Professional Documents
Culture Documents
Electric Starting System - Test
Electric Starting System - Test
Electric Starting System - Test
Shutdown SIS
Previous Screen
i01833081
Most of the tests of the electrical system can be done on the engine. The wiring insulation must be in
good condition. The wire and cable connections must be clean, and both components must be tight.
The battery must be fully charged. If the on-engine test shows a defect in a component, remove the
component for more testing.
z Keyswitch
z Start relay
z Starting motor
Trouble with the starting system could be caused by the battery or by charging system problems. If
the starting system is suspect, refer to Service Manual, SENR3581, "37-MT, 41-MT & 42-MT Series
Starting Motors". This publication contains troubleshooting for the starting system, test procedures,
and specifications.
Copyright 1993 - 2011 Caterpillar Inc. Wed Feb 9 08:11:50 EST 2011
All Rights Reserved.
Private Network For SIS Licensees.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw... 09/02/2011