Professional Documents
Culture Documents
Time Response Analysis - DPP 01 (Of Lec 01 & 02)
Time Response Analysis - DPP 01 (Of Lec 01 & 02)
MCQ EASY
MCQ EASY
3
3. In a feedback control system, if G ( s ) = 7. The open loop transfer function of a unity feedback
s ( s + 1) K
system is G ( s ) = 3 . The type and order
1
and H ( s ) = , Then the closed – loop system will S (1 + sT )
s
of the system are
be of type
(a) 2 and 3 (b) 3 and 2
(a) 3 (b) 2
(c) 3 and 3 (d) 3 and 4
(c) 1 (d) 0
MCQ EASY
MCQ EASY
4. A closed loop system having negative unity
K ( s + 2)
8. The unit impulse response of a system is
feedback with G ( s ) H (s ) =
( )
, then the h(t) = e–t, t ≥ 0. For this system, the steady state
s s2 + 2s + 3
value of the output for unit step input is equal to
type and order of the control system is
(a) –1 (b) 0
(a) One and two (b) Two and three
(c) 1 (d)
(c) Three and two (d) one and three
2
MCQ MEDIUM
10. A system is shown in below
If R(s) is unit impulse input, the rise time and The system parameter ‘K’ is ______.
settling time for this system is
(a) 0.22 s, 0.4 s (b) 0.4 s, 0.22 s
(c) 0.22 s, 0.12 s (d) 0.12 s, 0.22 s
NAT EASY
14. A control system is defined by the following
mathematical relationship
NAT EASY
11. The transfer function for a single loop non – unity
d2 x
dt 2
dx
(
+ 6 + 5x = 12 1 − e−2t
dt
)
negative feedback control system is
The response x(t) of the system as t → is ______.
1
G (s) =
s +s+2
2 NAT MEDIUM
15. A thermometer is characterized by a first order
1
H (s ) = system. The thermometer requires 1 minute to
(s + 1) indicate 98% of the response to a step input. The time
constant (T) of the system is _______ sec.
The steady state output due to unit step input is
_______.
3
Answer Key
1. (d) 10. (a)
2. (b) 11. (0.33)
3. (b) 12. (1)
4. (d) 13. (10)
5. (c) 14. (2.4)
6. (c) 15. (15.33)
7. (d)
8. (c)
9. (c)