Professional Documents
Culture Documents
LRP - Assesment-Tool - Eim 11
LRP - Assesment-Tool - Eim 11
Department of Education
REGION III
SCHOOLS DIVISION OF BULACAN
DIRECTIONS: Read and analyze the following questions. Write the letter of the correct answer on
a separate sheet of paper.
________1. It is used to apply force on bent parts to straighten them. It can also do jobs such as press brushing in
and out and including pressing out the rivets.
A. Car lifts C. Hydraulic Press
B. Electric Drill D. Pull Push Tape
________2. It has an electric motor that drives a chuck that has jaws that open and close to grip a drill kit.
A. Car lifts C. Hydraulic Press
B. Electric Drill D. Pull Push Tape
________3. It is used to measure longer distances available from one meter to 50 meters long.
A. Car lifts C. Hydraulic Press
B. Electric Drill D. Pull Push Tape
________4. They have pads that must be placed under the designated lift points of the car frame.
A. Car lifts C. Hydraulic Press
B. Electric Drill D. Pull Push Tape
________5. It uses reciprocating motion to drive a cutting hammering tool.
A. Air Chisel C. Marking gauge
B. Air Drill D. Screw Drivers
________6. It is lighter than a portable electric drill. Repeated stalling or overloading does not damage or overheat
the drill.
A. Air Chisel C. Marking gauge
B. Air Drill D. Screw Drivers
________7. It is a tool most appropriate in making lines parallel with the edges of the wood.
A. Air Chisel C. Marking gauge
B. Air Drill D. Screw Drivers
________8. It is used to turn screws, nuts and bolts with hexagonal heads.
A. Air Chisel C. Marking gauge
B. Air Drill D. Screw Drivers
________9. It is used for lifting the engine out of the car. It is operated hydraulically by a hand pump.
A. Grinding Wheels C. Portable Crane
B. Marking gauge D. Screw Drivers
_______10. It can be either bench-mounted or pedestal installed.
A. Grinding Wheels C. Portable Crane
B. Marking gauge D. Screw Drivers
_______11. Uses compressed air to flow into the jack cylinder and causes the ram to extend and raise the vehicle.
A. Hand Tools C. Screw Drivers
Republic of the Philippines
Department of Education
REGION III
SCHOOLS DIVISION OF BULACAN
_______14. A tool used to turn screws, nuts and bolts with hexagonal heads.
A. Hand Tools C. Screw Drivers
B. Pneumatic Floor Jack D. Wrenches
_______15. A tool used to remove gears and hubs from shafts, bushings from blind holes, and cylinders’ liners from
the engine blocks.
A. Air Drill C. Pullers
B. PPE D. Vacuum Cleaner
_______16. This is used for cleaning the floor and car interiors after service.
A. Air Drill C. Pullers
B. PPE D. Vacuum Cleaner
_______17. This is lighter than a comparable electric drill. Repeatedly stalling or overloading does not damage or
overheat the air drill.
A. Air Drill C. Pullers
B. PPE D. Vacuum Cleaner
_______18. A gadget that protects workers from injury or illness caused by having contact with the
dangers/hazards in the workplace.
A. Air Drill C. Pullers
B. PPE D. Vacuum Cleaner
_______19. This wrench uses compressed air to quickly and powerfully turn nuts, bolts, and other objects.
A. Air Drill C. Pneumatic Torque Wrench
B. Machine/ Power Tools D.PPE
_______20. These are tools manipulated by our hands and with the use of electrical energy.
A. Air Drill C. Pullers
B. PPE D. Vacuum Cleaner
________21. It is used to wash dust in the floor, walls.
A. Detergent Soap C. Kerosene
B. Gasoline D. Water
_________22. It is used to wash/clean benches, tables, cabinets, etc.
A. Detergent Soap C. Kerosene
B. Gasoline D. Water
_______34. It is a tool used to turn screws, nuts and bolts with hexagonal heads.
A. Hand Tools C. Screw Drivers
B. Pneumatic Floor Jack D. Wrenches
_______35. It used to remove gears and hubs from shafts.
A. Air Drill C. Pullers
B. PPE D. Vacuum Cleaner
_______36. It is used for cleaning the floor and car interiors after service.
A. Air Drill C. Pullers
B .PPE D. Vacuum Cleaner
_______37. This is lighter than a comparable electric drill.
Republic of the Philippines
Department of Education
REGION III
SCHOOLS DIVISION OF BULACAN
_______42. B. Caution
_______43. C. Danger
_______46. F. Prohibition
_______48. H. Switch
_______49. I. Warning