Professional Documents
Culture Documents
Operating Instructions Gate Valve A
Operating Instructions Gate Valve A
Operating Instructions Gate Valve A
Operating Instructions
· Bi-directional
· Cast body No. of Turns · Bi-directional No. of Turns
No. of Turns · One body grease port, one 2000 to · Forged body 2000 to
· Uni-directional bonnet grease port or Size 5000 psi · No body ports, one Size 10000 psi 15000 psi
2000 to
· Cast body Size 5000 psi bleeder port, two body 5 1/8” 29 1/2 grease port on bonnet 2 1/16” 12 14
· Two body grease ports 1
2 /16” 13 sealant ports 6 1/8” 34 1/2 · Backseat capability 9
2 /16” 14 15 1/2
· Packing injection fitting 2 9/16” 15 1/2” · Packing injection fitting and · Oval handwheel 3 1/16” 18 1/2 19
6 3/8” 35 1/2
· No backseat capability backseat capability (butterfly handwheels
1 1 1
· Butterfly handwheel 3 /8” 20 · Oval handwheel (butterfly handwheels phased out) phased out) 4 /16” 23 /2
· 2 1/16” to 4 1/16“ 1
4 /16” 1
24 /2” · 5 1/8” and 7 1/16” x 6 1/8” or 6 3/8” bore · 2 1/16” to 5 1/8” 1
5 /8” 29
Many service problems with gate valves occur from improper operation. Never throttle a gate valve in the partially open position or extensive damage will
occur. Lubricate the stem bearings and valve body a minimum of twice per year or every 15 to 20 cycles, and prior to ‘shutting-in’ a well.
To operate: Turn handwheel counterclockwise to open and clockwise to close. Snug up the Model ‘A’ handwheel or backoff the Model ‘B’ / ‘SL’ handwheel
after the gate stops.
Operating instructions also apply to gate valves integral with composite block valves and CPTs.