
Inspector button. Select Domestic Hot Water. Click Inspect button. What is the
Flow value in the sink and in the pipe? _____________, _______________
16. Duplicate with Detailing the view and call it 00 Ground – Plumbing - Sizes
17. From Properties, locate System Color Scheme, and click Edit
8-35
Revit MEP 2019 Essentials
19. From the left click Pipe Color Fill - Size, click OK twice to end the command
20. Start Pipe Legend command, and insert the legend to the left of the plan
8-36