Professional Documents
Culture Documents
ISMC Weight and Dimension Chart - Grow Mechanical
ISMC Weight and Dimension Chart - Grow Mechanical
PLANTS EQUIPMENTS PLANT MAINTENANCE PIPINGS STANDARD & CODE Type & Hit Enter...
API STANDARDS
ASME CODE
ASTM STANDARDS
CORROSIONPEDIA
Differences between
EQUIPMENT
EQUIPMENT PARTS
INTERVIEW QUESTION
MECHANICAL TERMONOLOGY
OLETS
PIPELINE FLANGE
PIPING ACCESSORIESA
PIPINGS
PROJECT MANAGEMENT
ROTATING EQUIPMENT
STATIC EQUIPMENT
TROUBLESHOOTINGS
Uncategorized
ISMC Weight and Dimension Chart VALVE
Before we dive into the weight and dimension chart, let’s briefly understand what ISMC channels are. ISMC channels are hot-rolled steel channels
commonly used in structural applications. They have a distinctive “C” shape and are characterized by their dimensions and weight. These channels are
designed to provide structural strength and support for a wide range of applications, including building frames, bridges, and industrial structures.
Full Form: The full form of ISMC is Indian Standard Medium Weight Channel.
The ISMC weight and dimension chart provides valuable information about the various sizes and weights available for ISMC channels. The chart
typically includes the following parameters:
1. Sectional Weight: This refers to the weight of the ISMC channel per unit length. It is measured in kilograms per meter (kg/m) or pounds per
foot (lbs/ft).
2. Depth: The depth of an ISMC channel is the vertical distance between the top and bottom flanges. It is measured in millimeters (mm) or inches
(in).
3. Width: The width of an ISMC channel is the horizontal distance between the outer edges of the flanges. It is also measured in millimeters (mm)
or inches (in).
4. Web Thickness: The web thickness is the thickness of the vertical center section (web) of the ISMC channel. It is measured in millimeters (mm)
or inches (in).
5. Flange Thickness: The flange thickness is the thickness of the horizontal top and bottom sections (flanges) of the ISMC channel. It is measured
in millimeters (mm) or inches (in).
The ISMC weight and dimension chart is a valuable resource for engineers, architects, and construction professionals. Here’s why it is essential:
1. Structural Design: The chart allows structural designers to select the appropriate ISMC channel based on the required load-bearing capacity and
dimensions of the structure. It helps ensure the safety and stability of the project.
2. Material Calculation: The sectional weight information provided in the chart enables accurate material calculations for estimating the overall
weight of the structure. This is crucial for transportation, handling, and cost estimation purposes.
3. Standardization: The ISMC weight and dimension chart follows the Indian Standard (IS) specifications, ensuring uniformity and
standardization in the construction industry. It provides a reference for choosing the right channel based on project requirements.
4. Compatibility: By referring to the chart, engineers can identify compatible ISMC channels for connecting different structural elements. This
ensures that the channels can be joined seamlessly and efficiently.
How to Use the ISMC Weight and Dimension Chart
To use the ISMC weight and dimension chart effectively, follow these steps:
The weight of an ISMC channel can be calculated using the following formula:
Weight (kg/m) = (A – B) * C * D
Where: A = Width of the flange (mm) B = Thickness of the flange (mm) C = Width of the web (mm) D = Thickness of the web (mm)
Let’s take an example to demonstrate the calculation:
Example:
Consider an ISMC channel of size ISMC 200 with the following dimensions: Width of the flange (A) = 75 mm Thickness of the flange (B) = 9.0 mm
Width of the web (C) = 200 mm Thickness of the web (D) = 6.2 mm
Using the formula, we can calculate the weight of the ISMC channel:
Weight (kg/m) = (A – B) * C * D Weight (kg/m) = (75 – 9.0) * 200 * 6.2 Weight (kg/m) = 66 * 200 * 6.2 Weight (kg/m) = 81840 kg/m
Therefore, the weight of an ISMC 200 channel with the given dimensions is 81840 kg/m.
It’s important to note that the above calculation gives the weight per meter of the ISMC channel. If you need to calculate the total weight for a specific
length, you can multiply the weight per meter by the length in meters.
Below is a list of common ISMC channel sizes along with their respective weights per meter (kg/m):
1. ISMC 75 – Weight: 5.67 kg/m
2. ISMC 100 – Weight: 8.90 kg/m
3. ISMC 125 – Weight: 11.70 kg/m
4. ISMC 150 – Weight: 14.90 kg/m
5. ISMC 200 – Weight: 22.40 kg/m
6. ISMC 250 – Weight: 34.60 kg/m
7. ISMC 300 – Weight: 42.20 kg/m
8. ISMC 400 – Weight: 65.40 kg/m
9. ISMC 450 – Weight: 77.60 kg/m
10. ISMC 500 – Weight: 92.40 kg/m
The ISMC (Indian Standard Medium Weight Channel) follows the standards and codes set by the Bureau of Indian Standards (BIS). The relevant code
for ISMC channels is IS 808:1989, which specifies the dimensions, weight, and technical requirements for structural steel sections, including ISMC
channels.
IS 808:1989 – Indian Standard for Rolled Steel Channels (ISMC)
This standard provides guidelines for the manufacturing and usage of rolled steel channels, including ISMC channels. It covers various dimensions,
weight, tolerances, and mechanical properties of ISMC channels. The code ensures uniformity, quality, and safety in the construction industry in India.
Some key aspects covered in IS 808:1989 for ISMC channels include:
1. Dimensional Specifications: The standard specifies the depth, width, web thickness, and flange thickness of ISMC channels. It provides a range
of sizes to suit different structural requirements.
2. Weight Specifications: IS 808:1989 provides the weight per meter for each size of ISMC channel. These weight specifications are crucial for
load calculations, material estimation, and transportation considerations.
3. Tolerance Requirements: The code defines the permissible variations in dimensions and weight for ISMC channels. It ensures that the
manufactured channels meet the required specifications and maintain dimensional accuracy.
4. Mechanical Properties: IS 808:1989 specifies the mechanical properties, including yield strength, tensile strength, and elongation, for ISMC
channels. These properties determine the structural strength and performance of the channels.
5. Designation: The standard provides a specific designation system for ISMC channels, ensuring clear identification and communication of the
channel size and properties.
6. Testing and Quality Control: IS 808:1989 outlines the testing procedures and quality control measures to ensure that the manufactured ISMC
channels meet the required standards and specifications.
Compliance with IS 808:1989 is essential for manufacturers, suppliers, engineers, and architects involved in the design and construction of structures
that incorporate ISMC channels. It ensures that the channels used in construction projects meet the necessary quality and safety standards.
Related Posts
Types of compressor
Introduction of compressor A compressor is a mechanical device that
is designed to increase the pressure of a gas by reducing its volume.
It is used in a wide range of industries, including…
Grow Mechanical