Professional Documents
Culture Documents
Installation
Installation
Installation
Print Exit
PROCEDURE
a.
*a Paint Mark
Install the 2 air hoses to the differential pressure sensor, and slide the 2 clamps to secure the 2 hoses.
HINT:
Make sure the paint mark of the air hose side the differential pressure sensor.
b. Connect the 2 air hoses to the No. 1 vacuum pipe and No. 2 vacuum pipe, and slide the 2 clamps to secure
the 2 hoses.
c. Install the differential pressure sensor to the pipe clamp with the bolt.
Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-…anual/repair/contents/RM100000000MMTZ.html?PUB_TYPE=RM&MODE=1 Page 1 of 1