Professional Documents
Culture Documents
Bently Nevada 3300 XL Proximity Transducer System Datasheet
Bently Nevada 3300 XL Proximity Transducer System Datasheet
System
Datasheet
Bently Nevada Machinery Condition Monitoring 141194 Rev. AL
Description
The 3300 XL 8 mm Proximity Transducer System consists of:
o One 3300 XL 8 mm probe,
o One 3300 XL extension cable1, and
o One 3300 XL Proximitor Sensor2.
2/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
4. 3300 XL 8 mm components are both
electrically and physically interchangeable
with non-XL 3300 5 mm and 8 mm
components. Although the packaging of the
3300 XL Proximitor Sensor differs from its
predecessor, its design fits in the same 4-hole
mounting pattern when used with the 4-hole
mounting base, and will fit within the same
mounting space specifications (when
minimum permissible cable bend radius is
observed).
5. Mixing XL and non-XL 3300-series 5 mm and
8 mm system components limits system
performance to the specifications for the non-
XL 3300 5 mm and 8 mm Transducer System.
6. The 3300-series 5 mm probe (refer to
Document 141605) uses smaller physical
packaging, but does not reduce the side view
clearances or tip-to-tip spacing requirements
as compared to an 8mm probe. It is used when
physical (not electrical) constraints preclude
the use of an 8 mm probe. When your
application requires narrow side view probes,
use the 3300 NSv Proximity Transducer System
(refer to Document 147385).
7. 8 mm probes provide a thicker encapsulation
of the probe coil in the molded PPS plastic
probe tip. This results in a more rugged probe.
The larger diameter of the probe body also
provides a stronger, more robust case. We
recommend that you use 8 mm probes when
possible to provide optimal robustness against
physical abuse.
8. Each 3300 XL extension cable includes
silicone tape that you can use instead of
connector protectors. We do not recommend
silicone tape for applications that will expose
the probe-to-extension cable connection to
turbine oil.
3/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Unless otherwise noted, the following Resistance (RPROBE) from Center Conductor
specifications are for a 3300 XL 8 mm to Outer Conductor
Proximitor Sensor, extension cable and 8 mm
probe between +18˚C and +27˚C (+64˚F to Probe
RPROBE(Ω)
+80˚F) at a maximum altitude of 2000 meters, Length (m)
with a -24 Vdc power supply, a 10 kΩ load, an
0.5 7.45 ± 0.50
AISI 4140 steel target, and a probe gapped at
1.27 mm (50 mils). Performance characteristics 1.0 7.59 ± 0.50
apply to systems that consist solely of 3300 XL 8
mm components. The system accuracy and 1.5 7.73 ± 0.50
interchangeability specifications do not apply
to transducer systems that are calibrated to 2.0 7.88 ± 0.50
any target other than our AISI 4140 steel target.
3.0 8.17 ± 0.50
Electrical 5.0 8.73 ± 0.50
Accepts one non-contacting 9.0 9.87 ± 0.50
Proximitor 3300-series 5 mm, 3300 XL 8
Sensor Input mm Proximity Probe and
Extension Cable.
Nominal Extension Cable DC Resistance
Requires -17.5 Vdc to -26 Vdc
when installed with non- Resistance (RCORE) from Center Conductor
incendive circuit connected to Center Conductor
per installation drawing 140979
at 12 mA maximum Length of
Power
consumption, -23 Vdc to -26 Extension RCORE (Ω)
Vdc with barriers. Operation at Cable (m)
a more positive voltage than
-23.5 Vdc can result in reduced 3.0 0.66 ± 0.10
linear range.
3.5 0.77 ± 0.12
Less than 2 mV change in
Supply 4.0 0.88 ± 0.13
output voltage per volt change
Sensitivity
in input voltage. 4.5 0.99 ± 0.15
Output 6.0 1.32 ± 0.21
50 Ω
Resistance
7.0 1.54 ± 0.23
4/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
5/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
6/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
5 or 1-
9 meter
meter Ext.
Gap Proximito Probe Probe Case Torque
Proximito Cable
r Sensor
r Sensor Maximum
Probe Type Recommended
Rated
10 0.0119 0.0247 0.0004 0.0004
Standard
50 0.0131 0.0323 0.0014 0.0014
forward 33.9 N•m 11.2 N•m (100
90 0.0133 0.0348 0.0045 0.0045 mounted (300 in•lbf) in•lbf)
probes
Standard
forward-
Mechanical 22.6 N•m 7.5 N•m (66
mount probes
(200 in•lbf) in•lbf)
- first three
Probe Tip
Polyphenylene sulfide (PPS). threads
Material
Reverse- 22.6 N•m 7.5 N•m (66
Probe Case AISI 303 or 304 stainless steel
mount probes (200 in•lbf) in•lbf)
Material (SST).
Extension Cable Material
Probe Cable Specifications
Standard 75 Q triaxial, fluoroethylene
75Ω triaxial, fluoroethylene
cable propylene (FEP) insulated
propylene (FEP) insulated
Standard
probe cable in the following Extended
cable 75Ω triaxial, perfluoroalkoxy
total probe lengths: 0.5, 1, 1.5, 2, Temperature
3, 5, or 9 meters. (PFA) insulated.
