Professional Documents
Culture Documents
Group 1 DC Generators QnA
Group 1 DC Generators QnA
a. DC Machine
b. DC Generator
c. DC Motor
d. AC Generator
2.) Are used in a system to achieve smooth movement between the different components.
a. Brushes
b. Yoke
c. Bearings
d. Rotor
3.) The ending parts of the mainframe with a function to protect the bearings.
a. End Housings
b. Stator
c. Shaft
d. Poles
4.) It is an iron or steel plate that is used primarily to disperse the magnetic flow and avoid the spinning
field coil from falling.
a. Pole shoe
b. Commutator
c. Magnetic Field
d. Poles
5.) The outer cover that not only provides mechanical protection to the whole inner assembly and fixes
them to the foundation of the machine, but also creates a path for the magnetic flow that the field
winding produces.
a. Commutator
b. Rotor
c. Yoke
d. Stator
6.) In Fleming’s right hand rule the thumb points towards the direction of the ______.
b. Magnetic Field
c. Magnetic Force
d. Yoke
7.) In Fleming’s right hand rule the forefinger points towards the direction of the ______.
b. Magnetic Field
c. Magnetic Force
d. Yoke
8.) Are devices that convert mechanical movements to electricity using their own magnetic fields.
b. Self-Excited DC Generator
b. Self-Excited DC Generator
10.) A long-shunt compound generator delivers a load current of 50 A at 500 V and has armature, series
field and shunt field resistances of 0.05 ohms, 0.03 ohms and 250 ohms respectively. What is the
generated voltage and the armature current. Allow 1 V per brush for contact drop.
a. 58 A ; 516.26 V
b. 54 A ; 526.16 V
c. 52 A ; 506.16 V
d. 50 A ; 566.26 V