Professional Documents
Culture Documents
Spec 1
Spec 1
Spec 1
(ORDERING DESCRIPTION)
1.0 GENERAL :
2.0 APPLICATION:
BHEL References :
AA 107 40 -Rev. No.07 / ASTM A 240, Type:321
BHEL order No,
Supplier’s References :
Name
Identification No.
Melt No.
Process of manufacture
Details of heat treatment.
Result of Tests:
Dimensional inspection.
Results of chemical analysis, mechanical tests.
CORPORATE PURCHASING SPECIFICATION AA10740
(ORDERING DESCRIPTION)
CHEMICAL COMPOSITION
C SI Mn Ni Cr S P Ti N
5(C+N)-
17.0-
<=0.08 <=0.75 <=2.0 9.0-12.0 <=0.030 <=0.045 0.70, 0.1
19.0
max
MECHANICAL PROPERTIES
Hardness Max
0.2% PS min UTS min Bend
% E1 min
N/MM2 N/mm2 test
BHN HRB
Supplier’s References :
Name
Identification No.
Melt No.
Process of manufacture
Details of heat treatment.
Result of Tests:
Dimensional inspection.
Results of chemical analysis, mechanical tests.
7.0 PACKING AND MARKING:
CHEMICAL COMPOSITION
C SI Mn Ni Cr S P N
0.08-0.15 <=1.0 <=1.0 <=0.75 11.5-13.5 <=0.030 <=0.040 -
MECHANICAL PROPERTIES
Hardness Max 0.2% PS min Bend
UTS min N/mm2 % E1 min
BHN HRB N/MM2 test
217 96 205 450 20 180
PAGE : 4/11
HY10786
TECHNICAL REQUIREMENT DOCUMENT
REV. NO. 00
HY10786
TECHNICAL REQUIREMENT DOCUMENT
REV. NO. 00
Width, mm Tolerance, mm
- 250 5 0
250 500 5 0
500 1000 10 0
1000 1250 10 0
5.2.2.3 Camber:
Width, mm Maximum value of Camber for any
From Below 2000 mm length, mm
- 250 10
250 500 8
500 1000 5
1000 1250 5
PAGE : 6/11
HY10786
TECHNICAL REQUIREMENT DOCUMENT
REV. NO. 00
Element C SI Mn Ni Cr P S N
Permissible
variation in + 0.15 +/- +0.005
0.005 0.05 0.04 +0.005 0.01
Product - 0.10 0.20
Analysis
10.2 Mechanical Testing: One sample shall be taken per melt per heat
treatment batch per thickness.
10.3 Intergranular Corrosion Test: One sample per melt per heat
treatment batch per thickness.
HY10786
TECHNICAL REQUIREMENT DOCUMENT
REV. NO. 00
15.2 Sheets and strips shall be bundled together and each bundle shall
have details of Purchase Order No., Specification, Size, Melt No.,
Weight and Manufacturer’s Name etc.
Vendor shall indicate range of sizes which can be supplied for various
thicknesses agaisnt this spec. Separate sheet can be attached.
R
CORPORATE PURCHASING AA10739
HYDERABAD PAGE 1 OF 2
(ORDERING DESCRIPTION)
1.0 GENERAL :
The sheets, plates and strips shall conform to the latest version
of ASTM A 240, Type 304 and comply with the following
additional requirements.
2.0 APPLICATION:
BHEL References :
AA 107 39 -Rev. No.07 / ASTM A 240, Type:304
BHEL order No,
Supplier’s References :
Name
Identification No.
Melt No.
Process of manufacture
Details of heat treatment.
Result of Tests:
Dimensional inspection.
Results of chemical analysis, mechanical tests.
CORPORATE PURCHASING AA10739
HYDERABAD PAGE 1 OF 2
(ORDERING DESCRIPTION)
CHEMICAL COMPOSITION
C SI Mn Ni Cr S P N
8.0- 18.0 -
<=0.08 <=0.75 <=2.0 <=0.030 <=0.045 0.1
10.5 20.0
MECHANICAL PROPERTIES
Hardness Max
0.2% PS min
UTS min N/mm2 % E1 min Bend test
N/MM2
BHN HRB
HYDERABAD PAGE 1 OF 1
1.0 APPLICATION:
2.0 PROCESS :
3.0 MANUFACTURE :