Range cable
75Ω triaxial, perfluoroalkoxy Minimum
Extended (PFA) insulated probe cable in Cable Bend 25.4 mm (1.0 in)
Temperature the following total probe Radius
Range cable lengths: 0.5, 1, 1.5, 2, 5, or 9
meters. 3300 XL 8 mm components are both
Armor electrically and physically
Flexible AISI 302 or 304 SST interchangeable with non-XL 3300 5
(optional on
with FEP outer jacket. mm and 8 mm components when
both)
minimum permissible cable bend
330 N (75 lbf) probe case to radius is observed.
Tensile
Strength probe lead.
(Maximum 270 N (60 lbf) at probe lead to Connector Gold-plated brass or gold-
Rated) extension cable connectors. Material plated beryllium copper.
Maximum
Connector 0.565 N•m (5 in•lbf)
Torque
7/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Connector Probe
Tightening Instructions Maximum Length of Thread
Type Case
Engagement
Thread
Two 3300 XL
gold "click" 3/8-24 0.563 in
Finger tight
type
M10x1 15 mm
connectors
Weight
Total System
Weight 0.7 kg (1.5 lb m)
(TypicaI)
Extension
34 g/m (0.4 oz/ft)
Cable
Armored
Extension 103 g/m (1.5 oz/ft)
Cable
Proximitor
246 g (8.67 oz)
Sensor
8/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
9/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
EMC
European Community Directive:
EMC Directive 2014/30/EU
Standards
EN 61000-6-2; Immunity for
Industrial Environments
EN 61000-6-4; Emissions for
Industrial Environments
RoHS
European Community Directive:
RoHS Directive 2011/65/EU
Maritime
2019 Rules for Conditions of Classification,
Part 1, 1-1-1/7.7, 1-1-A3, 1-1-A4
2019 Rules for Conditions of Classification,
Part 1, Offshore Units and Structures
1-1-4/9.7, 1-1-A2, 1-1-A3
Functional Safety
SIL 2, HFT = 0
SIL 3, HFT = 1
10/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
cNRTLus ia
II 1 G
Ex ia IIC T4/T5 Ga
3300 XL Proximitor Sensor Ex ia IIIC T90C/T105C Dc
For EPL Dc:
T105C @ Ta = -55°C to 100°C
ia Class I, Zone 0: AEx/Ex ia IIC T4/T5 Ga; T90C @ Ta = -55°C to +85°C
Class I, Groups A, B, C, and D,
When installed Class II, Groups E, F and G, Ui= -28V Uo= -28V
with Class III;
intrinsically Ii= 140mA Io= 140mA
safe zener T5 @ Ta= -55°C to + 40°C.
barriers per T4 @ Ta= -55°C to + 80°C. Pi= 0.91W Po= 0.742W
drawing 141092
or when Ci- 47nF Co= 1.5nF
installed with
galvanic Li= 1460µH Lo= 610µH
isolators.
nA,ec
nA, ec Class I, Zone 2: AEx/Ex nA IIC T4/T5 Gc;
Class I, Division 2, Groups A, B, C, and II 3 G
When installed D; Ex nA IIC T4/T5 Gc
with non- Class I, Zone 2: AEx/Ex ec llC T4/T5 Gc; Ex ec llC T4/T5 Gc
incendive Class I, Division 2, Groups A, B, C, and
circuit D; Ui= -28V li= 140 mA
connected per
drawing T5 @ Ta= -55°C to + 40°C T5 @ Ta= -55˚ C to + 40˚C
140979. T4 @ Ta= -55°C to + 80°C T4 @ Ta= -55 ˚C to + 80˚C
ia Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga; Probe entity parameters are met
Class 1, Groups A, B. C, and D, when used with BN extension cables
When installed Class II, Groups E, F, and G, and connected to BN Prox.
with Class III;
intrinsically
safe zener (see Temperature Schedule table to
barriers per follow)
drawing 141092
or when
installed with
galvanic
isolators.
11/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
T1 -55°C to +232°C
T2 -55°C to +177°C
T3 -55°C to +120°C
T4 -55°C to +80°C
T5 -55°C to +40°C
For EPL Dc
12/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
For the detailed listing of country and 30 3.0 meters (9.8 feet)
product-specific approvals, refer to
50 5.0 meters (16.4 feet)
the Approvals Quick Reference Guide
(108M1756). 90 9.0 meters (29.5 feet)
13/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
00 Not required
Unthreaded length must be at least
20 mm less than the case length. 05 CSA, ATEX, IECEx Approvals
14/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
15/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Part Number-AA-BB-CC
16/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
A: Thread size
C: Agency Approval Option
01 3/8-24
00 Not required
04 M10 x 1
05 CSA, ATEX, IECEx Approvals
Bently Nevada recommends the phenolic
Aluminum probe clamp bracket1 threaded mounting bracket if your application
requires additional electric isolation from the
137491-AA mounting location (as in some generator and
electrical motor bearing locations). The -01
A: Mounting screw option option includes two 10-24 UNC-2A mounting
screws. The -04 option includes two M5 x 0.8-
01 10-24 UNC-2A mounting screws 6g mounting screws. The mounting screws
02 M5 x 0.8-6g mounting screws have pre-drilled holes for safety wire.
Probe Ordering Information Notes:
The aluminum clamp bracket is an unthreaded
mounting bracket designed for use with the 1. Mounting clamps must be ordered
smooth case probes (330140, 330141, 330197 separately for 330140, 330141, 330197, and
and 330198). After gapping the probe, tighten 330198.
the clamp bracket by tightening the screws.
