Professional Documents
Culture Documents
Assignment 7 2024
Assignment 7 2024
Assignment 7 2024
QUESTION 1:
What is the reference power for air while calculating the sound power level (SWL) in dB?
a. 1mW
b. 1𝜇W
c. 1nW
d. 1pW
Correct Answer: d
____________________________________________________________________________
QUESTION 2:
For an ideal one‐third octave filter, ratio of upper cutoff frequency to lower cutoff frequency is
a. 21/3
b. 22/3
c. 1/3
d. 23
Correct Answer: a
Detailed Solution: The lower and upper frequencies for 1/3rd‐octave band are given by
1 1
f center / 2 6 and f center 2 6 , respectively.
____________________________________________________________________________
QUESTION 3:
If a pass band filter has a lower frequency of 𝑓 and upper frequency of 𝑓 , what is the expression
for center frequency?
a. 𝑓 𝑓
NPTEL Online Certification Courses
Indian Institute of Technology Kharagpur
b. 𝑓 𝑓 )/2
c. 𝑓𝑓
d. 𝑓 𝑓
Correct Answer: c
____________________________________________________________________________
QUESTION 4:
If a pass band filter has a lower frequency of 𝑓 and upper frequency of 𝑓 , what is the
expression for bandwidth of the filter?
a. 𝑓 𝑓
b. 𝑓 𝑓 )/2
c. 𝑓𝑓
d. 𝑓 𝑓
Correct Answer: a
QUESTION 5:
Calculate the sum of two sound pressure levels 30 dB and 30 dB
a. 60 dB
b. 33 dB
c. 40 dB
d. 66 dB
Correct Answer: b
n SPL i
Detailed Solution: Total sound pressure level is given by SPL T 10 log
i=1
10 10
____________________________________________________________________________
QUESTION 6:
Anechoic chambers are used to reproduce which type of condition
a. reverberant field
NPTEL Online Certification Courses
Indian Institute of Technology Kharagpur
b. free field
c. near field
d. none of the above
Correct Answer: b
____________________________________________________________________________
QUESTION 7:
a. audible
b. ultrasonic
c. infrasonic
d. none of the above
Correct Answer: b
____________________________________________________________________________
QUESTION 8:
What is the reference intensity while calculating the sound intensity level (SIL) in dB?
a. 10‐10 W/m2
b. 20×10‐6 W/m2
c. 1 W/m2
d. 10‐12 W/m2
Correct Answer: d
____________________________________________________________________________
QUESTION 9:
Select the transducer which is a non-contact type
c) Strain gauge
d) Eddy current proximity probe
Correct Answer: d
____________________________________________________________________________
QUESTION 10:
In the free-field region it is assumed that for a point spherical source, the sound pressure level
reduces by __ dB for every doubling of the distance from the source.
a. 2
b. 3
c. 6
d. 12
Correct Answer: c
************END************