2. For a shorter delivery time, order
The mounting screws have pre-drilled holes for
commonly stocked probes. The following
safety wire.
part numbers are currently stocked
probes:
17/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
330101-00-08-05-02-00, 330101-00-08-05-02- 9.0 meters (29.5 feet) system length,
05, 330101-00-08-10-02-00, 330101-00-08-10- 92
no mounting hardware
02-05, 330101-00-12-10-02-00, 330101-00-12-10-
02-05, 330101-00-16-10-02-00, 330101-00-16- B: Agency Approval Option
10-02-05, 330101-00-20-05-02-00, 330101-00-
20-10-02-00, 330101-00-20-10-02-05, 330101- 00 Not required
00-30-10-02-00, 330101-00-30-10-02-05,
330101-00-40-05-02-00, 330101-00-40-10-02- 05 CSA, ATEX, IECEx Approvals
00, 330101-00-40-10-02-05, 330101-00-60-10-
02-00, 330101-00-60-10-02-05, 330102-00-20-
10-02-00, 330103-00-02-10-02-05, 330103-00-
04-10-02-00, 330103-00-05-10-02-00, 330104-
Ordering Information for Extension
00-06-10-02-00, 330104-01-05-50-02-00, Cables
330105-02-12-05-02-00, 330105-02-12-05-02-
05, 330105-02-12-10-02-00, 330105-02-12-10- 3300 XL Standard Extension Cable
02-05, 330106-05-30-05-02-00, 330106-05-
30-05-02-05, 330106-05-30-10-02-00, 330106- 330130-AAA-BB-CC
05-30-10-02-05.
Ordering Information for Proximitor Make sure that the extension cable
length and the probe length, when
Sensor
added together, equal the
Proximitor Sensor total length.
3300 XL Proximitor Sensor
5.0 meters (16.4 feet) system length, 075 7.5 meters (24.6 feet)
50
panel mount
080 8.0 meters (26.2 feet)
5.0 meters (16.4 feet) system length,
51 085 8.5 meters (27.9 feet)
DIN mount
5.0 meters (16.4 feet) system length, B: Connector Protector and Cable Option
52
no mounting hardware
00 Standard cable
9.0 meters (29.5 feet) system length,
90 01 Armored cable
panel mount
Standard cable with connector
9.0 meters (29.5 feet) system length, 02
91 protector
DIN mount
18/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
19/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
20/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
21/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
22/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
23/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
24/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
25/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
26/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
27/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
28/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Figure 8: Typical 3300 XL Extended Temperature Range Probe and 4 m Extended Temperature
Range Extension Cable at Th (Proximitor Sensor and Probe Tip with 1-foot Cable are at +25°C)
29/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Figure 9: Typical 3300 XL Extended Temperature Range Probe and 8 m Extended Temperature
Range Extension Cable at Th (Proximitor Sensor and Probe Tip with 1-foot Cable are at +25°C)
30/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Figure 10: Frequency Response, Typical 3300 XL 8 mm 5 m or 1 m System with Varying Lengths of
Field Wiring Attached, No Barriers
31/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Figure 11: Phase Response, Typical 3300 XL 8 mm 5 m or 1 m System with Varying Lengths of Field
Wiring Attached, No Barriers
32/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Figure 12: Frequency Response, Typical 3300 XL 8 mm 9 m System with Varying Lengths of Field
Wiring Attached, No Barriers
33/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Figure 13: Phase Response, Typical 3300 XL 8 mm 9 m System with Varying Lengths of Field
Wiring Attached, No Barriers
34/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
35/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
36/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
37/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
38/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
39/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
40/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
41/42
3300 XL 8 mm Proximity Transducer System
Datasheet 141194 Rev. AL
Bently Nevada, Keyphasor, M2, Proximitor and Orbit Logo are registered trademarks of Bently Nevada, a Baker Hughes
business, in the United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes Company.
All other product and company names are trademarks of their respective holders. Use of the trademarks does not
imply any affiliation with or endorsement by the respective holders.
Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes does not
make any representation as to the accuracy or completeness of the information and makes no warranties of any
kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness
for a particular purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect,
consequential or special damages, claims for lost profits, or third party claims arising from the use of the
information, whether a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make
changes in specifications and features shown herein, or discontinue the product described at any time without
notice or obligation. Contact your Baker Hughes representative for the most current information.
The information contained in this document is the property of Baker Hughes and its affiliates; and is subject to
change without prior notice. It is being supplied as a service to our customers and may not be altered or its content
repackaged without the express written consent of Baker Hughes. This product or associated products may be
covered by one or more patents. See Bently.com/legal.
42/42